* Yang Yang ([EMAIL PROTECTED]) wrote: > I didnt' try framebuffer, just used dri
Uuuughhh.., thats wrong :-) Look here: http://deimos.one.pl/ftp/radeonfb/ (it's works fine with 2.4.20-ac2, because there're some "hacks" in radeonfb, DRM, etc... {you don't need to change /dev/ttyX after setting something on /dev/fb0, or even using fbi - the screen is refreshing automaticly, slowly but in right way.}) > my motherboard is ASUS A7M266, card is Radeon 9000 (r250?) So it's probably the VIA-KT-266, so your radeon_rv250{reversion: I{d|e|f|g}} will supose to work fine with: http://cpbotha.net/files/dri_resume/radeon-cpbotha-20030302-linux.xfree86-4.3.0.i386.tar.bz2 There's DRM (to change kernel CONFIG_DRM_RADEON module) and DRI to replace libGL.so :-) Od CVS version of DRM (1.8.0): http://cpbotha.net/files/dri_resume/radeon-cpbotha-20030302-linux.DRI.i386.tar.bz2 P.S. To see what your card is, make: .~. # lspci | grep ATI 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) 01:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01) .~. # .~. # dmesg | grep radeon radeonfb: ref_clk=2700, ref_div=12, xclk=20000 from BIOS radeonfb: MTRR enabled radeonfb: ATI Radeon 9000 If DDR SGRAM 64 MB radeonfb: DVI port no monitor connected radeonfb: CRT port CRT monitor connected [drm] Initialized radeon 1.7.0 20020828 on minor 0 .~. # .~. # cat /proc/fb 0 Radeon 9000 If .~. # Good luck :-) -- # Damian *dEiMoS* Kołkowski # http://deimos.one.pl/ # _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
