On Fri, 13 Jun 2003, Emmanuel wrote: > On 2003.06.13 06:50, Gavin McCullagh wrote: > > > >I've got a Shuttle SB51G with the optional CV21 TV Out module. > > > >With TV, the initial boot sequence gives a bunch of resolution options > >or "scan" to probe. Several options work but they all amount to it > >using 640x480 or 800x600 neither of which fills the TV screen (the > >latter naturally comes a little closer). X just uses the same area > >which was used by the boot sequence. > > For the savage driver there is a "TV" option (or something approaching) > and you can use it to specify NTSC or PAL output (to see if your driver > has this option have a look at its man page). Moreover you can also > change the modelines to have better matching display.
The driver I'm using is i810. As far as I understand this is the one correct one. http://www.xfree.org/4.3.0/i810.4.html Neither of those options seem to be there. All supported options would be listed there right? Gavin _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86