Hi! After installing the CVS version of XFree for support for my VIA Epia M-10000, X only do 640x480, and I can't change the resolution. My /etc/X11/XF86Config file: Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection
Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "extmod" Load "dbe" Load "dri" Load "glx" Load "record" Load "xtrap" Load "speedo" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/mouse" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "KFC CA/CB6748SL" HorizSync 30.0 - 86.0 VertRefresh 50.0 - 150.0 EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "A2" # [<bool>] #Option "NoAccel" # [<bool>] #Option "HWCursor" # [<bool>] #Option "SWCursor" # [<bool>] #Option "ShadowFB" # [<bool>] #Option "Rotate" # [<str>] #Option "UseBIOS" # [<bool>] #Option "ActiveDevice" # [<str>] #Option "Center" # [<bool>] #Option "PanelSize" # [<str>] #Option "TVDotCrawl" # [<bool>] #Option "TVType" # [<str>] #Option "TVOutput" # [<str>] #Option "TVVScan" # [<str>] #Option "TVHScale" # [<str>] #Option "TVEncoder" # [<str>] #Option "Refresh" # <i> #Option "DisableVQ" # [<bool>] #Option "NoDDCValue" # [<bool>] Identifier "Card0" Driver "via" VendorName "VIA Technologies, Inc." BoardName "VT8623 [Apollo CLE266] integrated CastleRock graphics" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 EndSubSection EndSection And when I start X, I get this i my Xfreelog: (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "....cut away" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (++) using VT number 7 ..[snip].. (II) via(0): Supported VESA Video Modes: (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (interlaced) (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] (II) via(0): [EMAIL PROTECTED] ..[snip].. (WW) via(0): Monitor0: Using default hsync range of 28.00-33.00kHz (WW) via(0): Monitor0: using default vrefresh range of 43.00-72.00Hz ..[snip].. (II) via(0): Not using default mode "1024x768" (hsync out of range) (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) via(0): Not using default mode "1024x768" (hsync out of range) (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) via(0): Not using default mode "1024x768" (hsync out of range) (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) via(0): Not using default mode "1024x768" (hsync out of range) (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) via(0): Not using default mode "1024x768" (hsync out of range) ..[snip].. (II) via(0): Not using mode "1024x768" (no mode of this name) (II) via(0): Not using mode "800x600" (no mode of this name) (--) via(0): Virtual size is 640x480 (pitch 640) (**) via(0): *Default mode "640x480": 25.2 MHz (scaled from 1410711.4 MHz), 31.5 kHz, 60.0 Hz (II) via(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (--) via(0): Display dimensions: (1610, 2550) mm (--) via(0): DPI set to (10, 4) ..[snip].. Why does it change my monitors hsync and vrefresh range, and why isn't there any "1024x768" mode? Please help - Christoffer _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86