I've spent the last few days trying to resolve this problem, and can't
get any further.
I run startx and the X server does not load up.
I've pasted the verbose output along with the /etc/X11/XF86Config.
Card is a NVidia Riva 128, with a Gateway monitor. X does work, as
i've used the vga driver with a depth of 8, obviously can't do
anything useful.
I noticed that there is an Xwrapper, but I don't know how this works.
I've tried running this as root and other users.
This is in /var/log/messages
/kernel: pid 634 (XFree86), uid 0: exited on signal 6
And some dmesg output. [agp support is compiled into the kernel.]
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia/SGS-Thomson Riva128 graphics accelerator> at 0.0 irq 9
$ ls -l /dev/agp*
crw------- 1 root wheel 148, 0 Jul 19 05:41 /dev/agpgart
$ startx -- -verbose
Using authority file /home/darren/.Xauthority
Writing authority file /home/darren/.Xauthority
Using authority file /home/darren/.Xauthority
Writing authority file /home/darren/.Xauthority
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 4.8 i386 [ELF]
Build Date: 23 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jul 20 19:24:26 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: model: "pc101"
(**) XKB: layout: "gb"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(--) PCI:*(1:0:0) NVidia / SGS Thomson (Joint Venture) Riva128 rev 16, Mem @
0x9c000000/24, 0x9a000000/24
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Vanta,
RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU,
GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro,
GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, 0x0300, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000, 0x0311, 0x0312,
0x0316, 0x0317, 0x0318, 0x0319, 0x031A, 0x031B, 0x031C, 0x031D,
0x031E, 0x031F, 0x0321, 0x0322, 0x0323, 0x0326, 0x032A, 0x032B,
0x032E
(--) Chipset RIVA 128 found
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) NV(0): Initializing int10
(==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NV(0): Write-combining range (0xc0000,0x40000)
(II) NV(0): Primary V_BIOS segment is: 0xc000
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(--) NV(0): Chipset: "RIVA 128"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0x9A000000
(--) NV(0): MMIO registers at 0x9C000000
(==) NV(0): Write-combining range (0x9ac00000,0x8000) was already clear
(==) NV(0): Write-combining range (0x9c680000,0x3000) was already clear
(==) NV(0): Write-combining range (0x9c100000,0x1000) was already clear
(==) NV(0): Write-combining range (0x9c002000,0x2000) was already clear
(==) NV(0): Write-combining range (0x9c400000,0x2000) was already clear
(==) NV(0): Write-combining range (0x9c101000,0x1000) was already clear
(==) NV(0): Write-combining range (0x9c009000,0x1000) was already clear
(==) NV(0): Write-combining range (0x9c000000,0x9000) was already clear
(==) NV(0): Write-combining range (0x9c800000,0x10000) was already clear
(==) NV(0): Write-combining range (0x9c601000,0x3000) was already clear
(==) NV(0): Write-combining range (0x9c681000,0x3000) was already clear
(==) NV(0): Write-combining range (0x9c0c0000,0x1000) was already clear
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(==) NV(0): Write-combining range (0xa0000,0x10000) was already clear
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): DDC Monitor info: 0x889fc00
(II) NV(0): Manufacturer: GWY Model: 42d Serial#: 6666666
(II) NV(0): Year: 1998 Week: 11
(II) NV(0): EDID Version: 1.1
(II) NV(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max H-Image Size [cm]: horiz.: 33 vert.: 24
(II) NV(0): Gamma: 2.50
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
(II) NV(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED] (interlaced)
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): [EMAIL PROTECTED]
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) NV(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) NV(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 25.2 MHz Image Size: 312 x 234 mm
(II) NV(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) NV(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 25.2 MHz Image Size: 312 x 234 mm
(II) NV(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) NV(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 25.2 MHz Image Size: 312 x 234 mm
(II) NV(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) NV(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 25.2 MHz Image Size: 312 x 234 mm
(II) NV(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) NV(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525 v_border: 0
(II) NV(0): end of DDC Monitor info
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
X connection to :0.0 broken (explicit kill or server shutdown).
$ cat XF86Config
# NVidia Velocity 128 /etc/X11/XF86Config
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "ServerFlags"
# Option "DontZap" # Uncomment to disable ctrl-alt-bks
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psm0"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
# Gateway 2000 Vitron 700-069
Identifier "Monitor0"
HorizSync 31.5 - 70
VertRefresh 50-120
# VendorName "GWY"
# ModelName "42d"
# Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
Identifier "Card0"
Driver "nv"
#Driver "vga"
VendorName "NVidia/SGS-Thomson"
BoardName "Riva128"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubSection
EndSection
--
Best regards,
Darren mailto:[EMAIL PROTECTED]
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
