Davide Libenzi wrote: > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Davide Libenzi > Sent: Sunday, March 20, 2005 10:06 AM > To: [email protected] > Subject: [xmail] Re: Problems with hotmail.com, earthlink, > end of socket stream dtata, on windows PC > > On Sun, 20 Mar 2005, Rob Arends wrote: > <snip>
> > The weird bit is that Xmail will be able send to the domain > perfectly, until > > some time passes, then it only resolves to use the A record > host. A simple > > restart of Xmail fixes the problem (until next time). > > I have debugged the problem enough to know that the MS DNS > that Xmail is > > using for DNS lookups is presenting the correct data to > xmail (packet trace > > proves it) and it includes MX records. Xmail just doesn't > use them. Again > > I asked the list for assistance, which proved fruitless. > > Are you trolling or what? You never posted traces. On that very specific instance no, I didn't post traces. It was to prove to me what was happening, so I could work around the problem. > No, not trolling. With regard to the problem I posted about in Dec 2004 - I emailed both the list and Davide directly (Davide got real ip and email address detail in his emails) with lots of detail. In total there were nearly 10 emails between Davide and myself. But after a few emails for info and results being sent back, the thread died. I even asked what was happening next, and got no response. This is the first email that was sent to the list. http://www.mail-archive.com/[email protected]/msg11745.html The dns issue I had prior to this one is here: http://www.mail-archive.com/[email protected]/msg04589.html If you'd care to re-investigate, I'll be happy to go through it again. Rob :-) > > - Davide > > - > To unsubscribe from this list: send the line "unsubscribe xmail" in > the body of a message to [EMAIL PROTECTED] > For general help: send the line "help" in the body of a message to > [EMAIL PROTECTED] > > - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
