Please use Option "HWcursor" "No"
in your device section. Egbert. Damon Meledones writes: > Regarding: display bugs with Xaa, chips (C&T65555) & XFree86-4.2.1 > Email: [EMAIL PROTECTED] > ------------------------------------------------------------ > XFree86 Version: XFree86 Version 4.2.1 (Debian 4.2.1-3 20021016191246 >[EMAIL PROTECTED]) > > OS: Debian Linux (kernel 2.4.18 i686 ELF) > > Area: Xserver > > Server: XFree86 (The XFree86 4.x server) > > Server: chips > > Video Card: > > -[from scanpci]- > pci bus 0x0000 cardnum 0x04 function 0x00: vendor 0x102c device 0x00e5 > C&T 65555 > CardVendor 0x1179 card 0x0001 (Toshiba 4010CDT CT65555) > STATUS 0x0280 COMMAND 0x0083 > CLASS 0x03 0x00 0x00 REVISION 0xc6 > BASE0 0xfe000000 addr 0xfe000000 MEM > -[other]- > The card's clocks and other info are in the server output below. > > Description: > > -[description]- > Whenever you do something heavy on graphics like scrooling, moving windows around, >using drop-down menus, etc the display in the area of the screen where the action was >taking place becomes interlaced (black lines every other row of pixels) and contains >a mix of what should be there now, and what was there before you did the action. >This just showed up in version 4.2.1, I have tried the Debian -3 and -5 revisions, >and it is in each. The problem does not show in version 4.1.0. > -[/var/log/XFree86.0.log]- > > XFree86 Version 4.2.1 (Debian 4.2.1-3 20021016191246 [EMAIL PROTECTED]) / X >Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 3 September 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.18 i686 [ELF] > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Thu Feb 20 21:26:26 2003 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "800x600 18-bit TFT LCD" > (**) | |-->Device "C&T 65555" > (**) |-->Input Device "Generic Keyboard" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc104" > (**) XKB: model: "pc104" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) |-->Input Device "Configured Mouse" > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. > Entry deleted from font path. > (**) FontPath set to >"/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7192 card 1179,0001 rev 02 class 06,00,00 hdr 00 > (II) PCI: 00:02:0: chip 1179,060f card 4000,0000 rev 05 class 06,07,00 hdr 82 > (II) PCI: 00:02:1: chip 1179,060f card 4800,0000 rev 05 class 06,07,00 hdr 82 > (II) PCI: 00:04:0: chip 102c,00e5 card 1179,0001 rev c6 class 03,00,00 hdr 00 > (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80 > (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 > (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 > (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00 > (II) PCI: 00:0a:0: chip 1179,0701 card 1179,0001 rev 23 class 07,80,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (--) PCI:*(0:4:0) C&T 65555 rev 198, Mem @ 0xfe000000/24 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] > [1] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [2] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [3] -1 0 0x0000ffe0 - 0x0000ffff (0x20) IX[B] > [4] -1 0 0x00001000 - 0x0000100f (0x10) IX[B] > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] > [1] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [2] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [3] -1 0 0x0000ffe0 - 0x0000ffff (0x20) IX[B] > [4] -1 0 0x00001000 - 0x0000100f (0x10) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] > [6] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [9] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [10] -1 0 0x0000ffe0 - 0x0000ffff (0x20) IX[B] > [11] -1 0 0x00001000 - 0x0000100f (0x10) IX[B] > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) LoadModule: "bitmap" > (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Loading font Bitmap > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.1.10 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font FreeType > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Loading extension GLX > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension RECORD > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "chips" > (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o > (II) Module chips: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.3 > (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, > ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, > ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 > (II) Primary Device is: PCI 00:04:0 > (--) Assigning device section with no busID to primary device > (--) Chipset ct65555 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] > [6] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [9] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [10] -1 0 0x0000ffe0 - 0x0000ffff (0x20) IX[B] > [11] -1 0 0x00001000 - 0x0000100f (0x10) IX[B] > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] > [6] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [12] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [13] -1 0 0x0000ffe0 - 0x0000ffff (0x20) IX[B] > [14] -1 0 0x00001000 - 0x0000100f (0x10) IX[B] > [15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Reloading /usr/X11R6/lib/modules/libvbe.a > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) CHIPS(0): initializing int10 > (II) CHIPS(0): Primary V_BIOS segment is: 0xc000 > (II) CHIPS(0): VESA BIOS detected > (II) CHIPS(0): VESA VBE Version 2.0 > (II) CHIPS(0): VESA VBE Total Mem: 2048 kB > (II) CHIPS(0): VESA VBE OEM: CHIPS 6x555 Super VGA > (II) CHIPS(0): VESA VBE OEM Software Rev: 1.0 > (II) CHIPS(0): VESA VBE OEM Vendor: Chips & Technologies, Inc. > (II) CHIPS(0): VESA VBE OEM Product: 6x555 Display Controller > (II) CHIPS(0): VESA VBE OEM Product Rev: 2 > (**) CHIPS(0): Depth 24, (--) framebuffer bpp 24 > (II) CHIPS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) CHIPS(0): RGB weight 888 > (==) CHIPS(0): Default visual is TrueColor > (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0) > (==) CHIPS(0): Using HW cursor > (**) CHIPS(0): Enabling linear addressing > (--) CHIPS(0): base address is set at 0xFE000000. > (**) CHIPS(0): Using MMIO > (--) CHIPS(0): VideoRAM: 2048 kByte > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) CHIPS(0): VESA VBE DDC supported > (II) CHIPS(0): VESA VBE DDC Level 2 > (II) CHIPS(0): VESA VBE DDC transfer in appr. 1 sec. > (II) CHIPS(0): VESA VBE DDC read successfully > (II) CHIPS(0): Manufacturer: TOS Model: 5081 Serial#: 0 > (II) CHIPS(0): Year: 1995 Week: 20 > (II) CHIPS(0): EDID Version: 1.0 > (II) CHIPS(0): Digital Display Input > (II) CHIPS(0): Max H-Image Size [cm]: horiz.: 23 vert.: 17 > (II) CHIPS(0): Gamma: 1.00 > (II) CHIPS(0): No DPMS capabilities specified; RGB/Color Display > (II) CHIPS(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000 > (II) CHIPS(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000 > (II) CHIPS(0): Supported VESA Video Modes: > (II) CHIPS(0): 640x480@60Hz > (II) CHIPS(0): 800x600@60Hz > (II) CHIPS(0): Manufacturer's mask: 0 > (--) CHIPS(0): TFT probed > (--) CHIPS(0): LCD > (--) CHIPS(0): Display Size: x=800; y=600 > (--) CHIPS(0): PCI Bus > (--) CHIPS(0): Internal DAC disabled > (--) CHIPS(0): Using programmable clocks > (--) CHIPS(0): Dot clock 0: 25.172 MHz > (--) CHIPS(0): Dot clock 1: 28.325 MHz CRTclk > (--) CHIPS(0): Dot clock 2: 40.090 MHz FPclk > (--) CHIPS(0): Probed memory clock of 50.113 MHz > (==) CHIPS(0): Min pixel clock is 11.000 MHz > (--) CHIPS(0): Max pixel clock is 46.772 MHz > (II) CHIPS(0): 800x600 18-bit TFT LCD: Using hsync range of 28.00-38.00 kHz > (II) CHIPS(0): 800x600 18-bit TFT LCD: Using vrefresh range of 43.00-72.00 Hz > (II) CHIPS(0): Clock range: 11.00 to 46.77 MHz > (II) CHIPS(0): Not using default mode "640x350" (vrefresh out of range) > (II) CHIPS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "640x400" (vrefresh out of range) > (II) CHIPS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "720x400" (vrefresh out of range) > (II) CHIPS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "640x480" (vrefresh out of range) > (II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "640x480" (vrefresh out of range) > (II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1152x864" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "832x624" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1024" (insufficient memory for mode) > (II) CHIPS(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) > (--) CHIPS(0): Virtual size is 800x600 (pitch 800) > (**) CHIPS(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) CHIPS(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync >+vsync > (**) CHIPS(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) CHIPS(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync >-vsync > (--) CHIPS(0): Display dimensions: (230, 170) mm > (--) CHIPS(0): DPI set to (88, 89) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (==) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xfe000000 - 0xfeffffff (0x1000000) MS[B] > [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [6] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] > [7] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [14] -1 0 0x0000ffe0 - 0x0000ffff (0x20) IX[B] > [15] -1 0 0x00001000 - 0x0000100f (0x10) IX[B] > [16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (==) CHIPS(0): Write-combining range (0xfe000000,0x200000) > (--) CHIPS(0): 657152 bytes off-screen memory available > (II) CHIPS(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > CPU to Screen color expansion > Screen to Screen color expansion > Solid Horizontal and Vertical Lines > Offscreen Pixmaps > Driver provided WritePixmap replacement > Setting up tile and stipple cache: > 11 128x128 slots > 32 8x8 color expansion slots > (==) CHIPS(0): Backing store disabled > (**) Option "dpms" > (**) CHIPS(0): DPMS enabled > (II) Setting vga for screen 0. > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Keyboard "Generic Keyboard" handled by legacy driver > (**) Option "Protocol" "PS/2" > (**) Configured Mouse: Protocol: "PS/2" > (**) Option "CorePointer" > (**) Configured Mouse: Core Pointer > (**) Option "Device" "/dev/psaux" > (**) Option "Emulate3Buttons" "true" > (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (==) Configured Mouse: Buttons: 3 > (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) > (II) PM Event received: Power Status Change > (II) PM Event received: Power Status Change > > > Repeat By: > > * Start the X server (usally with startx, but dosnt seem to matter). > * Open a graphics heavy program (mozilla 1.1 & 1.2 never fail to show this bug, the >KDE 3.1 control panel also works well). > * Move the wondow around (using show window contents while moving), use the menus, >scrool the text up and down, any of these work. > * Watch the text/dialog/window/menu/whatever go all to crap. > * Shutdown the X server. > * Add the line ``Option "XaaNoScreenToScreenCopy"'' to the Screen section of >XF86Config-4. > * Repeat the above steps, things are /very/ slow, but the display never craps out. > -[notes]- > First I tried the NoAccel option, and that fixed it, so I switched it for the >XaaNoScreenToScreenCopy otion, and it stayed away, I have not tried turning off any >of the other Xaa options. Below is the XF86Config-4 file used to generate the >logfile above. > -[XF86Config-4]- > ### BEGIN DEBCONF SECTION > # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the > # Debian X Configuration tool, using values from the debconf database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # If you want your changes to this file preserved by dexconf, only make changes > # before the "### BEGIN DEBCONF SECTION" line above, and/or after the > # "### END DEBCONF SECTION" line below. > # > # To change things within the debconf section, run the command: > # dpkg-reconfigure xserver-xfree86 > # as root. Also see "How do I add custom sections to a dexconf-generated > # XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz. > > Section "Files" > # FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "PS/2" > Option "Emulate3Buttons" "true" > EndSection > > #Section "InputDevice" > # Identifier "Generic Mouse" > # Driver "mouse" > # Option "SendCoreEvents" "true" > # Option "Device" "/dev/input/mice" > # Option "Protocol" "ImPS/2" > # Option "Emulate3Buttons" "true" > #EndSection > > Section "Device" > Identifier "C&T 65555" > Driver "chips" > EndSection > > Section "Monitor" > Identifier "800x600 18-bit TFT LCD" > HorizSync 28-38 > VertRefresh 43-72 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "C&T 65555" > Monitor "800x600 18-bit TFT LCD" > DefaultDepth 24 > SubSection "Display" > Depth 1 > Modes "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "800x600" "640x480" > EndSubSection > #Option "XaaNoScreenToScreenCopy" > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > # InputDevice "Generic Mouse" > EndSection > > ### END DEBCONF SECTION > > _______________________________________________ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
