Update of /cvsroot/xine/gnome-xine/misc/po
In directory sc8-pr-cvs10.sourceforge.net:/tmp/cvs-serv5809/misc/po
Modified Files:
Makefile.in.in
Log Message:
Resync with hg repository.
Index: Makefile.in.in
===================================================================
RCS file: /cvsroot/xine/gnome-xine/misc/po/Makefile.in.in,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- Makefile.in.in 30 Jul 2006 13:03:31 -0000 1.3
+++ Makefile.in.in 9 Dec 2006 14:05:28 -0000 1.4
@@ -1,5 +1,5 @@
# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2004 by Ulrich Drepper <[EMAIL PROTECTED]>
+# Copyright (C) 1995-1997, 2000-2006 by Ulrich Drepper <[EMAIL PROTECTED]>
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU General Public
@@ -8,10 +8,11 @@
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
#
-# Origin: gettext-0.14
+# Origin: gettext-0.15
PACKAGE = @[EMAIL PROTECTED]
VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
SHELL = /bin/sh
@SET_MAKE@
@@ -27,38 +28,45 @@
datarootdir = @datadir@
endif
datadir = @datadir@
-localedir = $(datadir)/locale
+localedir = @localedir@
gettextsrcdir = $(datadir)/gettext/po
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
+mkinstalldirs = $(SHELL) @install_sh@ -d
+mkdir_p = @mkdir_p@
-GMSGFMT = @GMSGFMT@
-MSGFMT = @MSGFMT@
-XGETTEXT = @XGETTEXT@
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
MSGMERGE = msgmerge
MSGMERGE_UPDATE = @MSGMERGE@ --update
MSGINIT = msginit
MSGCONV = msgconv
MSGFILTER = msgfilter
-PO_LINGUAS := $(shell if test -r $(top_srcdir)/po/LINGUAS; then grep -v "^\#"
$(top_srcdir)/po/LINGUAS; fi)
-
-POFILES := $(shell if test -n "$(PO_LINGUAS)"; then LINGUAS="$(PO_LINGUAS)";
else LINGUAS="$(ALL_LINGUAS)"; fi; for lang in $$LINGUAS; do printf "$$lang.po
"; done)
-GMOFILES := $(subst .po,.gmo,$(POFILES))
-UPDATEPOFILES := $(subst .po,.po-update,$(POFILES))
-DUMMYPOFILES := $(subst .po,.nop,$(POFILES))
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
DISTFILES.common = Makefile.in.in remove-potcdate.sin \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2)
$(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
POTFILES = \
-CATALOGS = $(GMOFILES)
+CATALOGS = @CATALOGS@
# Makevars gets inserted here. (Don't remove this line!)
@@ -67,13 +75,13 @@
.po.mo:
@echo "$(MSGFMT) -c -o $@ $<"; \
- $(MSGFMT) -c -o t-$@ $< && if test -f t-$@; then mv t-$@ $@; else touch
$@; fi
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
.po.gmo:
@lang=`echo $* | sed -e 's,.*/,,'`; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o
$${lang}.gmo $${lang}.po"; \
- cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o
t-$${lang}.gmo $${lang}.po && if test -f t-$${lang}.gmo; then mv t-$${lang}.gmo
$${lang}.gmo; else touch $${lang}.gmo; fi
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o
t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
.sin.sed:
sed -e '/^#/d' $< > t-$@
@@ -81,12 +89,16 @@
all: [EMAIL PROTECTED]@
-debug: all
-install-debug: install
all-yes: stamp-po
all-no:
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
# stamp-po is a timestamp denoting the last time at which the CATALOGS have
# been loosely updated. Its purpose is that when a developer or translator
# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
@@ -96,10 +108,13 @@
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
- test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
- @echo "touch stamp-po"
- @echo timestamp > stamp-poT
- @mv stamp-poT stamp-po
+ test ! -f $(srcdir)/$(DOMAIN).pot || \
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
+ echo "touch stamp-po" && \
+ echo timestamp > stamp-poT && \
+ mv stamp-poT stamp-po; \
+ }
# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
@@ -108,12 +123,16 @@
# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' =
'@'PACKAGE_BUGREPORT'@'; then \
+ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+ else \
+ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+ fi; \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
- --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)' \
- --add-comments
+ --msgid-bugs-address="$$msgid_bugs_address"
test ! -f $(DOMAIN).po || { \
if test -f $(srcdir)/$(DOMAIN).pot; then \
sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot >
$(DOMAIN).1po && \
@@ -152,7 +171,7 @@
install-exec:
install-data: [EMAIL PROTECTED]@
if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
for file in $(DISTFILES.common) Makevars.template; do \
$(INSTALL_DATA) $(srcdir)/$$file \
$(DESTDIR)$(gettextsrcdir)/$$file; \
@@ -165,13 +184,13 @@
fi
install-data-no: all
install-data-yes: all
- $(mkinstalldirs) $(DESTDIR)$(datadir)
+ $(mkdir_p) $(DESTDIR)$(datadir)
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkinstalldirs) $(DESTDIR)$$dir; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat;
fi; \
$(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
@@ -211,19 +230,19 @@
installdirs-exec:
installdirs-data: [EMAIL PROTECTED]@
if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
else \
: ; \
fi
installdirs-data-no:
installdirs-data-yes:
- $(mkinstalldirs) $(DESTDIR)$(datadir)
+ $(mkdir_p) $(DESTDIR)$(datadir)
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkinstalldirs) $(DESTDIR)$$dir; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
if test -n "$$lc"; then \
if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc
2>/dev/null) | grep ' -> ' >/dev/null; then \
@@ -298,11 +317,14 @@
$(MAKE) update-po
@$(MAKE) dist2
# This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
+dist2: stamp-po $(DISTFILES)
dists="$(DISTFILES)"; \
if test "$(PACKAGE)" = "gettext-tools"; then \
dists="$$dists Makevars.template"; \
fi; \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ dists="$$dists $(DOMAIN).pot stamp-po"; \
+ fi; \
if test -f $(srcdir)/ChangeLog; then \
dists="$$dists ChangeLog"; \
fi; \
@@ -314,9 +336,9 @@
if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
for file in $$dists; do \
if test -f $$file; then \
- cp -p $$file $(distdir); \
+ cp -p $$file $(distdir) || exit 1; \
else \
- cp -p $(srcdir)/$$file $(distdir); \
+ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
fi; \
done
@@ -363,10 +385,9 @@
update-gmo: Makefile $(GMOFILES)
@:
-Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status
@POMAKEFILEDEPS@
cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/[EMAIL PROTECTED] CONFIG_HEADERS= \
- $(SHELL) ./config.status
+ && $(SHELL) ./config.status $(subdir)/[EMAIL PROTECTED] po-directories
force:
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Xine-cvslog mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xine-cvslog
