Elsa's GLoria line spans many generations and different chip
vendors. Which driver to use depends on which specific model you
have. The VGA driver, which you are currently using, is for plain
VGA mode (depth 4 @ 640x480).
The whole server output is at /var/log/XFree86.0.log
Mark.
On Fri, 5 Dec 2003, Peter Soper wrote:
> Hi,
> I have an older, (late 90's vintage Pentium Pro) computer that I am hoping to
> convert to run MSC linux, for which I have a set of V2001 CD's.
>
> I am booting off their distribution CD with a essentially blank, NTFS formatted
> secondary 18G Hard disk where I wanted to install the OS and apps.
>
> In attepting the installation I get these last two "server" errors-
>
> (EE) VGA(0): Driver Can't support depth 24
>
> and
>
> (EE) Screen(s) found, but none have a usable configuration.
>
> followed by;
>
> Fatal Server Error:
> no screens found.
>
>
> This machine has an Elsa Gloria SVGA graphics card but I don't know how linux is
> supposed to recognize that? Is it something I should go and manually edit on the
> pre-boot system config screen?
>
> I know it tells me I should be reporting the whole server output instead of just the
> end of the message, but I don't know linux command line stuff well enough to accress
> the file you point me to.
>
> The last error message I see is this;
>
> XIO: fatal error 104 (Connection reset by peer) on X server ":0.0" after 0 requests
> (0 known processed) with 0 events remaining
>
> then I get a "Welcome to MSC.Linux 2001" header followed by a direction to login as
> root, where I find myself staring at a blinking dollar sign prompt, just like my old
> days on the VAX-80, but I can't seem to tell it to do anything beyond that.
>
> by the way- the kernal number is 2.4.6-1.msc-smp
>
> Any suggestions on where to look or what to try to fix this up?
>
> Thanks
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
