On Tuesday 25 March 2003 16:43, Richard Garland wrote: You need modelines to set refreshrate >85hz
try this tool: http://xtiming.sourceforge.net/cgi-bin/xtiming.pl > Hi all: > > Been trying to get this configuration working - so far, no luck. > I am able to get the X running and have had it running at 1600x1200 > resolution. The problem is the refresh rate - the screen flickers > > Working with a Dell Latitude laptop, 1.8GHz / 1GB RAM > Has a Radeon 7500 video card. Using a SUN OEM monitor model GDM 5010PT. The > tube model is Sony 365-1383-01. > > I have been playing with the X config files and modifying the Hori/Vert > rates but when X starts up it seems to have no effect on the rates on the > monitor. > Initial research I have done indicate that the monitor is a multisync - so > why can't I adjust the sync rates? > > > > Rick Garland > Sr UNIX Systems Administrator > > email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > Tel: 303-446-9000 ext 22472 > Fax: 303-685-8187 > Cell: 303-887-3715 > > Mincom. The People. The Experience. The Vision. > > This transmission is for the intended addressee only and is confidential > information. If you have received this transmission in error, please notify > the sender and delete the transmission. The contents of this e-mail are the > opinion of the writer only and are not endorsed by the Mincom Group of > companies unless expressly stated otherwise. _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
