Hi Orlando,
> Try to set the "virdual screen" in duble size orizontal. In others words, if
> your screen mode is set to 800x600, set the virtual to 1600x600. That has
> worked for me, using 2 nvidia. Later I have buyed a dual card. :) same
> problem, but, changing the virtual has solved the problem. :)
Thanks for the suggestion but it does not seem to help. When I start with this:
Section "ServerLayout"
Identifier "Xine"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Option "Xinerama" "on"
EndSection
Then the second monitor does not even seem to pick up any signal,
while it does perfectly with this:
Section "ServerLayout"
Identifier "Second"
Screen 0 "Screen1" 0 0
EndSection
Any further clues?? :-(
On a side note, I found the source of the inconsistent behavior
mentioned in my original post. Apparently the way it goes wrong
depends on acpi paramenters on the kernel. I have tweaked with
various combinations of pci=noacpi, acpi=off/on but did not get much
further.
Have you guys have a general suggestion for what the acpi settings on
the kernel should be for best results?
thanks,
tamas
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
