Wasup, I've been away for a few day break.
The problem is that you're passing *.server1 to the grep.
What is this file??
If you look at your (filter) tab file, you'll see in part:
"....test.cmd" "@@FILE"
%0 %1
CMD file access your command line parameters is via the above shown "%n"
variables.
So, your test.cmd should look like this:
@echo off
REM Written by Rob Arends
REM
REM Script to return 16 to Xmail if the email is NOT of high Importance.
setlocal
grep -Pqi "^X-Priority:\s*1\s" %1
set XPriHigh=%ERRORLEVEL%
grep -Pqi "^X-MSMail-Priority:\s*High" %1
set XMSPriHigh=%ERRORLEVEL%
grep -Pqi "^Importance:\s*High" %1
set ImportHigh=%ERRORLEVEL%
if "%XPriHigh%"=="0" goto HighImportance
if "%XMSPriHigh%"=="0" goto HighImportance
if "%ImportHigh%"=="0" goto HighImportance
Rem Defaults to not HighImportance
echo file %1 NOT is important >>mylogfile.txt
exit 16
:HighImportance
echo file %1 is important >>mylogfile.txt
exit 0
:EOF
Note that you are trying to access only one file in this instance of the
filter execution.
You wont want to access any wildcard files like "*.server1".
When you are happy with the results, you can take out the "echo file ..."
lines.
Xmail provides filenames in the format \\?\filename.txt
So if grep does not like these names, you may need to do this after the
setlocal:
----------
set FILE=%1
if "%FILE:~0,4%"=="\\?\" set FILE=%FILE:~4%
----------
Then use %FILE% instead of each %1 in the GREPs.
Also I hope your user's mailproc.tab file looks like this:
"mailbox"[newline]
"external"[tab]"0"[tab]"20"[tab]"cmd /c
d:\xmail\xmail_filters\test.cmd"[tab]"@@FILE"[newline]
"redirect"[tab]"[EMAIL PROTECTED]"[newline]
Note the [newline]s
Rob :-)
_________________________________________________
Note To Self: Remember to put something witty here later...
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of waassssuu pppp
Sent: Tuesday, January 16, 2007 8:45 AM
To: [email protected]
Subject: [xmail] Re: Forwarding High Priority emails
I have got myself all confused now.
I decided that what I should do is just make the server check the emails to
see if they are HIGH PRIORITY and if they are then send it to the Blackberry
device.
I can inform users that if they want a offic user to receive the email on
said users blackberry then send the email HIGH PRI.
No need to keep a list of people now.
I am confused on how to make it work, I am missing one thing somewhere.
Here is the batch file to use
@echo off
setlocal
grep -Pqi "^X-Priority:\s*1\s" *.server1
set XPriHigh=%ERRORLEVEL%
grep -Pqi "^X-MSMail-Priority:\s*High" *.server1
set XMSPriHigh=%ERRORLEVEL%
grep -Pqi "^Importance:\s*High" *.server1
set ImportHigh=%ERRORLEVEL%
if "%XPriHigh%"=="0" goto Found
if "%XMSPriHigh%"=="0" goto Found
if "%ImportHigh%"=="0" goto Found
goto EOF
:Found
NOT SURE WHAT TO PUT HERE, I have had things here and nothing worked.
Nothing was right im sure.
:EOF
My Tab looks like this.
"mailbox"
"external"[tab]"0"[tab]"20"[tab]"cmd /c
d:\xmail\xmail_filters\test.cmd"[tab]"@@FILE"
"redirect"[tab]"[EMAIL PROTECTED]" [newline]
It should only redirect if the message is a high pri message. I chose @@file
cause I use xmail version 1.21 on windows 2000 server and I felt like it had
to look at the file in order to process.
I am unsure if I am doing this correct and if I am, what to put in the batch
file after it reads the file.
Currently, if I send an email to my test user account it redirects to the
yahoo account no matter what its priority, so I do not have something right
in the batch file I think, cause it just proceeding.
On 1/8/07, Ivo Smits <[EMAIL PROTECTED]> wrote:
>
>
> I would check the Importance header first, since it should always be
> there.
> The others are optional.
> I would also immediately check the %ERRORLEVEL% and jump, to save some
> grep/processing time.
>
> I guess I only looked at sample.cmd and skipped sample2.cmd ^_^
> Thank you for telling me about %ERRORLEVEL% :P
>
> By the way, am I the only one having the problem that mail from my server
> to
> hotmail/gmail immediately goes into the Junk folder?
> I publish (CORRECT!) SPF records.
> My Reverse address looks dynamic, but it's semi-static =) (I keep it as
> long
> as my modem isn't offline for more than a week or so).
> What's best? Put my (dynamic-looking) reverse address as the HELO domain,
> or
> should I use my primary domain name (UFO-Net.nl)?
>
> ----- Original Message -----
> From: "Rob Arends" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Monday, January 08, 2007 1:08 PM
> Subject: [xmail] Re: Forwarding High Priority emails
>
>
> >
> > Ivo,
> >
> >> I thought everything that started with X- is an optional/unofficial
> > header.
> >> So "Importance: High" would be an/the official header and should always
> >> be
> >
> >
> > It is, but it can't hurt to check the others too.
> >
> >> And it may be better to check only the 'match found'/'success'
> >> errorlevel,
> >
> >> and skip on EVERYTHING else, to prevent strange behaviour due to grep
> >> failure...
> >
> > My sample2.cmd script does do that, in that if errorlevel is NOT "0",
> then
> > it drops through to "goto EOF", effectively making the script only do
> the
> > 'important' thing if a match.
> > Note GREP.EXE returns 0 on match, 1 on no match and 2 on error - as per
> > grep
> > --help
> >
> >> Note the ^ in the Grep line, it is to make sure the line begins with
> >> Importance, so it can't be matched in the subject or message body.
> >> %ERRORLEVEL% is new to me, I only really used batch files on MS-DOS 6
> ;)
> >
> > I agree with the ^ anchor.
> > So I'd use these lines:
> > ::> grep -Pqi "^X-Priority:\s*1\s" test1.txt
> > ::> grep -Pqi "^X-MSMail-Priority:\s*High" test1.txt
> > ::> grep -Pqi "^Importance:\s*High" test1.txt
> >
> > %ERRORLEVEL% is a NT4/2000/2003 "CMD" thing,
> > as opposed to a DOS/w95/98/me "BAT" thing.
> >
> > Rob :-)
> >
> > _________________________________________________
> > Note To Self: Remember to put something witty here later...
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> > On
> > Behalf Of Ivo Smits
> > Sent: Monday, January 08, 2007 1:13 AM
> > To: [email protected]
> > Subject: [xmail] Re: Forwarding High Priority emails
> >
> >
> > I thought everything that started with X- is an optional/unofficial
> > header.
> > So "Importance: High" would be an/the official header and should always
> be
> > there is the client really wants his mail to be delivered at a high
> > priority.
> > And it may be better to check only the 'match found'/'success'
> errorlevel,
> > and skip on EVERYTHING else, to prevent strange behaviour due to grep
> > failure...
> >
> > -----------------------------------
> > grep "^Importance: High" test2.txt
> > if "%ERRORLEVEL%"=="0" goto Found
> > goto NotFound
> >
> > Found:
> > echo HIGH PRIORITY... deliver to portable device...
> >
> > NotFound:
> > REM Do nothing, just exit
> > -----------------------------------
> >
> > Note the ^ in the Grep line, it is to make sure the line begins with
> > Importance, so it can't be matched in the subject or message body.
> > %ERRORLEVEL% is new to me, I only really used batch files on MS-DOS 6 ;)
> >
> > Ivo
> >
> > ----- Original Message -----
> > From: "Rob Arends" <[EMAIL PROTECTED]>
> > To: <[email protected]>
> > Sent: Sunday, January 07, 2007 2:57 AM
> > Subject: [xmail] Re: Forwarding High Priority emails
> >
> >
> >>
> >> Ivo, On Winxp you are better to use %ERRORLEVEL% - it is easier to work
> >> with. However in concept you are correct.
> >>
> >> Wasup,
> >> First I used grep --help and checked at the bottom for the ERRORLEVEL
> >> codes.
> >> An initial test was done as follows:
> >>
> >> File:: test1.txt
> >> ----------------
> >> X-Priority: 1 (Highest)
> >> X-MSMail-Priority: High
> >> X-Mailer: Microsoft Office Outlook, Build 11.0.6353
> >> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028
> >> Thread-Index: AccwCu5xTRFeu0UMTCOG2y+Fa96J0Q==
> >> Importance: High
> >> ----------------
> >>
> >> File:: test2.txt
> >> ----------------
> >> X-Mailer: Microsoft Office Outlook, Build 11.0.6353
> >> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028
> >> Thread-Index: AccwCu5xTRFeu0UMTCOG2y+Fa96J0Q==
> >> ----------------
> >>
> >> File:: sample.cmd
> >> ----------------
> >> @echo off
> >> grep "X-Priority: 1 (Highest)" test1.txt
> >> echo %ERRORLEVEL%
> >> if "%ERRORLEVEL%"=="1" echo err1
> >> if "%ERRORLEVEL%"=="0" echo err0
> >>
> >> grep "X-Priority: 1 (Highest)" test2.txt
> >> echo %ERRORLEVEL%
> >> if "%ERRORLEVEL%"=="1" echo err1
> >> if "%ERRORLEVEL%"=="0" echo err0
> >> ----------------
> >>
> >> Produced:
> >> ----------------
> >> X-Priority: 1 (Highest)
> >> 0
> >> err0
> >> 1
> >> err1
> >> ----------------
> >>
> >> Ok, so now you've got the basics, you need to get smarter about testing
> >> for
> >> various combinations.
> >> There is perhaps no guarantee that "X-Priority: 1" will look *exactly*
> >> like
> >> that from every MUA.
> >> Also one MUA might use "X-Priority: 1", this another uses
> >> "X-MSMail-Priority: High" and another uses "Importance: High".
> >>
> >> You will need to test for all three, and variations within to be 100%
> >> successful.
> >> I've used grep with -i for case insensitivity, -q for quiet, and -P for
> >> Perl
> >> style Regular Expression matching.
> >> That allows me to use "\s" to match any white space (space/tab) and
> "*"
> >> to
> >> match 0 or more occurrences.
> >> So:
> >> "X-MSMail-Priority:\s*High"
> >> Matches:
> >> "X-MSMail-Priority:High"
> >> "X-MSMail-Priority: High"
> >> "X-MSMail-Priority: High"
> >>
> >> There are numerous webpages on the web for Perl RegEx strings. (Google
> is
> >> your friend)
> >>
> >> Also I used 'setlocal' to keep the environment area for this cmd script
> >> isolated from other currently running instances.
> >>
> >> For example:
> >> File:: sample2.cmd
> >> ----------------
> >> @echo off
> >> setlocal
> >> grep -Pqi "X-Priority:\s*1\s" test1.txt
> >> set XPriHigh=%ERRORLEVEL%
> >>
> >> grep -Pqi "X-MSMail-Priority:\s*High" test1.txt
> >> set XMSPriHigh=%ERRORLEVEL%
> >>
> >> grep -Pqi "Importance:\s*High" test1.txt
> >> set ImportHigh=%ERRORLEVEL%
> >>
> >> if "%XPriHigh%"=="0" goto Found
> >> if "%XMSPriHigh%"=="0" goto Found
> >> if "%ImportHigh%"=="0" goto Found
> >>
> >> goto EOF
> >>
> >> :Found
> >> echo This is a High Priority email
> >>
> >> :EOF
> >> ----------------
> >>
> >> The above sample2.cmd would match on ALL three High priority
> statements.
> >> If
> >> you edit the file test1.txt to simulate all, some or none of the three
> >> priority statements, then you'll see how it works.
> >>
> >> So you should be able to incorporate sample2.cmd into your
> blackberry.cmd
> >>
> >> Rob :-)
> >>
> >> _________________________________________________
> >> Note To Self: Remember to put something witty here later...
> >>
> >>
> >> -----Original Message-----
> >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> ]
> >> On
> >> Behalf Of Ivo Smits
> >> Sent: Saturday, January 06, 2007 10:33 AM
> >> To: [email protected]
> >> Subject: [xmail] Re: Forwarding High Priority emails
> >>
> >>
> >> Hmmmz...
> >> According to M$ website: if [not] errorlevel number command [else
> >> expression]
> >> Using this on grep:
> >> --> if errorlevel 1 goto fail
> >> --> goto success
> >>
> >>
> >>
> >> -
> >> To unsubscribe from this list: send the line "unsubscribe xmail" in
> >> the body of a message to [EMAIL PROTECTED]
> >> For general help: send the line "help" in the body of a message to
> >> [EMAIL PROTECTED]
> >>
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe xmail" in
> > the body of a message to [EMAIL PROTECTED]
> > For general help: send the line "help" in the body of a message to
> > [EMAIL PROTECTED]
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe xmail" in
> > the body of a message to [EMAIL PROTECTED]
> > For general help: send the line "help" in the body of a message to
> > [EMAIL PROTECTED]
> >
>
> -
> To unsubscribe from this list: send the line "unsubscribe xmail" in
> the body of a message to [EMAIL PROTECTED]
> For general help: send the line "help" in the body of a message to
> [EMAIL PROTECTED]
>
>
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the line "help" in the body of a message to
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the line "help" in the body of a message to
[EMAIL PROTECTED]
