Dear Sir or Madam:
Sorry to trouble you.
I have installed the redhat and suse in my desktop, but there is
a display problem about my Monitor:
I can only enter into the X by 640x480 with 16 depth. If I config
it into 1024x768(with 16 depth) in XF86config and then type "startx",
the error message appear saying that there are no mode about it.
However, I can use 1024x768 with 24 depth in windows XP. Is there
anyone who can tell me the reason?
My video card is Intel 845 and the monitor is Dell E151FPb which
is a Flat Panel monitor. The resoluation of it is in below:
Horizontal scan range
30 kHz to 61 kHz (automatic)
Vertical scan range
56 Hz to 76 Hz (automatic)
Optimal preset resolution
1024 x 768 at 60 Hz
Highest preset resolution
1024 x 768 at 75 Hz
And you can also find its Specifications in
http://docs.us.dell.com/docs/monitors/E151FPB/English/specs.htm
My XF86config file is in below, please help me check it.
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "speedo"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
Load "dri"
EndSection
Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "MapName" "Standard Keyboard [ pc104 ]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "5"
Option "Device" "/dev/mouse"
Option "Name" "Autodetection"
Option "Protocol" "imps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
HorizSync 30-61
Identifier "Monitor[0]"
ModelName "1024X LAPTOP DISPLAY PANEL"
VendorName "DELL"
VertRefresh 56-76
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "i845"
BusID "0:2:0"
Driver "i810"
Identifier "Device[0]"
Screen 0
Option "Rotate" "off"
VendorName "Intel"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Thank you very much and I am looking forward to your reply.
Sincerely yours,
Yang
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
