Being fixed frequency does indeed change things.  You have
to have a suitable modeline or else the monitor won't sync.
That would require you knowing the exact syncing requirements
(horizontal sync rate, especially).  I assume you have the
owner's manual and it lists such frequencies?


                Mark.


On Sun, 26 Oct 2003, Peter Fabulous wrote:

> Mark, thanks for trying. I have the monitor switched to BNC and have two
> separate sets of cables. On researching the problem with Nokia, they said
> that they do not support Linux, but thought the problem could be related to
> the Multigraph being a Fixed Frequency Monitor. My understanding of RH8 is
> limited, is this a problem?
> 
> ----- Original Message -----
> From: "Mark Vojkovich" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Monday, October 20, 2003 12:00
> Subject: Re: Re: [XFree86] BNC Connections
> 
> 
> >    Your monitor probably has a switch somewhere (maybe in the onscreen
> > controls) that switches between D-Sub and BNC.  Other than the cable
> > being broken or the monitor not using the BNC inputs, there's really
> > not much that could go wrong.
> >
> >
> > Mark.
> >
> > On Mon, 20 Oct 2003 [EMAIL PROTECTED] wrote:
> >
> > > Sorry, and thank you Mark, yes I have a SVGA - BNC cable with 5 BNC
> connectors at the end of it. Got any ideas?
> > > > From: Mark Vojkovich <[EMAIL PROTECTED]>
> > > > Date: 2003/10/19 Sun PM 03:08:00 EDT
> > > > To: [EMAIL PROTECTED]
> > > > CC: [EMAIL PROTECTED]
> > > > Subject: Re: [XFree86] BNC Connections
> > > >
> > > >
> > > >
> > > > On Sun, 19 Oct 2003 [EMAIL PROTECTED] wrote:
> > > >
> > > > > I have a Nokia MultiGraph 445 Xpro monitor and a Diamond Stealth
> 2000 pro video card. I can not ge the card and monitor to work using the BNC
> connectors. Works fine with the D-Sub connectors. Any ideas? I would go to
> Diamond, but since they got bought no one seems to be supplying support for
> their video cards.
> > > > >
> > > >
> > > >    Just to be clear... You have *FIVE* BNC connectors (R,G,B,H,V) ?
> > > >
> > > >
> > > > Mark.
> > > >
> > > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > XFree86 mailing list
> > [EMAIL PROTECTED]
> > http://XFree86.Org/mailman/listinfo/xfree86
> >
> 
> 
> _______________________________________________
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
> 

_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to