Ok I tried deleting the DNS cache and that did not work either. It has to have something to do with the way those messages were encoded when they tried to pass through the first time.
Troy -----Original Message----- From: Troy Rodriguez=20 Sent: Wednesday, March 26, 2003 11:28 AM To: [EMAIL PROTECTED] Not a good time to stop my entire ISP's mailserver but I follow what you are saying and might give that a try in a bit. But asre there any other options that could cause this? Thanks. -----Original Message----- From: Frederik Gallon [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 26, 2003 11:26 AM To: '[EMAIL PROTECTED]' Harald ... Is xmail going to remake 0-100 sub-dirs?? > -----Oorspronkelijk bericht----- > Van: Harald Schneider [mailto:[EMAIL PROTECTED] > Verzonden: woensdag 26 maart 2003 18:23 > Aan: [EMAIL PROTECTED] > Onderwerp: [xmail] AW: Re: Froz msg resend >=3D20 >=3D20 >=3D20 > - Stop xmail server > - cd dnscache > - delete all inside that folder > - mkdir ns=3D3D20 > - mkdir mx > - Start Xmail >=3D20 > --Harald >=3D20 >=3D20 > > -----Urspr=3D3DFCngliche Nachricht----- > > Von: [EMAIL PROTECTED] =3D20 > >[mailto:[EMAIL PROTECTED] Im Auftrag von Troy Rodriguez > > Gesendet: Mittwoch, 26. M=3D3DE4rz 2003 17:58 > > An: [EMAIL PROTECTED] > > Betreff: [xmail] Re: Froz msg resend > >=3D3D20 > >=3D3D20 > >=3D3D20 > > How do you clear the DNS cache on Xmail server? I think that=3D3D20 = =3D is=3D20 > >where my problem is. > >=3D3D20 > > -----Original Message----- > > From: Frederik Gallon [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, March 26, 2003 10:34 AM > > To: '[EMAIL PROTECTED]' > >=3D3D20 > >=3D3D20 > > Change the first line of the messages in 'froz' to an other domain. > >=3D3D20 > > Good luck > >=3D3D20 > > > -----Oorspronkelijk bericht----- > > > Van: Troy Rodriguez [mailto:[EMAIL PROTECTED] > > > Verzonden: woensdag 26 maart 2003 16:07 > > > Aan: [EMAIL PROTECTED] > > > Onderwerp: [xmail] Re: Froz msg resend > > >=3D3D3D20 > > >=3D3D3D20 > > >=3D3D3D20 > > > Of course =3D3D3D3D3D) That is the problem. Whenever I try to = =3D3D > defrost=3D3D3D20 > > > the =3D3D3D3D message it stills detects mail loop when I am=3D20 > dead=3D3D3D20 =3D20 > > >positive there is no mail loop. The only thing I can think =3D of=3D3D3D20 > > > is: 1. When the message was first sent it was marked as=3D20 > going=3D3D3D20 =3D20 > > >to a specific IP addresses and it keeps trying to go to = that=3D3D3D20 =3D =3D20 > > >same addy instead of doing a DNS lookup for the MX of that=3D3D3D20 =3D20 > > >domain again. 2. It is using some internal DNS in xmail=3D20 > and=3D3D3D20 the=3D20 > > >MX for that domain is cached wrong somewhere. =3D3D3D20 > > > Troy > > >=3D3D3D20 > > > -----Original Message----- > > > From: Davide Libenzi [mailto:[EMAIL PROTECTED] > > > Sent: Tuesday, March 25, 2003 7:28 PM > > > To: [EMAIL PROTECTED] > > >=3D3D3D20 > > >=3D3D3D20 > > > On Tue, 25 Mar 2003, Troy Rodriguez wrote: > > >=3D3D3D20 > > > > Ok this is going to be long. > > > > > > > > Here is my setup > > > > > > > > 1. XMail server version 1.12 at one location setup with > > > > DNS(windows) > > > > 2. Backup XMail server at remote location server=3D3D20 > > as backup to the > > > > master mail server(windows) > > > > > > > > > > > > > > > > I am running the xmail sync program between the two mail server. > > > > > > > > On the back mail server the xmailsync program is setting=3D3D20 > > up custom=3D3D3D20 > > > > domains with the "smtp" option in mailproc.tab. > > > > > > > > > > > > > > > > I have a client that we are hosting their DNS and=3D3D20 > > providing back MX > > > for > > > > there domain. They have there own mailserver that is the=3D3D20 > > primary MX. > > > > > > > > Their mailserver dropped other day and all mail was=3D3D3D20 > > > redirected to our=3D3D3D20 > > > > mailserver and was held in the queue until the primary=3D3D20 > > came back up. > > > > > > > > However when the primary Server came back up the messages=3D3D20 > > would not=3D3D3D20 > > > > resend to it keeps giving me a "Mailloop detected" error. > > > > > > > > I checked DNS and there is no loop that I can see. And =3D the=3D3D3D20 > > > only thing=3D3D3D20 > > > > setup in the mailserver is a cust domain with the = "smtp"=3D3D3D20 > > > option in the=3D3D3D20 > > > > mailproc.tab for that cust domain. > > > > > > > > How can I get the messages to resend to the primary MX?? =3D If=3D3D3D20 > > > any more=3D3D3D20 > > > > info is needed please ask. > > >=3D3D3D20 > > > Did you check this ? > > >=3D3D3D20 > > http://xmail.marketmix.com/ > >=3D3D20 > > Maybe it can help you. > >=3D3D20 > >=3D3D20 > >=3D3D20 > > - Davide > >=3D3D20 > > - > > To unsubscribe from this list: send the line=3D20 > "unsubscribe=3D3D20 xmail"=3D20 > >in the body > > of a message to [EMAIL PROTECTED] For general help:=3D3D20 > > send the line > > "help" in the body of a message to [EMAIL PROTECTED] > >=3D3D20 > >=3D3D20 > >=3D3D20 > > - > > To unsubscribe from this list: send the line "unsubscribe=3D3D20 > > xmail" in the > > body > > of a message to [EMAIL PROTECTED] For general help:=3D3D20 > > send the line > > "help" in the body of a message to [EMAIL PROTECTED] > > - > > To unsubscribe from this list: send the line "unsubscribe xmail" in > > the body of a message to [EMAIL PROTECTED] > > For general help: send the line "help" in the body of a message to > > [EMAIL PROTECTED] > >=3D3D20 > >=3D3D20 > >=3D3D20 > > - > > To unsubscribe from this list: send the line "unsubscribe xmail" in > > the body of a message to [EMAIL PROTECTED] > > For general help: send the line "help" in the body of a message to > > [EMAIL PROTECTED] > >=3D3D20 >=3D20 > - > To unsubscribe from this list: send the line "unsubscribe=3D20 > xmail" in the body of a message to [EMAIL PROTECTED] > For general help: send the line "help" in the body of a=3D20 > message to [EMAIL PROTECTED] >=3D20 - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
