Dear Clement Francis / Davide - > First at all xmail doc for smtp.ipprop.tab syntax says : > "Address selection mask are formed by an IP address > (network) plus the number of valid bits inside the network mask" > [...snip...] > "96.227.65.4/32" "WhiteList=1"
Yes, I was wondering if the parser would just assume that without the slash it figure out that was were referencing a single node. Well, I made the above change and it still does NOT work; in other words I still get the "551 Server use forbidden" error message. Also, tested the xMail server against my local IP (10.0.0.25), as I have a VPN connection to the eMail server as well and that did NOT work as well. And the answer is YES, when I test the 96. address I dropped the VPN tunnel before testing. I also thought of another idea to determine if xMail returns the correct data.... I performed the following command: ctrlclnt -s XX.XX.XX.XX -n XXXX -u Y -p Z cfgfileget smtp.ipprop.tab The command line program returned: "10.0.0.0/16" "WhiteList=1" "64.18.0.0/20" "WhiteList=1" "96.227.65.4/32" "WhiteList=1" Unless you have any further suggestions... What is our next step? Thanks, Hal Dell ePodWorks.net, Inc. Managing Partner - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
