Thanks, Trevor for your response. According to
http://support.intel.com/support/graphics/linux/graphics.htm I needed to
install the kernel headers and extract the downloaded driver.  The driver in
the document is 20030106-i386, but the only file available for download is
i830-20030106-i386.  I must have done something wrong because when I
attempted to extract that one it failed with "cannot change ownership"
errors.  I was logged in as root. Any help I can get would be great because
this is my first install and it is very disheartening - I have spoken with
Red Hat Support (this card is not supported) and Intel Support has never
replied. 

This desktop will be the file and print server for one of our remote sites,
so it doesn't need to be anything fancy.

Thanks,

Karen

Date: Wed, 19 Mar 2003 12:48:25 -0500
From: Trever Furnish <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Red Hat Linux installation error
Reply-To: [EMAIL PROTECTED]

The XF86Config file that got generated was probably for version 3 of X 
and you're running version 4 from startx...or something like that.  I'm 
not clear on how rh7.3 chooses between them.  Redhat puts the X config 
at the end of the setup though, so the rest of your install is probably 
ok - you just need to configure X properly after the install.

Problem though - the 845G card doesn't seem to work well until the 
December 9th, 2002 version of X 4.2.  Until then, it had periodic 
lock-ups when running dri (at least for me).

If you don't want dri (3d accel), then you may be able to get by with 
just installing the 82845G driver from Intel (available from their 
website).  You'll need to have the kernel-source package installed (or 
is it kernel-headers?  i forget) and need to update the kernel beyond 
the stock rh7.3 kernel.  They have packages for 2.4.9-31 available from 
their updates.redhat.com ftp site.  And you'll still need to make a 
valid config file.  Try running "X -configure" - if that doesn't work, I 
can send you a config that works for me, but my monitor and screens will 
be different.

--
Trever


Hamelinck, Karen wrote:

>Ladies/Gentlemen:
>
>I am trying to load Red Hat Linux 7.3 Pro on an IBM 831027U with an Intel
>82845G Video Card and an IBM E74 Monitor.  When I get to the part where I
>have to click on the Test Setting button for the resolution, the screen
goes
>blank.
>
>When I reboot, I can log in at the localhost login, and when I issue
>"startx" I get 'Fatal Server Error: no screens found' and this e-mail
>address to send the following file:
>
> <<XFREE86.0>> 
>Thanks,
>
>Karen Hamelinck
>Technical Services Manager
>Standard Corporation, A UTi Worldwide Company
>1501 Main Street, Suite 400
>Columbia, SC 29201
>803.540.3706

_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to