(II) R128(0): Monitor0: Using hsync range of 31.50-48.50 kHz
(II) R128(0): Monitor0: Using vrefresh range of 40.00-70.00 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
Your hsync range is not large and this is causing a lot of your modes to be
rejected.
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
If you can open this up that might allow these modes to work. There are
other modes available but many are failing with (no mode of this name) as
the explanation. Perhaps they need to be specified in your config file?
Others are failing because you don't have enough (video) memory, probably
for the color depth you specified, so it may be worth trying lower color
depths. A few fail due to vrefresh and mode clock settings.
You've got 8K of video memory.
VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1).
Looks like you're trying to do 24 bits.
(**) R128(0): Depth 24, (--) framebuffer bpp 32
It may (or may not) be worth generating some custom modelines and trying
those. Use the gtf utility included with X if you want to try this out.
Good luck,
cyn
-----Original Message-----
From: larry canonga [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 04, 2003 1:41 AM
To: [EMAIL PROTECTED]
Subject: [XFree86] Config question
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
