Glad to hear it is working at least in 32 bits.
LibXMLSec requires C99 so I am not sure what problems are you
running into with 64 bit mode. As before, I would recommend to
recompile all libraries (libxml2, libxslt, openssl) in 64 bit
mode as well.
Best,
Aleksey
On 5/30/22 7:11 PM, Hany Heggy wrote:
Finally, xmlsec is built and working on AIX 7.1.5.7 but in 32-Bit mode
only, trying to compile with 64-Bit failed.
I just wonder if xmlse does not support 64-Bit mode on AIX ?
On Tue, May 24, 2022 at 5:20 PM Aleksey Sanin <[email protected]
<mailto:[email protected]>> wrote:
You might want to recompile from sources both libxml2 and libxslt.
Something is not right with your installation.
Aleksey
On 5/24/22 11:14 AM, Hany Heggy wrote:
> Thanks for your help
>
> i compiled xmlsec but while calling it it give the error
>
> [root@UAT4] /usr/local/bin > ./xmlsec1
> exec(): 0509-036 Cannot load program ./xmlsec1 because of the
following
> errors:
> 0509-130 Symbol resolution failed for
> /usr/lib/libxslt.a(libxslt.so.1) because:
> 0509-136 Symbol xmlBufUse (number 36) is not exported from
> dependent module
/usr/lib/libxml2.a(libxml2.so.2).
> 0509-136 Symbol xmlBufContent (number 37) is not
exported from
> dependent module
/usr/lib/libxml2.a(libxml2.so.2).
> 0509-026 System error: Error 0
> 0509-192 Examine .loader section symbols with the
> 'dump -Tv' command.
>
>
>
> On Tue, May 24, 2022 at 4:20 PM Aleksey Sanin
<[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>> wrote:
>
> BTW if you just need openssl and don't need gcrypt, you can
disable it
> with --without-gcrypt in configure script.
>
> Aleksey
>
> On 5/24/22 10:01 AM, Aleksey Sanin wrote:
> > Sounds like there are some problems with libintl. Sorry I
can't
> > really help you with debugging build issues on AIX.
> >
> > Best,
> >
> > Aleksey
> >
> > On 5/24/22 9:45 AM, Hany Heggy wrote:
> >> thanks Aleksey
> >>
> >> i got this error while make all
> >> CC libxmlsec1_openssl_la-signatures.lo
> >> CC libxmlsec1_openssl_la-symkeys.lo
> >> CC libxmlsec1_openssl_la-x509.lo
> >> CC libxmlsec1_openssl_la-x509vfy.lo
> >> CCLD libxmlsec1-openssl.la
<http://libxmlsec1-openssl.la> <http://libxmlsec1-openssl.la
<http://libxmlsec1-openssl.la>>
> <http://libxmlsec1-openssl.la <http://libxmlsec1-openssl.la>
<http://libxmlsec1-openssl.la <http://libxmlsec1-openssl.la>>>
> >> Target "all" is up to date.
> >> Making all in gcrypt
> >> CC libxmlsec1_gcrypt_la-app.lo
> >> CC libxmlsec1_gcrypt_la-asn1.lo
> >> CC libxmlsec1_gcrypt_la-ciphers.lo
> >> CC libxmlsec1_gcrypt_la-crypto.lo
> >> CC libxmlsec1_gcrypt_la-digests.lo
> >> CC libxmlsec1_gcrypt_la-hmac.lo
> >> CC libxmlsec1_gcrypt_la-kw_aes.lo
> >> CC libxmlsec1_gcrypt_la-kw_des.lo
> >> CC libxmlsec1_gcrypt_la-symkeys.lo
> >> CC libxmlsec1_gcrypt_la-asymkeys.lo
> >> CC libxmlsec1_gcrypt_la-signatures.lo
> >> CCLD libxmlsec1-gcrypt.la
<http://libxmlsec1-gcrypt.la> <http://libxmlsec1-gcrypt.la
<http://libxmlsec1-gcrypt.la>>
> <http://libxmlsec1-gcrypt.la <http://libxmlsec1-gcrypt.la>
<http://libxmlsec1-gcrypt.la <http://libxmlsec1-gcrypt.la>>>
> >> grep: can't open /opt/freeware/lib/libintl.la
<http://libintl.la>
> <http://libintl.la <http://libintl.la>> <http://libintl.la
<http://libintl.la> <http://libintl.la <http://libintl.la>>>
> >> sed: Cannot find or open file
/opt/freeware/lib/libintl.la <http://libintl.la>
> <http://libintl.la <http://libintl.la>>
> >> <http://libintl.la <http://libintl.la> <http://libintl.la
<http://libintl.la>>>.
> >> libtool: error: '/opt/freeware/lib/libintl.la
<http://libintl.la>
> <http://libintl.la <http://libintl.la>> <http://libintl.la
<http://libintl.la> <http://libintl.la <http://libintl.la>>>'
> >> is not a valid libtool archive
> >> make: 1254-004 The error code from the last command is 1.
> >>
> >>
> >> Stop.
> >> make: 1254-004 The error code from the last command is 1.
> >>
> >>
> >> Stop.
> >> make: 1254-004 The error code from the last command is 1.
> >>
> >>
> >> Stop.
> >> make: 1254-004 The error code from the last command is 2.
> >>
> >>
> >> Stop.
> >>
> >>
> >> On Tue, May 24, 2022 at 3:32 PM Aleksey Sanin
> <[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>
> >> <mailto:[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>>> wrote:
> >>
> >> Sorry I don't understand your question.
> >>
> >> BTW, you might want to consider using
[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
> >> <mailto:[email protected]
<mailto:[email protected]> <mailto:[email protected]
<mailto:[email protected]>>>
> mailing list
> >> since there might be someone who is using xmlsec on AIX.
> >>
> >> Best,
> >>
> >> Aleksey
> >>
> >> On 5/24/22 8:46 AM, Hany Heggy wrote:
> >> > Thanks for your prompt reply, I will try to
compile the
> source.
> >> >
> >> > i have the following on my AIX
> >> > IBM openssl
> >> > libxml2, libiconv
> >> > libxslt
> >> > i don't need dynamic crypto loading
> >> >
> >> > The question is: is there any possibility that the
> compilation
> >> fail if
> >> > the open ssl version needed for rpm
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > On Tue, May 24, 2022 at 2:33 PM Aleksey Sanin
> >> <[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>
> <mailto:[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>>
> >> > <mailto:[email protected]
<mailto:[email protected]> <mailto:[email protected]
<mailto:[email protected]>>
> <mailto:[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>>>> wrote:
> >> >
> >> > I don't provide RPMs any longer but you can
download the
> >> source code
> >> > and compile it yourself. In general, xmlsec
depends on
> >> > - One or more crypto libraries (openssl, nss,
gnutls)
> >> > - libxml2 (which might depend on libiconv)
> >> > - libxslt
> >> > - libltdl (needed only if you use dyanmic
crypto loading)
> >> >
> >> >
> >> > Aleksey
> >> >
> >> > On 5/24/22 7:28 AM, Hany Heggy wrote:
> >> > > Is there a way to get the xmlsec as AIX BFF
package
> >> format ?
> >> > >
> >> > > On Tue, May 24, 2022 at 1:26 PM Hany Heggy
> >> <[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>
> <mailto:[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>>
> >> > <mailto:[email protected]
<mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
<mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>>
> >> > > <mailto:[email protected]
<mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
<mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>
> >> <mailto:[email protected]
<mailto:[email protected]> <mailto:[email protected]
<mailto:[email protected]>>
> <mailto:[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>>>>> wrote:
> >> > >
> >> > > Dears,
> >> > >
> >> > > we need your support to install xmlsec
on AIX 7.1
> >> > > here is a lit of installed rpm on AIX
server
> >> > >
> >> > > [root@UAT4] /root/bin > rpm -qa
> >> > > expect-5.42.1-3.ppc
> >> > > libiconv-1.14-22.ppc
> >> > > nedit-5.5-1.ppc
> >> > > expat-devel-2.1.1-1.ppc
> >> > > pkg-config-0.29.1-1.ppc
> >> > > db-4.8.24-4.ppc
> >> > > bash-4.3.30-1.ppc
> >> > > info-5.0-2.ppc
> >> > > readline-6.2-3.ppc
> >> > > zlib-1.2.7-1.ppc
> >> > > libgcc-6.3.0-1.ppc
> >> > > sqlite-3.15.2-1.ppc
> >> > > glib2-2.48.0-1.ppc
> >> > > ncurses-6.0-1.ppc
> >> > > libgcrypt-1.8.2-1.ppc
> >> > > libgpg-error-devel-1.27-1.ppc
> >> > > libxslt-devel-1.1.32-1.ppc
> >> > > tcl-8.4.7-3.ppc
> >> > > xz-libs-5.2.2-1.ppc
> >> > > unzip-6.0-3.ppc
> >> > > zlib-devel-1.2.7-1.ppc
> >> > > gdbm-1.12-1.ppc
> >> > > libxml2-2.9.5-1.ppc
> >> > > libxml2-devel-2.9.5-1.ppc
> >> > > python-2.7.13-1.ppc
> >> > > tk-8.4.7-3.ppc
> >> > > gettext-0.17-8.ppc
> >> > > gcc-4.2.0-3.ppc
> >> > > expat-2.1.1-1.ppc
> >> > > libffi-3.0.12-1.ppc
> >> > > xz-devel-5.2.2-1.ppc
> >> > > libstdc++-6.3.0-1.ppc
> >> > > glib2-devel-2.48.0-1.ppc
> >> > > libgpg-error-1.27-1.ppc
> >> > > libxslt-1.1.32-1.ppc
> >> > > libgcrypt-devel-1.8.2-1.ppc
> >> > > AIX-rpm-7.1.5.32-7.ppc
> >> > >
> >> > > the provided xmlsec rpms on the site
request
> lots of
> >> other rpms,
> >> > > Is there any way to find all needed rpms
> bundled or
> >> compile
> >> > the source ?
> >> > >
> >> > >
> >> > > --
> >> > > Regards,
> >> > >
> >> > > Hany Heggy
> >> > >
> >> > >
> >> > >
> >> > > --
> >> > > Regards,
> >> > >
> >> > > Hany Heggy
> >> > >
> >> >
> >> >
> >> >
> >> > --
> >> > Regards,
> >> >
> >> > Hany Heggy
> >> >
> >>
> >>
> >>
> >> --
> >> Regards,
> >>
> >> Hany Heggy
> >>
> > _______________________________________________
> > xmlsec mailing list
> > [email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>
> > http://www.aleksey.com/mailman/listinfo/xmlsec
<http://www.aleksey.com/mailman/listinfo/xmlsec>
> <http://www.aleksey.com/mailman/listinfo/xmlsec
<http://www.aleksey.com/mailman/listinfo/xmlsec>>
>
>
>
> --
> Regards,
>
> Hany Heggy
>
--
Regards,
Hany Heggy
_______________________________________________
xmlsec mailing list
[email protected]
http://www.aleksey.com/mailman/listinfo/xmlsec
