Davide, These were copied directly from your documentation, which use capitals. Regardless, I've now tried with lower case and I still get the following error:
ErrCode = -41 ErrString = Bad server response ErrInfo = 504 5.7.4 Unrecognized authentication type SMAIL SMTP-Send FWD = "smtp.secure.net:587,NeedTLS=1" SMTP = "xmailserver.test" From = "[email protected]" To = "[email protected]" Failed ! SMTP-Error = "504 5.7.4 Unrecognized authentication type" SMTP-Server = "smtp.secure.net:587,NeedTLS=1" ________________________________________ From: [email protected] [[email protected]] On Behalf Of Davide Libenzi [[email protected]] Sent: 04 March 2010 07:46 To: XMail Users Mailing List Subject: Re: [xmail] Relay to different SMTP servers requiring authentication On Thu, 4 Mar 2010, Colin Johnston wrote: > Thanks Davide, > > However, could you confirm that I've got the setup basically correct? I've > also tried changing the routing to go through stunnel, without TLS, which I > know works directly from my email client, but I couldn't get that to work > either: > > smtpfwd.tab - > > "secure.net" "localhost:2525" > > \userauth\smtp\localhost.tab - > > "PLAIN" "myusername" "437687234219932" > or > "LOGIN" "myusername" "437687234219932" > > Is my understanding of the use of the userauth\smtp\xxxx.tab file correct? Partially. Everything is case sensitive in XMail, so, "plain" and "login". - Davide _______________________________________________ xmail mailing list [email protected] http://xmailserver.org/mailman/listinfo/xmail _______________________________________________ xmail mailing list [email protected] http://xmailserver.org/mailman/listinfo/xmail
