Hi After fiddling arround for quiet a while i could get the trident driver running, with my CyberBlade xp video card. I attached my XF86Config file.
My Problem now is, that it seems that the driver does not care about the entered screen resolution ( i tried a few and they showed axactly the same behaviour). The screen always ist about 4 times bigger that my display is (by the way it is not scrolling around if i move the mouse). The propper resolution should be 1024x768. But no matter what i set i get the same results. Any help would be appreciated. Regards -- Johannes Kuhn e-mail: [EMAIL PROTECTED] web: www.gruemelworld.de (under construction) icq#: 79218174 ~ __ Freedom of Choice 'v' / / __ __ __ __ __ __ __ // \\ / /__ / / / \/ / / /_/ / \ \/ / /( )\ /_____/ /_/ /_/\__/ /_____/ /_/\_\ ^`~'^ __________________________________________________
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Toshiba TOS5082"
DisplaySize 290 220
HorizSync 31.0 - 48.0
VertRefresh 50.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier "Trident CyberXP"
Driver "trident"
VendorName "Trident/Toshiba"
BoardName "CyberBlade/XP/Ai1"
ChipSet "cyberbladeXPAi1"
Option "CyberShadow" "false"
Option "ShadowFB" "true"
BusID "PCI:01:00:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Trident CyberXP"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1400x1050" "1024x768"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
