Hi, Michel,
But I mean in the Xsever1.7.1 or Xserver1.8.99, the maskX and maskY
values are 0, this is why?
Thanks,
Hunk Cui
-----Original Message-----
From: Michel Dänzer [mailto:[email protected]]
Sent: Wednesday, June 02, 2010 7:26 PM
To: Cui, Hunk
Cc: Alex Deucher; Kai-Uwe Behrmann; [email protected]; [email protected];
[email protected]
Subject: RE: The RandR-"unable to set rotation" issue in AMD Geode LX platform
On Mit, 2010-06-02 at 19:15 +0800, Cui, Hunk wrote:
>
> #0 lx_do_composite (pxDst=0x8bef7f0, srcX=0, srcY=0, maskX=13860,
> maskY=-1740, dstX=0, dstY=0, width=1024, height=768) at lx_exa.c:992
[...]
> #4 CompositePicture (op=1 '\001', pSrc=0x8bb2fc0, pMask=0x0, pDst=0x8bb41c0,
> xSrc=0, ySrc=0, xMask=<value optimized out>, yMask=<value optimized out>,
> xDst=<value optimized out>, yDst=<value optimized out>, width=1024,
> height=768) at picture.c:1675
[...]
> The lx_do_composite function is the Geode-driver function, the others
> are the XServer function, when I replace to the Xsever1.7.1 or
> Xserver1.8.99, the maskX and maskY values are 0. That make me doubt
> it. Can you have some other opinion?
As there's no mask involved in the composite operation (pMask == NULL),
the mask coordinates are irrelevant.
--
Earthling Michel Dänzer | http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
_______________________________________________
[email protected]: X.Org development
Archives: http://lists.x.org/archives/xorg-devel
Info: http://lists.x.org/mailman/listinfo/xorg-devel
