I think that you should use a modeline for the mode [EMAIL PROTECTED] Add
the modelines to your monitor section.

ModeLine "800x600" 78.84 800 840 1040 1120 600 602 614 640 #110Hz

ModeLine "1024x768" 98.97 1024 1072 1312 1408 768 770 782 808 #87Hz --
This one may not work because of the clock rate, but you can try it.

Your list of modes is quite constrained with the vesa driver. None of
the other modes specified in your monitor section will work. The log
file details which modes are acceptable

(II) VESA(0): Supported VESA Video Modes:
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED]
(II) VESA(0): [EMAIL PROTECTED] # I was wrong about the modes they go up
to 1024x768


Your monitors specs
(II) VESA(0): Monitor name: PHILIPS 107S
(II) VESA(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 71
kHz, PixClock max 110 MHz

If you want to generate additional modelines here are some methods for
doing so.
Here is a web based tool to generate the modeline
http://koala.ilog.fr/cgi-bin/nph-colas-modelines

You can also use gtf which ships with XFree86, here is the man page
http://www.xfree.org/current/gtf.1.html


Your card was probed as an Intel chip so, you may be able to use the
Intel driver  i810 instead of the vesa.
(--) PCI:*(0:2:0) Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated
Graphics Device rev 3, Mem @ 0xf0000000/27, 0xffa80000/19

http://www.xfree.org/current/i810.html -- link to a readme for the
driver.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Lourenzo Dias
Sent: Tuesday, May 25, 2004 7:01 AM
To: [EMAIL PROTECTED]
Subject: [XFree86] I Need help on error "No Screens found"

_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to