hi folks,
i just downloaded the new 4.3.0 code an compiled and installed it on my
redhat 8.0 machine without any problems.
my video card has a radeon 7000 ve chip with two monitor (crt)
connectors. dual head support works, i am using it with xinerama turned
on. but now the problem:
although i am using linux 98% of the time, unfortunatly i have to use
windows sometimes. regardless what version of windoze i am using my
"better" monitor is used an recognised as the primary monitor i.e. there
the login screen appears. when booting linux the text screen appears
immediatly on both monitors but then the login screen appears on my
"older" monitor. using gonme i am able to use panels, in their
properties i can choose the "current screen", and my "better" one is
listed as "1", the "older" as "0". -> the other way round than in
windows. as windows has no option to change the order for the login, i
tried to change it in linux. i tried out any combination in the section
"serverlayout" (with different "leftof"/"rightof" and screen "starts"),
an (i think) all combinations of identifiers (means "screen0" <->
"screen1", ...) in sections "monitor", "device" and "screen" but all
these had no effect at all!
so my question: what do i have to do to change the order??
any hints much appreciated!
attached is my /etc/X11/XF86Config
thanx
markus
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Screen "Screen0" 0 0
Screen "Screen1" LeftOf "Screen0"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "ServerFlags"
Option "Xinerama" "on"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Video7"
ModelName "S96"
HorizSync 31.5 - 92.0
VertRefresh 50.0 - 120.0
ModeLine "1400x1050" 129.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 151.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 162.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 184.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
# Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Belinea"
ModelName "10 70 40"
HorizSync 31.5 - 85.0
VertRefresh 50.0 - 120.0
ModeLine "1400x1050" 129.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 151.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 162.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 184.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
# Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "ATI"
BoardName "Radeon 7000"
Option "AGPMode" "4"
BusID "1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Videocard1"
Driver "radeon"
VendorName "ATI"
BoardName "Radeon 7000"
Option "AGPMode" "4"
BusID "1:0:0"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Black 0x0000 0x0000 0x0000
White 0x0000 0x0000 0x0000
Modes "1400x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 16
SubSection "Display"
Depth 16
Black 0x0000 0x0000 0x0000
White 0x0000 0x0000 0x0000
Modes "1400x1050"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
