until you start X the screen is correct?
Yes, the screen is fine until I start X. And if I configure in the little Linux
penguin boot logo, it's in the right place at the top of the screen too. And
it's fine after I start the Metro version of X. It's only when I start
XFree86 that I have a problem. I played with xvidtune a little bit and I
could make the black band smaller and move it up a little bit. But it
runs out of range before the bottom is completely off the top of the
screen. It's a slow process right now, because xvidtune crashes X
when I hit apply or test, so I have to just show the modeline and paste
it into the config file.

I remember a setting in XF86Config where you tell X to use the BIOS setting for the screen resolution. Because the problem you speak of is what I know when one use a false BIOS setting for the display.
I think I remember seeing that option somewhere.  I'll see if I can find it
again and try that.

Thanks:
                             David

> Subject: [XFree86] lcd bottom of screen at top & top at bottom
>
>
> I'm tyring to run XFree86 Version 4.4.0 on a Jumtek MOPSLCD6
> PC-104 (CT69000
> chipset detected) computer with a 640x480 VGA LCD.  The top
> of the screen
> shows what should be on the bottom of the screen, then there
> is a black
> horizontal band about an inch tall, and below that is what
> should be the top
> of the screen.  The same hardware works fine with Metro-X
> Enhanced Server
> Set version 4.3.4-1, but I'd like to use xfree86.  I
> attempted to set up
> XF86config the same as the XMetroconfig that is working, but
> with no luck.
> What can I try to get rid of the vertical wrapping that I'm seeing?
>
> Thanks:
>
>                                   David

_________________________________________________________________
Check out MSN PC Safety & Security to help ensure your PC is protected and safe. http://specials.msn.com/msn/security.asp


_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to