Hi!
I have just installed RH 7.1 in server mode using a quickstart
installation and when , after the xconfigurator, I reboot the system it
is not able to start in the x-window mode.
Anyway, I enter as root in shell mode and try to xstart and I have this
message in return:
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.17-8smp i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Fri May 30 12:54:44 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "PHILIPS 107E"
(**) | |-->Device "My Video Card"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: layout: "es"
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:2:0) Intel i815 rev 2, Mem @ 0xf8000000/26, 0xffa80000/19
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) v4l driver for Video4Linux
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815
(--) Assigning device section with no busID to primary device
(--) Chipset i815 found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
(**) I810(0): Depth 16, (--) framebuffer bpp 16
(==) I810(0): RGB weight 565
(==) I810(0): Default visual is TrueColor
(--) I810(0): Chipset: "i815"
(--) I810(0): Linear framebuffer at 0xF8000000
(--) I810(0): IO registers at addr 0xFFA80000
(**) I810(0): Will alloc AGP framebuffer: 4096 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): PHILIPS 107E: Using hsync range of 30.00-70.00 kHz
(II) I810(0): PHILIPS 107E: Using vrefresh range of 50.00-160.00 Hz
(II) I810(0): Clock range: 12.00 to 163.00 MHz
(WW) I810(0): Default mode "1024x768" deleted (unknown reason)
(WW) I810(0): Default mode "1280x960" deleted (hsync out of range)
(WW) I810(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) I810(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) I810(0): Default mode "1400x1050" deleted (hsync out of range)
(WW) I810(0): Default mode "1400x1050" deleted (hsync out of range)
(WW) I810(0): Default mode "1400x1050" deleted (bad mode
clock/interlace/doublescan)
(WW) I810(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) I810(0): Default mode "1600x1200" deleted (bad mode
clock/interlace/doublescan)
(WW) I810(0): Default mode "1600x1200" deleted (bad mode
clock/interlace/doublescan)
(WW) I810(0): Default mode "1600x1200" deleted (bad mode
clock/interlace/doublescan)
(WW) I810(0): Default mode "1600x1200" deleted (bad mode
clock/interlace/doublescan)
(WW) I810(0): Default mode "1792x1344" deleted (insufficient memory for
mode)
(WW) I810(0): Default mode "1792x1344" deleted (insufficient memory for
mode)
(WW) I810(0): Default mode "1856x1392" deleted (insufficient memory for
mode)
(WW) I810(0): Default mode "1856x1392" deleted (insufficient memory for
mode)
(WW) I810(0): Default mode "1920x1440" deleted (insufficient memory for
mode)
(WW) I810(0): Default mode "1920x1440" deleted (insufficient memory for
mode)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(==) I810(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
Symbol VBEInit from module /usr/X11R6/lib/modules/drivers/i810_drv.o is
unresolved!
Symbol vbeDoEDID from module /usr/X11R6/lib/modules/drivers/i810_drv.o
is unresolved!
(0): [drm] created "i810" driver at busid "PCI:0:2:0"
(0): [drm] added 4096 byte SAREA at 0xc5921000
(0): [drm] mapped SAREA 0xc5921000 to 0x40018000
(0): [drm] framebuffer handle = 0xf8000000
(0): [drm] added 1 reserved context for kernel
(II) I810(0): [drm] Registers = 0xffa80000
(II) I810(0): dcacheHandle : (nil)
(II) I810(0): GART: no dcache memory found
(II) I810(0): Bound backbuffer memory
(II) I810(0): Bound depthbuffer memory
(II) I810(0): GART: Allocated 4K for mouse cursor image
(II) I810(0): Adding 768 scanlines for pixmap caching
(WW) I810(0): Framebuffer allocation failed
(0): [drm] failed to remove DRM signal handler
(0): [drm] removed 1 reserved context for kernel
DRIUnlock called when not locked
(0): [drm] unmapping 4096 bytes of SAREA 0xc5921000 at 0x40018000
(==) I810(0): Write-combining range (0xf8000000,0x2000000)
(II) I810(0): Setting dot clock to 94.5 MHz [ 0x3d 0xe 0x20 ] [ 63 16 2
]
(II) I810(0): chose watermark 0x22210000: (tab.freq 94.5)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): Adding 768 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
24 128x128 slots
6 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) I810(0): DPMS enabled
(II) I810(0): direct rendering: Disabled
(**) Mouse0: Protocol: "PS/2"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
The only mode I have to start the x-mode is to write:
./xfs start -droppriv
What can I do to ensure my system to start automatically in x-mode?
Ps: This is our first contact with RH and linux, :oP. If you need more
information ask for it.
Thanks
David
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
