Hi everybody!
A full build of xorg (todays git sources) succeeded, but the
server fails to load the keymap.
[ 1231.896] (EE) Error loading keymap
/home/knut/fast/xorg/X11-z/usr/share/X11/xkb/compiled/server-0.xkm
[ 1231.896] (EE) XKB: Failed to load keymap. Loading default keymap instead.
/home/knut/fast/xorg/X11-z/usr/share/X11/xkb/compiled/ does not
contain any compiled keymaps.
That´s also true for a full build from the 2013-09-13 git trees,
But that server succeeds to load the german keymap file
defined in the configuration files.
The log files of both servers are (aside from time codes and version infos)
identical,
only the EE lines are missing in the 09-13 log.
Both servers use the same config files and were built with the same script.
I keep a version files or every build, so a ""diff -y --suppress-common-lines
X11-[y,z]/versions > diffversions
produced the attached file describing the differences of the sources used.
I don´t see any candidate for that changed behaviour.
Any idea?
Knut
[ 1231.457]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 1231.461]
X.Org X Server 1.14.99.1
Release Date: 2013-04-24
[ 1231.471] X Protocol Version 11, Revision 0
[ 1231.474] Build Operating System: Linux 3.12.0-rc3-main+ i686
[ 1231.477] Current Operating System: Linux golem.site 3.12.0-rc3-main+ #68 PREEMPT Tue Oct 1 09:54:58 CEST 2013 i686
[ 1231.477] Kernel command line: root=/dev/disk/by-id/ata-KINGSTON_SKC100S3120G_50026B722C05CA1A-part1 [email protected]/eth0,[email protected]/00:01:80:62:cf:b1 sky2.legacy_pme=1 acpi_enforce_resources=lax drm.debug=0x0 3 resume=/dev/sda3
[ 1231.488] Build Date: 01 October 2013 04:43:58PM
[ 1231.492]
[ 1231.495] Current version of pixman: 0.31.1
[ 1231.502] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1231.502] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1231.517] (==) Log file: "/home/knut/fast/xorg/X11-z/var/log/Xorg.0.log", Time: Tue Oct 1 19:03:48 2013
[ 1231.521] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1231.525] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1231.525] (==) No Layout section. Using the first Screen section.
[ 1231.525] (==) No screen section available. Using defaults.
[ 1231.526] (**) |-->Screen "Default Screen Section" (0)
[ 1231.526] (**) | |-->Monitor "<default monitor>"
[ 1231.526] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1231.526] (**) | |-->Device "Card0"
[ 1231.526] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1231.526] (==) Automatically adding devices
[ 1231.526] (==) Automatically enabling devices
[ 1231.526] (==) Automatically adding GPU devices
[ 1231.526] (==) FontPath set to:
/home/knut/fast/xorg/X11-z/usr/share/fonts/X11/misc/,
/home/knut/fast/xorg/X11-z/usr/share/fonts/X11/TTF/,
/home/knut/fast/xorg/X11-z/usr/share/fonts/X11/OTF/,
/home/knut/fast/xorg/X11-z/usr/share/fonts/X11/Type1/,
/home/knut/fast/xorg/X11-z/usr/share/fonts/X11/100dpi/,
/home/knut/fast/xorg/X11-z/usr/share/fonts/X11/75dpi/
[ 1231.526] (==) ModulePath set to "/home/knut/fast/xorg/X11-z/usr/lib/xorg/modules"
[ 1231.526] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1231.526] (II) Loader magic: 0x828e620
[ 1231.526] (II) Module ABI versions:
[ 1231.526] X.Org ANSI C Emulation: 0.4
[ 1231.526] X.Org Video Driver: 14.1
[ 1231.526] X.Org XInput driver : 19.2
[ 1231.526] X.Org Server Extension : 7.0
[ 1231.527] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1231.532] (--) PCI:*(0:0:2:0) 8086:2592:a0a0:0554 rev 4, Mem @ 0xd5300000/524288, 0xc0000000/268435456, 0xd5400000/262144, I/O @ 0x0000e400/8
[ 1231.532] (--) PCI: (0:0:2:1) 8086:2792:a0a0:0554 rev 4, Mem @ 0xd5380000/524288
[ 1231.532] (--) PCI: (0:5:5:0) 14f1:8800:0070:6906 rev 5, Mem @ 0xd0000000/16777216
[ 1231.534] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1231.538] Initializing built-in extension Generic Event Extension
[ 1231.541] Initializing built-in extension SHAPE
[ 1231.545] Initializing built-in extension MIT-SHM
[ 1231.549] Initializing built-in extension XInputExtension
[ 1231.552] Initializing built-in extension XTEST
[ 1231.556] Initializing built-in extension BIG-REQUESTS
[ 1231.559] Initializing built-in extension SYNC
[ 1231.563] Initializing built-in extension XKEYBOARD
[ 1231.566] Initializing built-in extension XC-MISC
[ 1231.569] Initializing built-in extension XINERAMA
[ 1231.573] Initializing built-in extension XFIXES
[ 1231.576] Initializing built-in extension RENDER
[ 1231.579] Initializing built-in extension RANDR
[ 1231.583] Initializing built-in extension COMPOSITE
[ 1231.586] Initializing built-in extension DAMAGE
[ 1231.589] Initializing built-in extension MIT-SCREEN-SAVER
[ 1231.592] Initializing built-in extension DOUBLE-BUFFER
[ 1231.595] Initializing built-in extension RECORD
[ 1231.598] Initializing built-in extension DPMS
[ 1231.601] Initializing built-in extension X-Resource
[ 1231.604] Initializing built-in extension XVideo
[ 1231.607] Initializing built-in extension XVideo-MotionCompensation
[ 1231.610] Initializing built-in extension XFree86-VidModeExtension
[ 1231.613] Initializing built-in extension XFree86-DGA
[ 1231.615] Initializing built-in extension XFree86-DRI
[ 1231.618] Initializing built-in extension DRI2
[ 1231.618] (II) "glx" will be loaded by default.
[ 1231.618] (II) LoadModule: "glx"
[ 1231.618] (II) Loading /home/knut/fast/xorg/X11-z/usr/lib/xorg/modules/extensions/libglx.so
[ 1231.619] (II) Module glx: vendor="X.Org Foundation"
[ 1231.619] compiled for 1.14.99.1, module version = 1.0.0
[ 1231.619] ABI class: X.Org Server Extension, version 7.0
[ 1231.619] (==) AIGLX enabled
[ 1231.621] Loading extension GLX
[ 1231.621] (II) LoadModule: "intel"
[ 1231.622] (II) Loading /home/knut/fast/xorg/X11-z/usr/lib/xorg/modules/drivers/intel_drv.so
[ 1231.622] (II) Module intel: vendor="X.Org Foundation"
[ 1231.622] compiled for 1.14.99.1, module version = 2.99.903
[ 1231.622] Module class: X.Org Video Driver
[ 1231.622] ABI class: X.Org Video Driver, version 14.1
[ 1231.622] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 1231.623] (--) using VT number 2
[ 1231.644] (II) intel(0): SNA compiled from 2.99.903-13-gc724098
[ 1231.645] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1231.645] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1231.645] (==) intel(0): RGB weight 888
[ 1231.645] (==) intel(0): Default visual is TrueColor
[ 1231.645] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 1231.646] (--) intel(0): CPU: x86, sse2
[ 1231.646] (**) intel(0): Framebuffer tiled
[ 1231.646] (**) intel(0): Pixmaps tiled
[ 1231.646] (**) intel(0): "Tear free" disabled
[ 1231.646] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 1231.646] (II) intel(0): Output VGA1 has no monitor section
[ 1231.646] (II) intel(0): Output DVI1 has no monitor section
[ 1231.646] (II) intel(0): Output TV1 has no monitor section
[ 1231.646] (II) intel(0): Output TV2 has no monitor section
[ 1231.646] (II) intel(0): Output TV3 has no monitor section
[ 1231.646] (II) intel(0): Output VGA2 has no monitor section
[ 1231.646] (II) intel(0): Output TV4 has no monitor section
[ 1231.646] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 1231.646] (--) intel(0): Output DVI1 using initial mode 1280x1024 on pipe 0
[ 1231.646] (==) intel(0): DPI set to (96, 96)
[ 1231.646] (II) Loading sub module "dri2"
[ 1231.646] (II) LoadModule: "dri2"
[ 1231.646] (II) Module "dri2" already built-in
[ 1231.646] (==) Depth 24 pixmap format is 32 bpp
[ 1231.647] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 1231.647] (==) intel(0): Backing store disabled
[ 1231.647] (==) intel(0): Silken mouse enabled
[ 1231.647] (II) intel(0): HW Cursor enabled
[ 1231.647] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1231.650] (==) intel(0): DPMS enabled
[ 1231.650] (II) intel(0): [DRI2] Setup complete
[ 1231.650] (II) intel(0): [DRI2] DRI driver: i915
[ 1231.650] (II) intel(0): direct rendering: DRI2 Enabled
[ 1231.650] (==) intel(0): hotplug detection: "enabled"
[ 1231.650] (--) RandR disabled
[ 1231.671] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1231.671] (II) AIGLX: enabled GLX_ARB_create_context
[ 1231.671] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1231.671] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1231.671] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1231.671] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1231.672] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1231.672] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1231.672] (II) AIGLX: Loaded and initialized i915
[ 1231.672] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1231.696] (II) intel(0): switch to mode [email protected] on pipe 0 using DVI1, position (0, 0), rotation normal
[ 1231.716] (II) intel(0): Setting screen physical size to 338 x 270
[ 1231.862] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1231.863] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1231.863] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1231.863] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 1231.863] (II) LoadModule: "evdev"
[ 1231.863] (II) Loading /home/knut/fast/xorg/X11-z/usr/lib/xorg/modules/input/evdev_drv.so
[ 1231.863] (II) Module evdev: vendor="X.Org Foundation"
[ 1231.863] compiled for 1.14.99.1, module version = 2.8.1
[ 1231.863] Module class: X.Org XInput Driver
[ 1231.863] ABI class: X.Org XInput driver, version 19.2
[ 1231.863] (II) Using input driver 'evdev' for 'Power Button'
[ 1231.863] (**) Power Button: always reports core events
[ 1231.864] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 1231.864] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1231.864] (--) evdev: Power Button: Found keys
[ 1231.864] (II) evdev: Power Button: Configuring as keyboard
[ 1231.864] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 1231.864] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1231.864] (**) Option "xkb_rules" "evdev"
[ 1231.864] (**) Option "xkb_model" "pc104"
[ 1231.864] (**) Option "xkb_layout" "de"
[ 1231.864] (**) Option "xkb_variant" "nodeadkeys"
[ 1231.896] (EE) Error loading keymap /home/knut/fast/xorg/X11-z/usr/share/X11/xkb/compiled/server-0.xkm
[ 1231.896] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 1231.931] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1231.931] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1231.931] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1231.931] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 1231.931] (II) Using input driver 'evdev' for 'Power Button'
[ 1231.932] (**) Power Button: always reports core events
[ 1231.932] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 1231.932] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1231.932] (--) evdev: Power Button: Found keys
[ 1231.932] (II) evdev: Power Button: Configuring as keyboard
[ 1231.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 1231.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1231.932] (**) Option "xkb_rules" "evdev"
[ 1231.932] (**) Option "xkb_model" "pc104"
[ 1231.932] (**) Option "xkb_layout" "de"
[ 1231.932] (**) Option "xkb_variant" "nodeadkeys"
[ 1231.932] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1231.934] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 1231.934] (II) No input driver specified, ignoring this device.
[ 1231.934] (II) This device may have been added with another device file.
[ 1231.934] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10)
[ 1231.934] (II) No input driver specified, ignoring this device.
[ 1231.934] (II) This device may have been added with another device file.
[ 1231.935] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event11)
[ 1231.935] (II) No input driver specified, ignoring this device.
[ 1231.935] (II) This device may have been added with another device file.
[ 1231.936] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event6)
[ 1231.936] (II) No input driver specified, ignoring this device.
[ 1231.936] (II) This device may have been added with another device file.
[ 1231.936] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event7)
[ 1231.936] (II) No input driver specified, ignoring this device.
[ 1231.936] (II) This device may have been added with another device file.
[ 1231.937] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event8)
[ 1231.937] (II) No input driver specified, ignoring this device.
[ 1231.937] (II) This device may have been added with another device file.
[ 1231.938] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 1231.938] (II) No input driver specified, ignoring this device.
[ 1231.938] (II) This device may have been added with another device file.
[ 1231.938] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/event4)
[ 1231.939] (**) Logitech USB RECEIVER: Applying InputClass "evdev pointer catchall"
[ 1231.939] (**) Logitech USB RECEIVER: Applying InputClass "evdev pointer catchall"
[ 1231.939] (II) Using input driver 'evdev' for 'Logitech USB RECEIVER'
[ 1231.939] (**) Logitech USB RECEIVER: always reports core events
[ 1231.939] (**) evdev: Logitech USB RECEIVER: Device: "/dev/input/event4"
[ 1231.939] (--) evdev: Logitech USB RECEIVER: Vendor 0x46d Product 0xc50e
[ 1231.939] (--) evdev: Logitech USB RECEIVER: Found 20 mouse buttons
[ 1231.939] (--) evdev: Logitech USB RECEIVER: Found scroll wheel(s)
[ 1231.939] (--) evdev: Logitech USB RECEIVER: Found relative axes
[ 1231.939] (--) evdev: Logitech USB RECEIVER: Found x and y relative axes
[ 1231.939] (II) evdev: Logitech USB RECEIVER: Configuring as mouse
[ 1231.939] (II) evdev: Logitech USB RECEIVER: Adding scrollwheel support
[ 1231.939] (**) evdev: Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5
[ 1231.939] (**) evdev: Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1231.939] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4/event4"
[ 1231.939] (II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE, id 8)
[ 1231.939] (II) evdev: Logitech USB RECEIVER: initialized for relative axes.
[ 1231.939] (**) Logitech USB RECEIVER: (accel) keeping acceleration scheme 1
[ 1231.939] (**) Logitech USB RECEIVER: (accel) acceleration profile 0
[ 1231.939] (**) Logitech USB RECEIVER: (accel) acceleration factor: 2.000
[ 1231.939] (**) Logitech USB RECEIVER: (accel) acceleration threshold: 4
[ 1231.940] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/mouse0)
[ 1231.940] (II) No input driver specified, ignoring this device.
[ 1231.940] (II) This device may have been added with another device file.
[ 1231.941] (II) config/udev: Adding input device cx88 IR (Hauppauge WinTV-HVR400 (/dev/input/event12)
[ 1231.941] (**) cx88 IR (Hauppauge WinTV-HVR400: Ignoring device from InputClass "Hauppauge WinTV Nova-HD-S2"
[ 1231.941] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 1231.942] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1231.942] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1231.942] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 1231.942] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1231.942] (**) AT Translated Set 2 keyboard: always reports core events
[ 1231.942] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 1231.942] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1231.942] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1231.942] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1231.942] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 1231.942] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 1231.942] (**) Option "xkb_rules" "evdev"
[ 1231.942] (**) Option "xkb_model" "pc104"
[ 1231.942] (**) Option "xkb_layout" "de"
[ 1231.942] (**) Option "xkb_variant" "nodeadkeys"
[ 1231.943] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 1231.943] (II) No input driver specified, ignoring this device.
[ 1231.943] (II) This device may have been added with another device file.
[ 1255.235] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1255.235] (II) intel(0): Using EDID range info for horizontal sync
[ 1255.235] (II) intel(0): Using EDID range info for vertical refresh
[ 1255.235] (II) intel(0): Printing DDC gathered Modelines:
[ 1255.235] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1255.235] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1255.235] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1255.235] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1255.235] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1258.823] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1258.823] (II) intel(0): Using hsync ranges from config file
[ 1258.823] (II) intel(0): Using vrefresh ranges from config file
[ 1258.823] (II) intel(0): Printing DDC gathered Modelines:
[ 1258.823] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1258.823] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1258.823] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1258.823] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1258.823] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1259.677] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1259.677] (II) intel(0): Using hsync ranges from config file
[ 1259.677] (II) intel(0): Using vrefresh ranges from config file
[ 1259.677] (II) intel(0): Printing DDC gathered Modelines:
[ 1259.678] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1259.678] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1259.678] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1259.678] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1259.678] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1260.572] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1260.575] (II) intel(0): Using hsync ranges from config file
[ 1260.575] (II) intel(0): Using vrefresh ranges from config file
[ 1260.575] (II) intel(0): Printing DDC gathered Modelines:
[ 1260.575] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1260.575] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1260.575] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1260.575] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1260.575] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1261.812] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1261.812] (II) intel(0): Using hsync ranges from config file
[ 1261.812] (II) intel(0): Using vrefresh ranges from config file
[ 1261.812] (II) intel(0): Printing DDC gathered Modelines:
[ 1261.812] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1261.812] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1261.812] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1261.813] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1261.813] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1262.744] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1262.744] (II) intel(0): Using hsync ranges from config file
[ 1262.744] (II) intel(0): Using vrefresh ranges from config file
[ 1262.744] (II) intel(0): Printing DDC gathered Modelines:
[ 1262.744] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1262.744] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1262.744] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1262.744] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1262.744] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1263.761] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1263.761] (II) intel(0): Using hsync ranges from config file
[ 1263.761] (II) intel(0): Using vrefresh ranges from config file
[ 1263.761] (II) intel(0): Printing DDC gathered Modelines:
[ 1263.761] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1263.761] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1263.761] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1263.761] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1263.761] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1264.845] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1264.845] (II) intel(0): Using hsync ranges from config file
[ 1264.845] (II) intel(0): Using vrefresh ranges from config file
[ 1264.845] (II) intel(0): Printing DDC gathered Modelines:
[ 1264.845] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1264.845] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1264.845] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1264.845] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1264.845] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1265.835] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1265.837] (II) intel(0): Using hsync ranges from config file
[ 1265.837] (II) intel(0): Using vrefresh ranges from config file
[ 1265.838] (II) intel(0): Printing DDC gathered Modelines:
[ 1265.838] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1265.838] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1265.838] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1265.838] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1265.838] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1327.284] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1332.332] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1332.332] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1332.332] (II) intel(0): switch to mode [email protected] on pipe 0 using DVI1, position (0, 0), rotation normal
[ 1332.734] (II) intel(0): EDID vendor "ENC", prod id 5769
[ 1332.734] (II) intel(0): Using hsync ranges from config file
[ 1332.734] (II) intel(0): Using vrefresh ranges from config file
[ 1332.734] (II) intel(0): Printing DDC gathered Modelines:
[ 1332.734] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1332.734] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1332.734] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1332.734] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1332.734] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1333.235] setversion 1.4 failed: Permission denied
[ 1346.132] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1346.132] (II) UnloadModule: "evdev"
[ 1346.133] (II) evdev: Logitech USB RECEIVER: Close
[ 1346.133] (II) UnloadModule: "evdev"
[ 1346.133] (II) evdev: Power Button: Close
[ 1346.133] (II) UnloadModule: "evdev"
[ 1346.133] (II) evdev: Power Button: Close
[ 1346.133] (II) UnloadModule: "evdev"
[ 1346.322] (EE) Server terminated successfully (0). Closing log file.
Building to run Linux / i686 (golem.site) Fr 13. Sep 00:37:54 | Building to run
Linux / i686 (golem.site) Di 1. Okt 14:57:07
proto/x11proto 6d4acb0e3a6568a8faaa651d4e3d32f917b9067b A | proto/x11proto
ed5a86761d96d4bdebda4f09071a49cbf4688d1b R
lib/libXau 899790011304c4029e15abf410e49ce7cec17e0a libXa | lib/libXau
304a11be4727c5a7feeb2501e8e001466f8ce84e XauFi
lib/libX11 cb107760df33ffc8630677e66e2e50aa37950a5c libX1 | lib/libX11
18a5278b008e9faa59b346fcab18a8d74b875fda makek
lib/libXt 8828fc21cb5b10f06294e460d15c38e234324960 Revert | lib/libXt
51d63a9d82dc4f2407862131bbf3e5d72b4505d3 Use $(
lib/libXaw a2d573ad309b4e717c5aef4635daa51e60a46db7 libXa | lib/libXaw
0543fa37ebdc48c0432425de80abc63235182085 Makef
> lib/libXaw3d
5e8370095b40d642505bc3129cb7c38aeb98247e Rem
pixman/ a4c79d695d52c94647b1aff78548e5892d616b70 Drop sup | pixman/
b513b3dffe979056dbbbdc8e0659f8018c51c5f5 blitters
mesa/drm b6da447c04ea3f243b56dc964bc8d43bba003ae2 freedre | mesa/drm
75f747b919e1b1cd852eeaa8e662e72273189fb2 radeon:
mesa/mesa 2b71b3d4666b076ef45d03b9b4b4c527bda21e1c mesa: | mesa/mesa
eb0a57acaa7026b3212742a30f4ada3271d95616 i915:
app/rstart 90600351e9f379b98ffac1b10cbf47b9787d1dc1 The s | app/rstart
1487cbd32df5227fea705d25f938a6e2401b2743 error
app/xauth 6dda11c17f2fdc47d43f269dccee98ec66cc8c4b Assume | app/xauth
58140dbbd39389ad6af58e201e055f3d4b92d368 Look f
app/xinit cdc39fd28649ea906dea8f58981d15d4b04a0a47 xinit | app/xinit
182920f156c87715d91b2f64b8781a0072af996e Fix wa
app/xinput 157d147fe10dd31d7c6a286c046348b8699ba9ea Fix v | app/xinput
1f812f44a3a22e27de00a447c34657e590231a76 Drop
xserver/ 47ff382d1fce25a8b097d45b79489e891f1f1228 Merge r | xserver/
7d3d4ae55dd6ee338439e2424ac423b1df80501b damage:
driver/xf86-video-intel 76790db4e6b33a439a6426ec73547904a |
driver/xf86-video-intel c724098f2215ff4f4193bbae3d8e42889
>
driver/xf86-video-modesetting e8bd7c2dc3329fa0da3078b6d2c
xkeyboard-config/ c2309b50e7ef7b9263278fd8ff73dda1484d72d |
xkeyboard-config/ aae40f98d6694e852c5e192f05643adbd16a325
xrestop 27ce94e4ec60b37ea75bc8f8f10020b258a475b5 config: | xrestop
59017f0bb0acdc5ab86cc5b40accf5f1e9c35b53 More man
_______________________________________________
[email protected]: X.Org development
Archives: http://lists.x.org/archives/xorg-devel
Info: http://lists.x.org/mailman/listinfo/xorg-devel
