Hiya! Well, we attempted to replace our mailserver this weekend but had to revert back to the older one due to a filter issue that didn't make much sense to me.
Original setup: RH8 XMail 1.22 f-prot (using a modified clamav filter) SA 3.0.2 (using bsa_filter which is a version of Don's sa_filter that was modified by Beau Cox) Everything runs fine on this config. I built a new Suse 10 box, installed xMail 1.22 on it then moved over my /var/MailRoot folder from the old box. This box is running SA 3.0.4 instead of 3.0.2 and I now receive filter errors on the bsa_filter. It also doesn't appear that xMail starts up all 20 of its threads. pstree -p only shows a single xMail entry (but it does show the 5 spamd threads). All I could find on the 'net had to do with possible timeout erros (apparently this is what the -97 means). spamd is running but it almost seems like SA isn't answering when it's called by the filter. Any thoughts off the top of your heads? I can't easily test it as we didnt' have a replacement server (we just yanked the original drive and put this a new one in for the install so we could easily fall back in case of a failure such as this). For grins I was going to bump up the SA version on the RH box to 3.0.4 to see if it caused the same problems but figured I'd post a quick question first. TIA -- later, Dale mailto:[EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
