* Melissa Golter ([EMAIL PROTECTED]) wrote: > have tried what u suggest, but unfortutely startx won't work when i do > that.
:-) It works for me (with slackware 9.0.0). > I even called Sony (Sony doesn't support but sugested that mebbe someone > had written a patch). I am Not sure why under rh7.3 I Could successfully > do as you say (albeit with no improvement in performance), but under rh8.0 > startx crashes. > > redhat-config-xfree86 log is attached, included on > ftp.evl.uic.edu/pub/OUTgoing/mgolter/xfree/ There is no config. P.S. You have: drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed So there is no DRM module in the kernel :-) .~. # dmesg | grep drm [drm] AGP 0.99 on VIA Apollo KT400 @ 0xd0000000 128MB [drm] Initialized radeon 1.7.0 20020828 on minor 0 .~. # .~. # cat /proc/fb 0 Radeon 9000 If .~. # .~. # dmesg | grep radeon radeonfb: ref_clk=2700, ref_div=12, xclk=20000 from BIOS radeonfb: MTRR enabled radeonfb: ATI Radeon 9000 If DDR SGRAM 64 MB radeonfb: DVI port no monitor connected radeonfb: CRT port CRT monitor connected [drm] Initialized radeon 1.7.0 20020828 on minor 0 .~. # Simple test (in X-4.3.0): X -configure PP.S My XF86Config file is here: http://deimos.one.pl/ftp/conf/XF86Config_xfree86-4.3.0 -- # Damian *dEiMoS* Kołkowski # http://deimos.one.pl/ # _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
