Em Mon, 28 Oct 2002 10:02:24 -0800 (PST) Davide Libenzi <[EMAIL PROTECTED]> escreveu: DL> DL> On Mon, 28 Oct 2002, Jos=E9 Roberto Kerne wrote: DL> DL> > DL> > Hello. DL> > DL> > I need use xmail to relay messages from domain, sample: DL> > DL> > Server 1 - xmail DL> > domain1 DL> > domain2 DL> > domain3 DL> > DL> > Server 2 - other DL> > domain4 DL> > DL> > DL> > I need Server1, relay messages from 0/0 to domain (domain4) for Server 2. DL> > DL> > Tips ? DL> DL> Usually not getting response from previous message should enforce a longer DL> explanation of what you intend to accomplish than : DL> DL> "I need Server1, relay messages from 0/0 to domain (domain4) for Server 2" DL>
This is necessary, because the DNS propagation is very slow... I need 1 week for DNS is update in Internet hosts... Sample: hotmail.com, etc... I try send mail from yahoo.com and this is success received in my new server, for domain4!!! but hotmail dont deliver, sending message in return: --cut- [<02>] The reason of the delivery failure was: 550 Relay denied --cut- This domain is transfered of server1 to server2. Then, server2 have a new IP, and DNS zone dont updated internet yet! I need permit relay only to domain (domain4) in server1 for any (0/0). My server (server1) then send all messages if domain (domain4) to server2 (domain4 accouns is hosted). Tips ??? Thanks Kerne DL> DL> DL> - Davide DL> DL> DL> - DL> To unsubscribe from this list: send the line "unsubscribe xmail" in DL> the body of a message to [EMAIL PROTECTED] DL> For general help: send the line "help" in the body of a message to DL> [EMAIL PROTECTED] DL> DL> - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
