I did not get the file you sent (XF86Config-4). well i tried lspci. i am attaching the output i have a personal computer and pentium 4 processor Intel D845WN motherboard
--- gustavo halperin <[EMAIL PROTECTED]> wrote:
> Look, your xorg.conf looks very suspicious. First
> you need say us which
> computer do you have,
> That is a Laptop or what, second I recommend you
> search in the Internet
> (maybe www.google.com/linux)
> for some one with the same Graphic Card like you and
> take her
> XF86Config-4 to you.
> I also don't understand why if you did install X.org
> do you ask your
> question in the XFree86 mailing list.
> Last I send you a file XF86Config-4.vesa, just back
> up your xorg.conf
> and replace it by my config file,
> in ,y config file I use the general driver vesa that
> commonly work for
> all the graphic card but whit out any
> acceleration. After well when we will know what is
> your Graphic Card we
> will can try the specific one for
> you.
> In order to know which Graphic Card do you have try
> run the function
> 'lspci' and recognize there the
> Graphic Card or just send my the output and I will
> try help you.
>
> Good luck
> Gustavo
>
> sowmya menon wrote:
>
> >Hello
> >I dont have the file /etc/XF86Config-4
> >My config file is /etc/X11/xorg.conf
> >I am sending the entire log file and the entire
> >xorg.conf file
> >Thanks
> >Sowmya
> >
> >--- gustavo halperin <[EMAIL PROTECTED]> wrote:
> >
> >
> >
> >>Do you have the file "/etc/XF86Config-4", can you
> >>send it ??
> >>
> >> Gustavo
> >>sowmya menon wrote:
> >>
> >>
> >>
> >>>Hello,
> >>> today i tried installing fedora 4 . when i
> >>>
> >>>
> >>installed
> >>
> >>
> >>>the previous versions it showed error "Unable to
> >>>
> >>>
> >>probe
> >>
> >>
> >>>video settings" while installation. but fedora 4
> >>>
> >>>
> >>didnt
> >>
> >>
> >>>show any errors. it probed the video card -sis
> >>>300/305.
> >>>but after installation still the Gui didnt come
> up.
> >>>
> >>>
> >>i
> >>
> >>
> >>>am sending the log file and config file.
> >>>
> >>>thanks
> >>>Sowmya
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>--- gustavo halperin <[EMAIL PROTECTED]> wrote:
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>Hello
> >>>>
> >>>>Send me your "/etc/XF86Config-4" and the entire
> >>>>"/var/log/XFree86.0.log" and
> >>>>I will try find your problem.
> >>>>
> >>>> Gustavo
> >>>>
> >>>>sowmya menon wrote:
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>Hello,
> >>>>>
> >>>>>I installed Redhat 7.3 and the Gui didnt come
> up.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>the
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>command prompt is there and i can execute
> >>>>>
> >>>>>
> >>commands.
> >>
> >>
> >>>>>but when i give startx, it showed the following
> >>>>>errors.
> >>>>>(==)Log File: '/var/log/XFree86.0.log"
> >>>>>Parse error on line 242
> >>>>>Config file /etc/X11/XF86Config
> >>>>>"Device" is not a valid keyword in this section
>
> >>>>>
> >>>>>(EE) problem parsing config file
> >>>>>(EE) Error from xf86HandleConfig()
> >>>>>
> >>>>>Fatal server error: no screens found
> >>>>>
> >>>>>xIO: Fatal IO error 104 (connection reset by
> >>>>>
> >>>>>
> >>peer)
> >>
> >>
> >>>>>on Xserver ":0.0"
> >>>>>after 0 requests (0 known processed)
> >>>>>with 0 events remaining
> >>>>>
> >>>>>
> >>>>>i tried fedora core 1 and also 3. but i had the
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>same
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>problem. the GUI didnt come up.
> >>>>>
> >>>>>I have Intel Pentium 4 processor and
> motherboard
> >>>>>
> >>>>>
> >>-
> >>
> >>
> >>>>>Intel desktop Board D845WN
> >>>>>
> >>>>>how do i solve the problem?
> >>>>>
> >>>>>Sowmya
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
>
>>>__________________________________________________________
> >>>
> >>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>Yahoo! India Matrimony: Find your partner
> online.
> >>>>>
>
=== message truncated ===> # XF86Config-4 (XFree86 X
Window System server
> configuration file)
> #
> # This file was generated by dexconf, the Debian X
> Configuration tool, using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the
> XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # This file is automatically updated on
> xserver-xfree86 package upgrades *only*
> # if it has not been modified since the last upgrade
> of the xserver-xfree86
> # package.
> #
> # If you have edited this file but would like it to
> be automatically updated
> # again, run the following commands as root:
> #
> # cp /etc/X11/XF86Config-4
> /etc/X11/XF86Config-4.custom
> # md5sum /etc/X11/XF86Config-4
> >/var/lib/xfree86/XF86Config-4.md5sum
> # dpkg-reconfigure xserver-xfree86
>
> Section "Files"
> FontPath "unix/:7100" # local font server
> # if the local font server has problems, we can
> fall back on these
> FontPath "/usr/lib/X11/fonts/misc"
> # FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/encodings"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/util"
> # FontPath "/usr/lib/X11/fonts/CID"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> # Load "tridentfb"
> # Load "cyber2000fb"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "x.org" #free86.ln
> Option "XkbModel" "pc102"
> Option "XkbLayout" "es,il,us"
> Option "XkbOptions" "grp:shift_toggle"
> # Option "XkbVariant" "ar"
> # Option "XKbOptions" ""
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/psaux"
> Option "Protocol" "PS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> Driver "synaptics"
> Identifier "touchpad"
> Option "AlwaysCore"
> # Option "CorePointer"
> Option "Device" "/dev/psaux"
> Option "Protocol" "auto-dev"
> Option "LeftEdge" "1700"
> Option "RightEdge" "5300"
> Option "TopEdge" "1700"
> Option "BottomEdge" "4200"
> Option "FingerLow" "25"
> Option "FingerHigh" "30"
> Option "MaxTapTime" "180"
> Option "MaxTapMove" "220"
> Option "VertScrollDelta" "100"
> Option "MinSpeed" "0.06"
> Option "MaxSpeed" "0.12"
> Option "AccelFactor" "0.0010"
> Option "SHMConfig" "on"
> EndSection
>
> Section "Device"
> Identifier "Generic Video Card"
> Driver "vesa"
> EndSection
>
> Section "Monitor"
> Identifier "Generic Monitor"
> HorizSync 28-50
> VertRefresh 43-75
> Option "DPMS"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Generic Video Card"
> Monitor "Generic Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> # InputDevice "touchpad"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
__________________________________________________________
Yahoo! India Matrimony: Find your partner now. Go to http://yahoo.shaadi.com
lspci_output.doc
Description: 2615593689-lspci_output.doc
