Sir,
I 've recently installed linux kernel 2.6.0 and all things X related seem to be
functioning fine, except for switching terminals and shutting down...when i try to
kill x, or switch a terminal(ctrl-alt-F1-6) or restarting, all i get is a blank
screen. i know my keyboard is working cause ctrl-alt F7 switched back to the active X
terminal. i had no problems with kernel 2.4.22
anyway here are the required log files:
The log file
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22 i686 [ELF]
Build Date: 16 September 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jan 11 15:57:22 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "VESA Framebuffer"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80010044, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1043,8064 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:05:0: chip 13f6,0111 card 1043,80e2 rev 10 class 04,01,00 hdr 00
(II) PCI: 00:0f:0: chip 3388,0021 card 0000,0000 rev 13 class 06,04,00 hdr 01
(II) PCI: 00:11:0: chip 1106,3147 card 1043,8052 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1043,8052 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0250 card 1043,800b rev a3 class 03,00,00 hdr 00
(II) PCI: 02:08:0: chip 1033,0035 card 9004,0235 rev 41 class 0c,03,10 hdr 80
(II) PCI: 02:08:1: chip 1033,0035 card 9004,0235 rev 41 class 0c,03,10 hdr 00
(II) PCI: 02:08:2: chip 1033,00e0 card 9004,02e0 rev 02 class 0c,03,20 hdr 00
(II) PCI: 02:0b:0: chip 104c,8020 card 104c,8010 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe6000000 - 0xe76fffff (0x1700000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe7700000 - 0xefffffff (0x8900000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:15:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe3800000 - 0xe5ffffff (0x2800000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4600] rev 163, Mem @
0xe6000000/24, 0xe8000000/27, 0xe7800000/19, BIOS @ 0xe77e0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B]
[1] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B]
[2] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
[3] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[4] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[5] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[6] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B)
[7] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
[8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[9] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[11] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[12] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B]
[1] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B]
[2] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
[3] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[4] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[5] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[6] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B)
[7] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
[8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[9] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[11] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[12] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B]
[6] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B]
[7] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
[8] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[9] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[10] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[11] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B)
[12] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[19] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.5328
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-5328 Wed Dec 17 13:56:09 PST 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B]
[6] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B]
[7] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
[8] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[9] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[10] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[11] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B)
[12] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[19] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B]
[6] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B]
[7] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
[8] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[9] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[10] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[11] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B)
[12] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[21] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[22] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xE8000000
(--) NVIDIA(0): MMIO registers at 0xE6000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4600
(--) NVIDIA(0): VideoBIOS: 04.25.00.19.00
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-1
(--) NVIDIA(0): Detected TV Encoder: Brooktree 871
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) NVIDIA(0): My Monitor: Using hsync range of 30.00-130.00 kHz
(II) NVIDIA(0): My Monitor: Using vrefresh range of 48.00-170.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1800x1440/70Hz" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1600x1200/85Hz" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-1:
(**) NVIDIA(0): Mode "1280x1024/100Hz": 181.8 MHz, 107.2 kHz, 100.0 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(**) NVIDIA(0): Mode "1280x1024/85Hz": 157.5 MHz, 91.1 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 170.2 MHz, 120.2 kHz, 75.0 Hz
(**) NVIDIA(0): (D)
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "960x720": 170.7 MHz, 128.5 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "960x720": 148.5 MHz, 112.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "928x696": 144.0 MHz, 112.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "896x672": 130.5 MHz, 106.3 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(**) NVIDIA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): Display dimensions: (400, 300) mm
(--) NVIDIA(0): DPI set to (81, 86)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe7800000 - 0xe787ffff (0x80000) MX[B]
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[2] 0 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B]
[9] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B]
[10] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
[11] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[12] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[13] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[14] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B)
[15] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
[16] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[17] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[24] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[25] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[26] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): AGP 4X successfully initialized
(II) NVIDIA(0): Setting mode "1280x1024/100Hz"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(EE) NVIDIA(0): Failed to load GLX
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Buttons" "7"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "6 7"
(**) Mouse1: ZAxisMapping: buttons 6 and 7
(**) Mouse1: Buttons: 7
(**) Option "SampleRate" "1000"
(**) Mouse1: SampleRate: 1000
(**) Option "Resolution" "600"
(**) Mouse1: Resolution: 600
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) NVIDIA(0): Setting mode "1280x1024/100Hz"
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) NVIDIA(0): Setting mode "1280x1024/100Hz"
(II) Mouse1: ps2EnableDataReporting: succeeded
the XF86Config file:(only the relevant stuff)
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
Load "speedo"
# This loads the GLX module
Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "DontZoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
# Set the basic blanking screen saver timeout.
# Option "blank time" "10" # 10 minutes
# Set the DPMS timeouts. These are set here because they are global
# rather than screen-specific. These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.
# Option "standby time" "20"
# Option "suspend time" "30"
# Option "off time" "60"
# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.
# Option "EstimateSizesAggresively" "0"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
# Option "AutoRepeat" "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option "XkbLayout" "de"
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
#
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "Buttons" "7"
Option "ZAxisMapping" "6 7"
Option "Emulate3Buttons" "no"
Option "Resolution" "600"
Option "Samplerate" "1000"
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# The mouse device. The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.
# Option "Device" "/dev/psaux"
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Some examples of extended input devices
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-130
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 48-170
vendorname "Sony"
modelname "CPD G520"
ModeLine "1280x1024/85Hz" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
ModeLine "1280x1024/100Hz" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync
-VSync
ModeLine "1800x1440/70Hz" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1600x1200/85Hz" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "VESA Framebuffer"
Driver "nvidia"
#VideoRam 4096
# Insert Clocks lines here if appropriate
vendorname "Generic"
boardname "nv"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"
# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
# DefaultDepth 8
# DefaultDepth 16
DefaultDepth 24
# DefaultDepth 32
# "1024x768" is also a conservative usable default resolution. If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
Subsection "Display"
Depth 8
Modes "1280x1024/100Hz" "800x600" "640x480"
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024/100Hz" "800x600" "640x480"
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024/100Hz" "800x600" "640x480"
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024/100Hz" "800x600" "640x480"
Virtual 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse"
Option "Protocol" ""
Option "Device" "/dev/mouse"
Driver "mouse"
Option "ZAxisMapping" "4 5"
EndSection
-----------------------------------------------
other details: im using Slackware 9.0 and have a Geforce 4 ti 4600. i have the same
problem with framebuffer on or off..
Thanks for all the help in advance...
--
_______________________________________________
http://www.ign.com
Upgrade to Premium IGN Email
- 15MB of space
- No ads!
- Pop3 Downloads
Powered by Outblaze
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
