hi,
the symptoms are:
-when Im using pure xfree 4.3 without any option my desktop has a yellow
line from up to down in the 1/4 of length of screen.
Mouse cursor has sticked square, which has about 35 mm of length.
When Im moving the mouse cursor on my desktop is appearing a snow similar
to the one which can be obtained when somebody is trying to get some TV
canal by moving the beam-aerial.
When a window is moving on my desktop stays frames of the previous window
positions, so after several movings the desktop is unreadable.
-when Im using the SWCursor option my mouse cursor is drawed correctly
without a square, but during move there is a square smudge after the
cursor.
the problem with smudge is solved when I turn on the ShadowFB option.
With ShadowFB option turned on the smudge and frames didn't appear, but
the "snow" distortion is still there.
The rest of options like early_ras_precharge, late_ras_precharge,
"slow_edodram", "set_mclk" didn't help also.
on my Virge chipset are such overprints:
Q5C4BB
86C385
9721 B4H54
TAIWAN ;-)
At the end of my email is my XFree log.
Thank You for any help.
PS:
I know that the Compaq's Virges are problematic, but maybe is there a
chance to modify the xfree 4.3 driver somehow?
if You want any other info, please tell me that.
if the info that I wrote isnt enough I will try to make a picture of
the damned screen and I will post a letter here once again.
> Would you describe how the desktop is messed up? That would help us
> understand what you are seeing.
>
> Does the "noaccel" option in the driver section make the problem go
> away? Can you post a log file (/var/log/XFree86.0.log) somewhere, for a
> run which you describe the desktop behavior for?
>
> The S3V server was one of the earlier virge drivers, with the s3virge
> driver in 4.x being a fairly large rewrite of that and the virge support
> in the SVGA driver from 3.3.6. Very little feedback has come in for
> ViRGE GX, so it sounds like we still have some trouble there.
------
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22 i686 [ELF]
Build Date: 16 September 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Feb 9 13:07:20 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "pl"
(**) XKB: layout: "pl"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "DisableModInDev"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,1595 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:0d:0: chip 5333,8a01 card 0e11,b032 rev 01 class 03,00,00 hdr 00
(II) PCI: 00:10:0: chip 0e11,b011 card 0000,0000 rev 10 class 02,80,00 hdr 00
(II) PCI: 00:14:0: chip 1106,0586 card 0000,0000 rev 31 class 06,01,00 hdr 80
(II) PCI: 00:14:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:14:2: chip 1106,3038 card 0925,1234 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:14:3: chip 1106,3040 card 0000,0000 rev 01 class 00,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:13:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0x40000000/26
(--) PCI: (0:20:3) VIA Technologies, Inc. VT82C586B ACPI rev 1
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x44000000 - 0x4400000f (0x10) MX[B]
[1] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[2] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
[3] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[4] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x44000000 - 0x4400000f (0x10) MX[B]
[1] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[2] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
[3] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[4] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x44000000 - 0x4400000f (0x10) MX[B]
[6] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
[10] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[11] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "xtt"
(II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
(II) Module xtt: vendor="X-TrueType Server Project"
compiled for 4.3.0, module version = 1.3.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.8.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 00:0d:0
(--) Assigning device section with no busID to primary device
(--) Chipset virge dx found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x44000000 - 0x4400000f (0x10) MX[B]
[6] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
[10] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[11] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x44000000 - 0x4400000f (0x10) MX[B]
[6] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
[13] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[14] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
[15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16
(==) S3VIRGE(0): RGB weight 565
(==) S3VIRGE(0): Default visual is TrueColor
(**) S3VIRGE(0): Option "SWCursor"
(**) S3VIRGE(0): Option "ShadowFB"
(**) S3VIRGE(0): Using SW Cursor
(**) S3VIRGE(0): ShadowFB enabled.
(WW) S3VIRGE(0): HW acceleration not supported with "shadowFB".
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 2048 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B
(--) S3VIRGE(0): Chipset: "virge dx"
(==) S3VIRGE(0): XVideo supported.
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level 2
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec.
(II) S3VIRGE(0): VESA VBE DDC read successfully
(II) S3VIRGE(0): Manufacturer: NEC Model: 61ad Serial#: 16843009
(II) S3VIRGE(0): Year: 2000 Week: 20
(II) S3VIRGE(0): EDID Version: 1.2
(II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) S3VIRGE(0): Sync: Separate Composite
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 33 vert.: 24
(II) S3VIRGE(0): Gamma: 2.20
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): First detailed timing is preferred mode
(II) S3VIRGE(0): GTF timings supported
(II) S3VIRGE(0): redX: 0.625 redY: 0.338 greenX: 0.281 greenY: 0.602
(II) S3VIRGE(0): blueX: 0.149 blueY: 0.073 whiteX: 0.283 whiteY: 0.297
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED] (interlaced)
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported Future Video Modes:
(II) S3VIRGE(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) S3VIRGE(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) S3VIRGE(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) S3VIRGE(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) S3VIRGE(0): #4: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) S3VIRGE(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) S3VIRGE(0): #6: hsize: 1600 vsize 1200 refresh: 70 vid: 19113
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 157.5 MHz Image Size: 315 x 236 mm
(II) S3VIRGE(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728
h_border: 0
(II) S3VIRGE(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072
v_border: 0
(II) S3VIRGE(0): Ranges: V min: 55 V max: 160 Hz, H min: 31 H max: 92 kHz, PixClock
max 200 MHz
(II) S3VIRGE(0): Monitor name: NEC FE750
(II) S3VIRGE(0): Serial No: 0545327FB
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 2048k
(--) S3VIRGE(0): Detected current MCLK value of 74.659 MHz
(II) S3VIRGE(0): My Monitor: Using hsync range of 31.00-92.00 kHz
(II) S3VIRGE(0): My Monitor: Using vrefresh range of 55.00-160.00 Hz
(II) S3VIRGE(0): Clock range: 10.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1152x864" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "1152x768" (width too large for virtual size)
(--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
+hsync +vsync
(**) S3VIRGE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync
+vsync
(**) S3VIRGE(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) S3VIRGE(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505
doublescan +hsync +vsync
(**) S3VIRGE(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync
+vsync
(**) S3VIRGE(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222
doublescan -hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) S3VIRGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800
+hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806
-hsync -vsync
(**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806
-hsync -vsync
(**) S3VIRGE(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) S3VIRGE(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817
interlace +hsync +vsync
(**) S3VIRGE(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "960x720" 117.00 960 1024 1128 1300 720 720 722 750
doublescan -hsync +vsync
(**) S3VIRGE(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(II) S3VIRGE(0): Modeline "928x696" 109.15 928 976 1088 1264 696 696 698 719
doublescan -hsync +vsync
(**) S3VIRGE(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697
doublescan -hsync +vsync
(**) S3VIRGE(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) S3VIRGE(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync
-vsync
(**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync
+vsync
(**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync
+vsync
(**) S3VIRGE(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(II) S3VIRGE(0): Modeline "800x600" 94.50 800 832 928 1080 600 600 602 625
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) S3VIRGE(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync
+vsync
(**) S3VIRGE(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync
+vsync
(**) S3VIRGE(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) S3VIRGE(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x512" 78.75 640 672 752 864 512 512 514 536
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync
-vsync
(**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync
-vsync
(**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync
-vsync
(**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync
-vsync
(**) S3VIRGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync
+vsync
(**) S3VIRGE(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync
-vsync
(**) S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403
doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403
doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409
interlace doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333
doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312
doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254
doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250
doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260
doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262
doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223
doublescan -hsync +vsync
(**) S3VIRGE(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222
doublescan +hsync -vsync
(--) S3VIRGE(0): Display dimensions: (330, 240) mm
(--) S3VIRGE(0): DPI set to (78, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x40000000 - 0x43ffffff (0x4000000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0x44000000 - 0x4400000f (0x10) MX[B]
[7] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00001000 - 0x0000101f (0x20) IX[B]
[14] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[15] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
[16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) S3VIRGE(0): Using FB
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Buttons" "3"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 7
(**) Option "Resolution" "256"
(**) Mouse1: Resolution: 256
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
