The log file you posted says:
(==) Using config file: "/etc/X11/XF86Config-4"
That config file is configured to use the "nv" driver.
Mark.
On Sun, 13 Jul 2003, Geoff Petzold wrote:
> Umm... thanks for your reply.
>
> In my XF86Config.new2 file isnt my device driver for the nVidia card set to
> nvidia? So wouldnt that mean that i am trying to use nvidias drivers and not
> the generic "nv" driver? I would agree with you but when i change my
> settings from nvidia to nv and also comment out the Load GLX i still get the
> same result... maybe ill try changing the s3 from s3virge to just s3 and see
> if that works...
>
> Thanks for the help tho
> Geoff
>
> On July 13, 2003 10:10 pm, Mark Vojkovich wrote:
> > Your modules are mixed up. You are trying to use the "nv"
> > driver that comes with XFree86 but you're trying to use the
> > "glx" module that comes with NVIDIA's binary drivers. If you
> > want to use the "nv" driver you need to uninstall NVIDIA's
> > binary drivers (or at least remove NVIDIA's
> > /usr/X11R6/lib/modules/extensions/libglx.so and
> > /usr/X11R6/lib/modules/drivers/nvidia_drv.o).
> >
> >
> > Mark.
> >
> > On Sun, 13 Jul 2003, Geoff Petzold wrote:
> > > Hello, I am having problems with setting up my system to use two video
> > > cards within Linux. I know that every message forum on Linux has had
> > > this discussion before but I have not found anything that helps my
> > > situation. (yet)
> > >
> > > I am running Mandrake 9.1 with XFree version 4.3.0
> > > My ideo cards are as follows:
> > > S3 ViRGE [PCI:0:9:0]
> > > nVidia GeForce2 [PCI:1:0:0]
> > >
> > > My problem is as follows:
> > >
> > > I start my Xserver by typing "X -xf86config /root/XF86Config.new2" and
> > > both monitors act as if they are recieving data, the nVidia driver comes
> > > up on the correct monitor and they both procede to show a blue screen
> > > that usually pops up just before the login screen of Mandrake. There is
> > > the cursor in the first monitor (screen0 i believe) and I can move it
> > > between the two monitors just like i can in WinXP. However this is where
> > > it stops. My mouse and keyboard both work and I have to press
> > > ctrl-alt-backspace to get back into a command line. I will also include
> > > a log file which the only error that i can see is a failure to load GLX
> > > error.
> > >
> > > If anyone can help me with this I would greatly appreciate it.
> > >
> > > Thanks
> > > Geoff
> > > --
> > > Geoff Petzold
> > > [EMAIL PROTECTED]
> > > [EMAIL PROTECTED]
> > > [EMAIL PROTECTED]
> >
> > _______________________________________________
> > XFree86 mailing list
> > [EMAIL PROTECTED]
> > http://XFree86.Org/mailman/listinfo/xfree86
>
> --
> Geoff Petzold
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> ###
> In order to reply to this email please remove
> _NOSPAM_ from the reply-to address.
> _______________________________________________
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
