Hi Mark, unfortunatly, it still doesn't work. :|
I'm using a self-compiled nvidia driver "nvidia" from www.nvidia.com. I attached my XF86Config-4 and my XFree86.0.log. Michael ----- Original Message ----- From: "Mark Vojkovich" <[EMAIL PROTECTED]> To: "Michael Kirchhof" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Friday, December 12, 2003 9:24 PM Subject: Re: [XFree86] Apple Cinema Display 23" / Nvidia Quadro / Linux Debian Xfree 4.3 > Yes, it should work. I assume you are using the "nv" driver that > came with XFree86 4.3. A modeline like the following should work. > > Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 > > XFree86 4.3 has some autodetection problems (the 4.4 pre-releases > are better in this respect), so you often have to do some XF86Config > file magic with flat panels. Try adding to the Section "Device": > > Option "FlatPanel" > > If that doesn't work, then also try: > > Option "CrtcNumber" "1" > > If you can't get it to work send me your /var/log/XFree86.0.log file. > > > Mark. > > On Fri, 12 Dec 2003, Michael Kirchhof wrote: > > > Hi, > > > > is it possible to get this combination to work? I googled around, but > > couldn't find a working configuration (modlines, ...). The display seems to > > be recognized, but nothing is displayed. > > > > Please help! :) > > > > > > _______________________________________________ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > > > _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
