i have an epia-m6000 motherboard with the cle266 graphics chipset. I noticed
that this chipset is included in xfree 4.3.99. I did a complete new build,
and install. After i start xfree, i get my login screen xdm, with a perfect
resolution and timing, but i don't get keyboard / mouse access ( no response
at all ). These are both ps/2 devices. My kernel is version 2.4.19 . The tail
of my log files is this
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Couldn't load XKB keymap, falling back to pre-XKB keymap
(II) Server_Terminate keybinding not found
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing
from list!
config file
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# Option "AutoRepeat" "500 30"
# Option "XkbRules" "xfree86"
# Option "XkbKeycodes" "xfree86"
# Option "XkbModel" "pc104"
# Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
Identifier "ctx"
HorizSync 30 - 72
VertRefresh 55-130
#Refresh Rate 60Hz
ModeLine "720x480" 26.7 720 736 808 896 480 481 484 497
ModeLine "720x576" 32.7 720 744 816 912 576 577 580 597
ModeLine "848x480" 31.5 848 864 952 1056 480 481 484 497
ModeLine "856x480" 31.7 856 872 960 1064 480 481 484 497
ModeLine "1024x512" 41.3 1024 1056 1160 1296 512 513 516 531
ModeLine "1280x768" 80.1 1280 1344 1480 1680 768 769 772 795
ModeLine "1440x1050" 126.2 1440 1536 1688 1936 1050 1051 1054 1087
#Refresh Rate 75Hz
ModeLine "720x480" 34.9 720 752 824 928 480 481 484 502
ModeLine "720x576" 42.6 720 760 832 944 576 577 580 602
ModeLine "848x480" 41.0 848 880 968 1088 480 481 484 502
ModeLine "856x480" 41.3 856 888 976 1096 480 481 484 502
ModeLine "1024x512" 53.3 1024 1072 1176 1328 512 513 516 535
ModeLine "1280x768" 103.0 1280 1360 1496 1712 768 769 772 802
ModeLine "1440x1050" 160.0 1440 1536 1696 1952 1050 1051 1054 1096
#Refresh Rate 85Hz
ModeLine "1280x768" 118.5 1280 1368 1504 1728 768 769 772 807
ModeLine "1440x1050" 184.5 1440 1544 1704 1968 1050 1051 1054 1103
ModeLine "848x480" 47.4 848 888 976 1104 480 481 484 505
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "via"
Driver "via"
Option "SWcursor" "On"
# Option "ActiveDevice" "CRT"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "via"
Monitor "ctx"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "640x480" "800x600" "1280x1024"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "640x480" "800x600" "1280x1024"
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Server 1"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
