You're using the wrong driver. In the /etc/X11/XF86Config,
in the Section "Device", replace Driver "vga" with Driver "nv".
Mark.
On Wed, 2 Jul 2003, Jon Gonzalez wrote:
> (--) PCI:*(1:0:0) nVidia Corporation NV17 [GeForce4 MX 420] rev 163, Mem @
> 0xfc000000/24, 0xf4000000/26, 0xf3f80000/19, BIOS @ 0x80000000/17
...
> (II) VGA(0): initializing int10.
> (==) VGA(0): Write-combining range (0xa0000,0x20000) was already clear
> (==) VGA(0): Write-combining range (0xc0000,0x40000)
> (II) VGA(0): Primary V_BIOS segment is: 0xc000
> (==) VGA(0): Write-combining range (0x0,0x1000) was already clear
> (==) VGA(0): Write-combining range (0x0,0x1000) was already clear
> (EE) VGA(0): Driver can't support depth 24
> (II) UnloadModule: "vga"
> (II) UnloadModule: "int10"
> (II) Unloading /usr/X11R6/lib/modules/libint10.a
> (EE) Screen(s) found, but none have a usable configuration.
>
> Fatal server error:
> no screens found
>
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to [EMAIL PROTECTED]
>
> I thought I was using the wrong driver for the video card. i have a 64MB
> NVIDIA GeForce4 MX Graphics card with TV-Out.
> any help would be appreciated
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
