[XFree86] i am not able to run StartX in red hat linux 8.0

Tue, 15 Nov 2005 04:10:17 -0800

hi sir
 
              i have freshly installed the RHL 8 on the desktop and its version is   Red Hat Linux release: 4.2.0-72  and my XFree86  version is  XFree86 Version 4.2.0 . when i first started the  GUI mode ( startx )  the monitor screen got garbled  so i logged into the terminal by typring ctrl+alt+F2  there i entered the file XF86Config file in  /etc/X11 and try to change some settings in that file in Hsync and Hsync section and rebooted the pc , that time i reported a problem in the terminal as   XFree86.report.log which i have sent and it  is stored in /va/log  folder . so that from here i am not able to enter for Startx  . so i have done some changes in the folder /etc/X11  and  try to  replace the XF86Config file to its  ol d settings and  rebooted the pc . when i type  startx i am getting this problem  and stops going to GUI mode  :
 
 
giving up
 
xinit : No such file or directory  ( errno : 2 ) : unable to connect to X server
xinit : No such process  ( errno : 3 ) : server error
 
 
 
what is the problem with this and how to solve this problem . i am attaching the  files of config file and report file .
 
 
what is the steps to reload the  X  in RHL 8
 
 
Regards
SOMU
 
 


Soma Shekar.B , System Admin
RASS IT Solutions Private Limited
389/1 , 42nd cross , 7th main
5th Block , Jayanagar
Bangalore - 560 041, India
Phone : 98456 49540
Email : [EMAIL PROTECTED]
web: www.rassit.com

Enjoy this Diwali with Y! India Click here

Attachment: XFree86.0.log
Description: 2563046813-XFree86.0.log

Attachment: XFree86.0.log.doc
Description: 1878238240-XFree86.0.log.doc

Attachment: XFree86.1.log.doc
Description: 1621357275-XFree86.1.log.doc

Attachment: XF86Config.doc
Description: 207248218-XF86Config.doc

# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Mouse1" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "dri"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
#       Option  "AutoRepeat"    "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#       Option  "Protocol"      "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
        #Option "XkbOptions"    ""
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "XkbRules" "xfree86"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"    #Option "XkbVariant"    ""
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "IMPS/2"
        Option      "Emulate3Buttons" "no"
        Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        DisplaySize  2  0
        HorizSync    28.5 - 33.5
        VertRefresh  43.0 - 72.0
        Option      "dpms"
EndSection

Section "Device"
        # no known options
        #BusID
        Identifier  "SiS 6326"
        Driver      "sis"
        VendorName  "SiS 6326"
        BoardName   "SiS 6326"
        VideoRam    4096
        Option      "swcursor" ""
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "SiS 6326"
        Monitor    "Monitor0"
        DefaultDepth     8
        SubSection "Display"
                Depth     16
                Modes    "640x480"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     15
                Modes    "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Mode         0666
EndSection

Reply via email to