Oops, sorry. I really must sleep more. I replied with a libinput patch to a synaptics patch.

As I no longer use synaptics and don't want to figure out whether the code there allows to say "this is a new finger", I just slap an ACK on the original patch.

16.09.2014 08:57, Alexander E. Patrakov wrote:
16.09.2014 07:08, Peter Hutterer wrote:
Touchpads are limited by a fixed sampling rate (usually 80Hz). Some
finger
changes may happen too fast for this sampling rate, resulting in two
distinct
event sequences:
* finger 1 up and finger 2 down in the same EV_SYN frame. Synaptics
sees one
   finger down before and after and the changed coordinates
* finger 1 up and finger 2 down _between_ two EV_SYN frames. Synaptics
sees one
   touchpoint move from f1 position to f2 position.

That move causes a large cursor jump. The former could be solved (with
difficulty) by adding fake EV_SYN handling after releasing touchpoints
but
that won't fix the latter case.

Hello.

Thanks for recognizing the problem and opting for a simple criterion for
detecting such jumps.

However, AFAICS, the patch just discards the motion without telling the
FSM that it is in fact a new touch. So it may be bad for gestures.

Attached is a patch that I use to work around this issue since July that
does attempt to tell the FSM about a different finger.

So as a solution for now limit the finger movement to 20mm per event.
Tests on a T440 and an x220 showed that this is just above what a
reasonable
finger movement would trigger. If a movement is greater than that
limit, reset
it to 0/0.

On devices without resolution, use 0.25 the touchpad's diagonal instead.

I have no objection to the resolution-aware threshold. My patch doesn't
have it, but you can obviously replace the heuristic there with your
version.


Signed-off-by: Peter Hutterer <[email protected]>
---
See the git repo below for a simple script to verify valid movement
deltas
on your device if you feel like it:
https://github.com/whot/input-data-analysis/tree/master/touchpad-max-delta

Max I got was 9mm on the x220 and 17mm on the T440s but the latter was
really ripping the cursor around the screen beyond what I'd deem useful.

  src/synaptics.c    | 33 +++++++++++++++++++++++++++++++++
  src/synapticsstr.h |  2 ++
  2 files changed, 35 insertions(+)

diff --git a/src/synaptics.c b/src/synaptics.c
index 2e3ad0c..756751d 100644
--- a/src/synaptics.c
+++ b/src/synaptics.c
@@ -780,6 +780,23 @@ set_default_parameters(InputInfoPtr pInfo)
          pars->resolution_vert = 1;
      }

+    /* Touchpad sampling rate is too low to detect all movements.
+       A user may lift one finger and put another one down within the
same
+       EV_SYN or even between samplings so the driver doesn't notice
at all.
+
+       We limit the movement to 20 mm within one event, that is more
than
+       recordings showed is needed (17mm on a T440).
+      */
+    if (pars->resolution_horiz > 1 &&
+        pars->resolution_vert > 1)
+        pars->maxDeltaMM = 20;
+    else {
+        /* on devices without resolution set the vector length to
0.25 of
+           the touchpad diagonal */
+        pars->maxDeltaMM = diag * 0.25;
+    }
+
+
      /* Warn about (and fix) incorrectly configured
TopEdge/BottomEdge parameters */
      if (pars->top_edge > pars->bottom_edge) {
          int tmp = pars->top_edge;
@@ -2229,6 +2246,13 @@ get_delta(SynapticsPrivate *priv, const struct
SynapticsHwState *hw,
      *dy = integral;
  }

+/* Vector length, but not sqrt'ed, we only need it for comparison */
+static inline double
+vlenpow2(double x, double y)
+{
+    return x * x + y * y;
+}
+
  /**
   * Compute relative motion ('deltas') including edge motion.
   */
@@ -2238,6 +2262,7 @@ ComputeDeltas(SynapticsPrivate * priv, const
struct SynapticsHwState *hw,
  {
      enum MovingState moving_state;
      double dx, dy;
+    double vlen;
      int delay = 1000000000;

      dx = dy = 0;
@@ -2283,6 +2308,14 @@ ComputeDeltas(SynapticsPrivate * priv, const
struct SynapticsHwState *hw,
   out:
      priv->prevFingers = hw->numFingers;

+    vlen = vlenpow2(dx/priv->synpara.resolution_horiz,
+                    dy/priv->synpara.resolution_vert);
+
+    if (vlen > priv->synpara.maxDeltaMM * priv->synpara.maxDeltaMM) {
+        dx = 0;
+        dy = 0;
+    }
+
      *dxP = dx;
      *dyP = dy;

diff --git a/src/synapticsstr.h b/src/synapticsstr.h
index 4bd32ac..75f52d5 100644
--- a/src/synapticsstr.h
+++ b/src/synapticsstr.h
@@ -226,6 +226,8 @@ typedef struct _SynapticsParameters {
      int area_left_edge, area_right_edge, area_top_edge,
area_bottom_edge;       /* area coordinates absolute */
      int softbutton_areas[4][4]; /* soft button area coordinates, 0
=> right, 1 => middle , 2 => secondary right, 3 => secondary middle
button */
      int hyst_x, hyst_y;         /* x and y width of hysteresis box */
+
+    int maxDeltaMM;               /* maximum delta movement (vector
length) in mm */
  } SynapticsParameters;

  struct _SynapticsPrivateRec {

_______________________________________________
[email protected]: X.Org development
Archives: http://lists.x.org/archives/xorg-devel
Info: http://lists.x.org/mailman/listinfo/xorg-devel

Reply via email to