The "nv" driver is unlikely to get the DVI working unless
the GeForce card was the primary, that is, the one that the
text mode came up on. The Option CrtcNumber is not valid
for the GeForce2 GTS. It only applies to dual-head cards.
If you can switch which is the text mode from your motherboard
bios, the GeForce may work (I assume it's not the primary which
is why it's not working).
Mark.
On Tue, 28 Oct 2003, Chris Hubick wrote:
> Hi :)
>
> I currently have 2 DVI LCD's, and run Xinerama on them using two cards,
> a Matrox G450 PCI over DVI, and a NVidia GeForce2-GTS AGP over VGA.
> After much effort, I can't get the GF2's DVI working in this combination
> (under 4.3, even with "FlatPanel" "true" and "CrtcNumber" "1", etc).
>
> Thus, I am looking to replace the GF2 or both cards, becuase I need DVI
> support for the second screen.
>
> Requirements:
> 1) working DVI connector(s)
> 2) Free/Open Source XFree86 drivers (most robust support wanted)
> 3) 2D workstation use only, no 3D or gaming
> 4) 1600x1200 support is a big bonus
>
> So, which cards currently in retail meet the above 4 requirements and
> are:
> a) Single DVI, AGP bus? (Radeon 9[2|6]00[pro|se])?
> b) Single DVI, PCI bus?
> c) Dual DVI, AGP bus?
>
> Much Thanks!
>
> --
> Chris Hubick
> mailto:[EMAIL PROTECTED]
> http://www.hubick.com/
>
> _______________________________________________
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
