Hi all, Please cc me when replying, I'm not subscribed. i've found in the documentation that the sis 5597 is not supported by XFree 4.x but i was able to run it with the sis driver "xfree 4.1 - Debian woody" Is there anything wrong/strange here ? or is the mistake from my side ?
quoted the appropriate sections from /var/log/XFree86.0.log & /etc/X11/XF86Config-4
"to avoid sending large attachments ;)"
/etc/X11/XF86Config-4
Section "Device"
Identifier "Generic Video Card"
Driver "sis"
EndSection
then:
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
/var/log/XFree86.0.log
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 5 20:04:33 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000480c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,5597 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,5513 card 0000,0000 rev d0 class 01,01,8a hdr 80
(II) PCI: 00:01:2: chip 1039,7001 card 0000,0000 rev 10 class 0c,03,10 hdr 80
(II) PCI: 00:09:0: chip 1013,6005 card 0000,0000 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:13:0: chip 1039,0200 card 1039,0000 rev 65 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:19:0) SiS 5597 rev 101, Mem @ 0xe7800000/22, 0xe5000000/16, I/O @ 0xb800/7
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326,
SIS300, SIS630, SIS540
(II) Primary Device is: PCI 00:13:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS5597 found
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(==) SIS(0): Removed MMIO write-combining range (0xa0000,0x20000)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) SIS(0): Depth 16, (--) framebuffer bpp 16
(==) SIS(0): RGB weight 565
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(==) SIS(0): Using HW cursor
(==) SIS(0): PCI retry enabled
(==) SIS(0): Fast VRAM enabled
(==) SIS(0): TurboQueue enabled
(--) SIS(0): Detected memory clock : 59.956MHz
(--) SIS(0): Linear framebuffer at 0xE7800000
(--) SIS(0): MMIO registers at 0xE5000000
(--) SIS(0): Relocate IO registers at 0xB800
(--) SIS(0): VideoRAM: 4096 KB
(==) SIS(0): Min pixel clock is 16 MHz
(--) SIS(0): Max pixel clock is 479 MHz
(II) SIS(0): Generic Monitor: Using hsync range of 28.00-48.00 kHz
(II) SIS(0): Generic Monitor: Using vrefresh range of 70.00-90.00 Hz
(II) SIS(0): Clock range: 16.25 to 479.65 MHz
(--) SIS(0): Virtual size is 800x600 (pitch 800)
(**) SIS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync
+vsync
(**) SIS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) SIS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(==) SIS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.4
(II) SIS(0): Accel Enable
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 2.0
(II) SIS(0): VESA VBE Total Mem: 4096 kB
(II) SIS(0): VESA VBE OEM: SiS super VGA chip.
(II) SIS(0): VESA VBE OEM Software Rev: 0.8
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: SiS 5597
(II) SIS(0): VESA VBE OEM Product Rev:
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) SIS(0): VESA VBE DDC supported
(II) SIS(0): VESA VBE DDC Level none
(II) SIS(0): VESA VBE DDC transfer in appr. 0 sec.
(II) SIS(0): VESA VBE DDC read failed
(II) do I need RAC? No, I don't.
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
13 256x256 slots
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(**) Option "dpms"
(**) SIS(0): DPMS enabled
(II) SIS(0): direct rendering disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
GetModeLine - scrn: 0 clock: 49500
GetModeLine - hdsp: 800 hbeg: 816 hend: 896 httl: 1056
vdsp: 600 vbeg: 601 vend: 604 vttl: 625 flags: 5
(II) SIS(0): SISDisplayPowerManagementSet(0)
GetModeLine - scrn: 0 clock: 49500
GetModeLine - hdsp: 800 hbeg: 816 hend: 896 httl: 1056
vdsp: 600 vbeg: 601 vend: 604 vttl: 625 flags: 5
GetModeLine - scrn: 0 clock: 49500
GetModeLine - hdsp: 800 hbeg: 816 hend: 896 httl: 1056
vdsp: 600 vbeg: 601 vend: 604 vttl: 625 flags: 5
GetModeLine - scrn: 0 clock: 49500
GetModeLine - hdsp: 800 hbeg: 816 hend: 896 httl: 1056
vdsp: 600 vbeg: 601 vend: 604 vttl: 625 flags: 5
(II) Open APM successful
(II) Open APM successful
--
----------------
-- Katoob Main Developer
Linux registered user # 224950
ICQ # 58475622
FIRST make it run, THEN make it run fast "Brian Kernighan".
pgp00000.pgp
Description: PGP signature
