Try:
InputDevice "<device>" "SendCoreEvents" instead of InputDevice
"<device>" "CorePointer"
I got my laptop set up with one CorePointer and one SendCoreEvents, if
i inplugg my SendCoreEvents device, X starts just fine :)
Svein Erik
>>> [EMAIL PROTECTED] 17/09 2:22 >>>
I have industrial robotic application that I need to run touch screen
OR/AND a mouse.
Machines will have mouse or touch screen or both or no pointer.
X works fine as long as mouse and touch screen is plugged in.
If only touch screen is plugged in X locks up the screen.
I have googled for a while now with not usable results.
Thanks
Andy R.
My XF86Config-4
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "touchscreen1" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
# FontPath "unix/:7100"
EndSection
# Module loading section
Section "Module"
Load "dbe" # Double-buffering
Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface
Load "extmod" # Misc. required extensions
Load "v4l" # Video4Linux
# Load "pex5" # PHIGS for X 3D environment
(obsolete)
# Load "record" # X event recorder
# Load "xie" # X Image Extension (obsolete)
# You only need the following two modules if you do not use
xfs.
# Load "freetype" # TrueType font handler
# Load "type1" # Adobe Type 1 font handler
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
EndSection
section "InputDevice"
Identifier "touchscreen1"
Driver "elographics"
Option "Device" "/dev/ttyS0"
Option "AlwaysCore"
Option "screenno" "0"
Option "MinimumXPosition" "3718"
Option "MaximumXPosition" "400"
Option "MinimumYPosition" "3512"
Option "MaximumYPosition" "534"
Option "UntouchDelay" "10"
Option "ReportDelay" "10"
EndSection
Section "InputDevice"
Identifier "Mouse0"
# Modified by mouseconfig
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Princeton EO40"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 48.0
VertRefresh 50.0-120.0
# Option "dpms" # this blanks out the screen
EndSection
Section "Device"
Identifier "ATI Mach64 VT (264VT)"
Driver "ati"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Mach64 VT (264VT)"
Monitor "Princeton EO40"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubSection
Subsection "Display"
Depth 8
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
_______________________________________________
Redhat-install-list mailing list
[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-install-list
To Unsubscribe Go To ABOVE URL or send a message to:
[EMAIL PROTECTED]
Subject: unsubscribe
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
