Hey Core pointer device refers to your mouse. I never worked with freebsd but a on most other *nix systems the mouse device is /dev/psaux or a file linked to that mostly /dev/mouse. Check your XF86Config file if the mouse setting are set to the correct device.
Regards Geiregat Jonas On Wed, 2003-08-20 at 20:49, wACk0 wrote: > I'm trying to configure my X system but I've had the following > problems. > On starting the server I have the a fatal no screen found error even > if I've already cfg XF86Config file. > XFree86_version 4.3.0 > ########################################################################## > ## HERE IS THE LOG .0.LOG > ## > ########################################################################## > XFree86 Version 4.3.0 > Release Date: 27 February 2003 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: FreeBSD 4.4-RELEASE-p1 i386 [ELF] > Build Date: 27 February 2003 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Wed Aug 20 14:56:58 > 2003 > (==) Using config file: "/etc/X11/XF86Config" > (WW) No Layout section. Using the first Screen section. > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (EE) Unable to find a core pointer device > (EE) Unable to determine the screen layout > (EE) Error from xf86HandleConfigFile() > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > > ################################################################################ > ## HERE IS THE > .8.LOG ## > ################################################################################ > XFree86 Version 4.3.0 > Release Date: 27 February 2003 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: FreeBSD 4.4-RELEASE-p1 i386 [ELF] > Build Date: 27 February 2003 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.8.log", Time: Mon Aug 18 00:07:22 > 2003 > (++) Using config file: "/root/XF86Config.new" > (==) ServerLayout "XFree86 Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (**) ModulePath set to "/usr/X11R6/lib/modules" > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.6 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on freebsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) PCI: Probing config type using method 1 > (II) PCI: Standard check for type 1 failed. > (II) PCI: stages = 0x00, oldVal1 = 0xffffffff, > mode1Res1 = 0x00000000, mode1Res2 = 0x00000000 > (II) PCI: No PCI bus found or probed for > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension GLX > (II) LoadModule: "dri" > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading sub module "drm" > (II) LoadModule: "drm" > (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a > (II) Module drm: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension RECORD > (II) LoadModule: "xtrap" > (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a > (II) Module xtrap: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DEC-XTRAP > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "chips" > (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o > (II) Module chips: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, > ct65525, > ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, > ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 > (II) Primary Device is: ISA > (--) Chipset ct65545 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] 0 0 0x000b8000 - 0x000bffff (0x8000) MX[B] > [1] 0 0 0x000b0000 - 0x000b7fff (0x8000) MX[B] > [2] 0 0 0x000a0000 - 0x000affff (0x10000) MX[B] > [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [8] 0 0 0x000003c0 - 0x000003df (0x20) IX[B] > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IX[B] > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > [0] 0 0 0x000b8000 - 0x000bffff (0x8000) MX[B] > [1] 0 0 0x000b0000 - 0x000b7fff (0x8000) MX[B] > [2] 0 0 0x000a0000 - 0x000affff (0x10000) MX[B] > [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [8] 0 0 0x000003c0 - 0x000003df (0x20) IX[B] > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IX[B] > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) CHIPS(0): initializing int10 > (II) CHIPS(0): Primary V_BIOS segment is: 0xe000 > (II) CHIPS(0): VESA BIOS detected > (II) CHIPS(0): VESA VBE Version 1.2 > (II) CHIPS(0): VESA VBE Total Mem: 960 kB > (II) CHIPS(0): VESA VBE OEM: CHIPS 65535/540/545 Flat Panel VGA > (==) CHIPS(0): Depth 8, (==) framebuffer bpp 8 > (II) CHIPS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (==) CHIPS(0): Default visual is PseudoColor > (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0) > (==) CHIPS(0): Using HW cursor > (--) CHIPS(0): VideoRAM: 1024 kByte > (**) CHIPS(0): Enabling linear addressing > (--) CHIPS(0): base address is set at 0x3F00000. > (--) CHIPS(0): TFT probed > (--) CHIPS(0): LCD/CRT > (--) CHIPS(0): Display Size: x=640; y=480 > (--) CHIPS(0): VL Bus > (--) CHIPS(0): Internal DAC disabled > (--) CHIPS(0): Synchronous reset ignored. > (--) CHIPS(0): Using programmable clocks > (==) CHIPS(0): Min pixel clock is 11.000 MHz > (--) CHIPS(0): Max pixel clock is 68.000 MHz > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (WW) CHIPS(0): Monitor0: Using default hsync range of 28.00-33.00kHz > (WW) CHIPS(0): Monitor0: using default vrefresh range of 43.00-72.00Hz > (II) CHIPS(0): Clock range: 11.00 to 68.00 MHz > (II) CHIPS(0): Not using default mode "640x350" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x175" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "640x400" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x200" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "720x400" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "360x200" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1152x864" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "576x432" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "832x624" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "416x312" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1152x768" (exceeds panel > dimensions) > (II) CHIPS(0): Not using default mode "576x384" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1600x1024" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "800x512" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (--) CHIPS(0): Virtual size is 640x480 (pitch 640) > (**) CHIPS(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) CHIPS(0): Modeline "640x480" 25.20 640 656 752 800 480 490 > 492 525 -hsync -vsync > (==) CHIPS(0): DPI set to (75, 75) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.2 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.3.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0x03f00000 - 0x04700000 (0x800001) MX[B] > [1] 0 0 0x000b8000 - 0x000bffff (0x8000) MX[B](OprD) > [2] 0 0 0x000b0000 - 0x000b7fff (0x8000) MX[B](OprD) > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MX[B](OprD) > [4] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [5] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [6] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [7] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [8] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [9] 0 0 0x000083d0 - 0x000083fc IX[S] > [10] 0 0 0x000003c0 - 0x000003df (0x20) IX[B] > [11] 0 0 0x000003b0 - 0x000003bb (0xc) IX[B] > [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (--) CHIPS(0): 741376 bytes off-screen memory available > (II) CHIPS(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > 8x8 color pattern filled rectangles > CPU to Screen color expansion > Screen to Screen color expansion > Solid Horizontal and Vertical Lines > Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 23 128x128 slots > 5 256x256 slots > 18 8x8 color pattern slots > 32 8x8 color expansion slots > (==) CHIPS(0): Backing store disabled > (==) RandR enabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (**) Option "Protocol" "auto" > (**) Mouse0: Protocol: "auto" > (**) Option "CorePointer" > (**) Mouse0: Core Pointer > (**) Option "Device" "/dev/sysmouse" > (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 > (==) Mouse0: Buttons: 3 > (II) Keyboard "Keyboard0" handled by legacy driver > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) Mouse0: SetupAuto: protocol is SysMouse > ######################################################################################## > > I'm a newbie to X11 although I understand a little bit about unix. > I'm running FreeBSD-4.8 on a dell-latitude LX_4100 portible conputer > which has the following specifics: > > VIDEO TYPE : hardware accelerated, 32bit local-bus > CONTROLER: C&T 65545 with 1mb memory > DISPLAY: TFT active matrix color max resolution 640x480; 65,536 > colors, char display 80 columbsX 25 lines 60mhz (typical) > > Any help to how I can configure X11 on my system will be appreciated > or any tips or paths to understand this problem. > To all the people of XFree86, thank you WacK0 > ............................................................................................................................................................ > > _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
