Hi ya all,
I have a problem, with my X. ( nooooooooo ;-) )
I run Debian sid, kernel 2.6.2, xserver-xfree8 4.3.0-2,gcc 3.3.2-3, so I upgraded my
system and at
start ( the next day ), my X goes only in 800x600 instead 1024x748, I use vesa driver
because my laptop has
Prosavage 8 on VIA KN400 chipset, and drivers does not function well.
That's it, the /var/log/XFree86.0.log errors seems only to be:
- Open APM failed (/dev/apm_bios) (No such file or directory)
- VESA(0): VESA VBE DDC read failed
- VESA(0): VBESetVBEMode failed...Tried again without customized values
- VESA(0): Failed to set up write-combining range (0xf0000000,0x4000000)
- (II) VESA(0): Total Memory: 1024 64KB banks (65536kB)
(II) VESA(0): monitor1: Using hsync range of 31.50-48.50 kHz
(II) VESA(0): monitor1: Using vrefresh range of 70.00-130.00 Hz
(II) VESA(0): Not using mode "1024x768" (no mode of this name)
(--) VESA(0): Virtual size is 800x600 (pitch 800)
(**) VESA(0): Built-in mode "800x600"
(**) VESA(0): Built-in mode "640x480"
(++) VESA(0): DPI set to (100, 100)
(II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (114)
(II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (111)
(**) VESA(0): Using "Shadow Framebuffer"
but I didn't touched in anyway neither X nor anything concerned.
I just killed X and poweroff'ed.
What's going on?
Help me please I can't stand 800x600 no more, since my video card is not supported (
:-(( why me! )
--
"If a train station is where a train stops. Then what stops at a workstation?"
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
