|
I did run XFree86 -configure to initialize it and then
ran the test.
I can't run startx but I can get a GUI with xdm
-X
Thanks for the help.
Kathleen
>>> [EMAIL PROTECTED] 08/07/2003
1:33:28 PM >>>
possible answer down below check in your error log
i think you'll see what Im talking about.
----- Original Message -----
Sent: Thursday, August 07, 2003
3:07 PM
Subject: [XFree86] trouble with
XFree
I have a problem with my RedHat 9.0 configuration of my
Matrox G2+ video card.
When I run
XFree86 -xf86config XF86Config.new, I get a mouse cursor as
an X, that can be moved across the screen, but no other video.
To get out of this, I hit the CRTL-ALT-BACKSPACE
keys.
In addition to the error message below, I get:
(EE)
MGA(0): [drm] Direct redering only supported with G200/G400/G550/
AGP
Thanks for all your help,
Kathleen Ayala
XFree86 Version 4.3.0 (Red Hat Linux release:
4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision
0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host:
porky.devel.redhat.com
Before reporting problems, check
http://www.XFree86.Org/ to make sure
that you have the latest version.
Module Loader present
OS Kernel: Linux
version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version
3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command
line, (!!) notice, (II)
informational,
(WW)
warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file:
"/var/log/XFree86.0.log", Time: Wed Aug 6 09:16:27 2003
(EE) Unable
to locate/open config file
(EE) Error from
xf86HandleConfigFile()
^^^^^^^ there is your problem......
no config file. try just running /usr/X11/bin/XF86Config directly to create a
config file then start X with either 'X' or 'startx' I have a millinum
II card from matrox and it works fine. and dont worry about the Direct
rendering error thats just telling you that X cant directly send 3-d rendering
commands to the card, it would have to use a software driver instead of a the
hardware/direct drivers
Fatal server error:
no screens found
---
Outgoing mail is certified Virus Free.
Checked
by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.507 /
Virus Database: 304 - Release Date:
8/4/03
|
