Hello.
Is there a possibility to switch a display to an other CRT/TV (device) by
key-combination? I think of a VT
My graficscard (GTS2) has no twinview (only one DAC), but tv-out (s-video)
The device option <"ConnectedMonitor" "TV"> should work with <driver "nvidia">
for the s-video output.
Can I and if possible how can I configure two VTs with that devices? (CRT and
TV)
Otherwise I'll write a script to choose the output on startup, but there isn't
then a possibility to switch.
I'll write your answer to LinuxQuestions.org
I hope you can give me a positive answer.
Many thanks
sebastian
nvidia options:
Option "ConnectedMonitor" "TV"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-B"
What's in XFree86.0.log :
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xE0000000
(--) NVIDIA(0): MMIO registers at 0xEC000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce2 GTS/GeForce2 Pro
(--) NVIDIA(0): VideoBIOS: 02.15.01.14.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 2X
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0, TV-0
(WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
(WW) NVIDIA(0): using first display
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 300 MHz
_______________________________________________
XFree86 mailing list
[email protected]
http://XFree86.Org/mailman/listinfo/xfree86
