At 22:05 24.08.2006, you wrote: >On Thu, 24 Aug 2006, Stig Østvang wrote: > >> >> At 15:24 24.08.2006, you wrote: >>> On Thu, 24 Aug 2006, Stig =D8stvang wrote: >>> >>>> >>>> Hi all. >>>> >>>> I've just installed glst on my mail-server, but I get a fork error for= >> each=3D >>>> incomming email. I'm running Xmail 1.22 on CentOS4. The anti-virus check= >> =3D >>>> fires correctly. Here is an example from an incomming mail when xmail is= >> =3D >>>> running in debug-mode. >>>> >>>> SMTP client connection from [67.18.3.134] >>>> execv error: cmd=3D3D'/var/MailRoot/glst' >>>> SMTP filter error (-97): Filter =3D3D "/var/MailRoot/glst" >>>> SMTP client exit [67.18.3.134] >>>> SMAIL local SMTP =3D3D "oestvang.no" From =3D3D <[EMAIL PROTECTED]>= >> To =3D3D=3D >>>> <[EMAIL PROTECTED]> >>>> Filter run: Sender =3D3D "[EMAIL PROTECTED]" Recipient =3D3D=3D >>>> "[EMAIL PROTECTED]" Filter =3D3D= >> "/var/MailRoot/filters/antivir/checkvirus.pl"=3D >>>> Retcode =3D3D 7 >>>> >>>> Anyone have any good suggestions on what to try? >>> >>> What does `ls -l /var/MailRoot/glst` report? >>> >>> >>> - Davide >> [EMAIL PROTECTED] glst]# ll >> total 44 >> -rwxr-xr-x 1 root root 7591 Aug 24 09:05 dbdump >> -rwxr-xr-x 1 root root 7898 Aug 24 09:05 dbload >> -rwxr-xr-x 1 root root 22644 Aug 24 09:05 glst >> -rwxr--r-- 1 root root 980 Aug 24 11:41 glst.conf >> [EMAIL PROTECTED] glst]# > >Hmmm, you're inside a directory named 'glst' already. Are you sure the >real binary path is not '/var/MailRoot/glst/glst' ? > > > >- Davide
Ah, of course! I used the pre-date file from the tarball and that was assuming the glst binary in /var/MailRoot, right? So in filters.pre-data.tab, I should have /var/MailRoot/glst/glst? I have done this now, and restarted, so just need another mail to come in... :-) Stig - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]