On 13 May 2015 at 10:02, Show Liu <[email protected]> wrote: Hi Show liu, thank you for your sharing.
> Hi Xinliang, > > I just wanna share my experience on Arndale with you. > for me, I put all libraries on /usr/lib/mali/ then touch 1 conf file in > /etc/ld.so.conf.d/ > like mali.conf and echo the mali libraries path into it. > and renew the ld.cache using ldconfig. > i run the ldconfig manually and facing bellow msg. There might be something wrong with the libs compiling, right? I need to check my complie method, i think. Because i do the complie just on the target board not the way of cross compile. # ldconfig /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libEGL.so.1 is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libEGL.so.1.0.0 is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libGLESv2.so.2.0.0 is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libGLESv2.so.2 is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libMali.so is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libEGL.so is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libGLESv1_CM.so is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libGLESv1_CM.so.1 is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libGLESv1_CM.so.1.1 is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libGLESv2.so is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libGLESv2.so.2.0 is truncated /sbin/ldconfig.real: file /usr/lib/aarch64-linux-gnu/libEGL.so.1.4 is truncated Best regards, Xinliang > After startx, I can run the test program glmark2-es2. > > > Good luck! > > > Best Regards, > Show Liu > > On 13 May 2015 at 09:36, Xinliang Liu <[email protected]> wrote: > >> >> >> On 12 May 2015 at 21:03, Guillaume Tucker <[email protected]> >> wrote: >> Hi Guillaume, thank you for reply:-) >> >> > Then i run startx, i can see the desktop on the monitor. >>> > But i found that the X process doesn't load any EGL and GLES libs by >>> > seeing the info of /proc/X process ID/task/*/smaps file. >>> >>> Most X11 desktop environments use OpenGL, not OpenGL ES. Then like most >>> embedded GPUs, Mali-450 only supports OpenGL ES so the X11 desktop is >>> not hardware-accelerated. >>> >>> > [ 23.793] (II) GLX: no usable GL providers found for screen 0 >>> >>> This means that although X11 found a valid armsoc driver and is enabled >>> to run OpenGL ES apps it won't run desktop-like OpenGL apps or desktop >>> environments that need OpenGL. >>> >>> If you run an accelerated OpenGL ES X11 app such as es2gears then it >>> should work and use the Mali driver. I guess this is what es2_info is >>> trying to do except that it looks like something went wrong in your >>> driver build or configuration. That would take more investigation to >>> find out the actual cause; might be related to how GPU registers are >>> being used in the kernel, or how buffers are being used and shared with >>> user-space. >>> >> >> my armsoc video driver is simple, i past the patch bellow. >> Actually, since i didn't implement any custom gem but do implement the >> prime and dumb in the kernel DRM driver, >> so i implement the create_custom_gem function just with the >> DRM_IOCTL_MODE_CREATE_DUMB ioctl as show bellow. >> I am not sure it is ok or not? >> >> And my DDK configurations is : >> make TARGET_TOOLCHAIN=aarch64-linux-gcc TARGET_PLATFORM=default_8a >> CONFIG=debug VARIANT=mali450-gles-linux-x11-dma_buf >> >> i built both xf86-video-armsoc and DDK at target board. >> Anything wrong with me? >> >> Cheers, >> Xinliang >> --------------------------- xf86-video-armsoc implementation patch start >> ---------------------- >> +#include <xf86drm.h> >> +#include "../drmmode_driver.h" >> + >> +/* Cursor dimensions >> + * Technically we probably don't have any size limit.. since we >> + * are just using an overlay... but xserver will always create >> + * cursor images in the max size, so don't use width/height values >> + * that are too big >> + */ >> +/* width */ >> +/* width */ >> +#define CURSORW (64) >> +/* height */ >> +#define CURSORH (64) >> +/* Padding added down each side of cursor image */ >> +#define CURSORPAD (0) >> + >> +/* Optional function only for HWCURSOR_API_PLANE interface >> +static int init_plane_for_cursor(int drm_fd, uint32_t plane_id) >> +{ >> + return 0; >> +}*/ >> + >> +static int create_custom_gem(int fd, struct armsoc_create_gem >> *create_gem) >> +{ >> + struct drm_mode_create_dumb arg; >> + int ret; >> + >> + memset(&arg, 0, sizeof(arg)); >> + arg.width = create_gem->width; >> + arg.height = create_gem->height; >> + arg.bpp = create_gem->bpp; >> + >> + ret = drmIoctl(fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg); >> + if (ret) >> + return ret; >> + >> + create_gem->handle = arg.handle; >> + create_gem->pitch = arg.pitch; >> + create_gem->size = arg.size; >> + >> + return 0; >> +} >> + >> +struct drmmode_interface hisi_interface = { >> + 1 /* use_page_flip_events */, >> + 1 /* use_early_display */, >> + CURSORW /* cursor width */, >> + CURSORH /* cursor_height */, >> + CURSORPAD /* cursor padding */, >> + HWCURSOR_API_STANDARD /* cursor_api */, >> + NULL /* init_plane_for_cursor */, >> + 0 /* vblank_query_supported */, >> + create_custom_gem /* create_custom_gem */, >> +}; >> + >> +struct drmmode_interface *drmmode_interface_get_implementation(int >> drm_fd) >> +{ >> + return &hisi_interface; >> +} >> + >> --------------------------- xf86-video-armsoc implementation patch end >> ---------------------- >> >>> >>> Cheers, >>> Guillaume >>> >>> On 12/05/15 13:30, Xinliang Liu wrote: >>> >>>> Hello, >>>> Recently, i am working on enabling mali 450 gpu at debian xorg X windows >>>> for hikey board which is one of 96boards <https://www.96boards.org/>. >>>> >>>> >>>> I first implement xf86-video-armsoc(ver1.1.0) video driver, compile and >>>> cp armsoc_drv.so to directory "/usr/lib/xorg/modules/drivers". >>>> And then compile arm mali r5p0 DDK and cp egl and gles libs(libEGL.so >>>> libEGL.so.1 libEGL.so.1.4 libGLESv1_CM.so libGLESv1_CM.so.1 >>>> libGLESv1_CM.so.1.1 libGLESv2.so libGLESv2.so.2 libGLESv2.so.2.0 >>>> libMali.so) to directory "/usr/lib/aarch64-linux-gnu/" or "/usr/lib". >>>> >>>> my xorg.conf is show as bellow: >>>> ----------------------------xorg.conf start-------------------------- >>>> cat /etc/X11/xorg.conf >>>> Section "Device" >>>> Identifier "Card0" >>>> Driver "armsoc" >>>> EndSection >>>> >>>> Section "Screen" >>>> Identifier "Screen0" >>>> Device "Card0" >>>> DefaultDepth 24 >>>> EndSection >>>> ----------------------------xorg.conf end-------------------------- >>>> Then i run startx, i can see the desktop on the monitor. >>>> But i found that the X process doesn't load any EGL and GLES libs by >>>> seeing the info of /proc/X process ID/task/*/smaps file. >>>> And even when i run #es2_info , i get bellow error: >>>> ----------------------------es2_info log >>>> start-------------------------- >>>> # es2_info >>>> [ 1010.459771] es2_info[1858]: unhandled level 3 translation fault (7) >>>> at 0x7f9dbe66b0, esr 0x92000047 >>>> [ 1010.468920] pgd = ffffffc03209b000 >>>> [ 1010.472324] [7f9dbe66b0] *pgd=000000003aad5003, >>>> *pud=000000003aad5003, *pmd=00000000384ae003, *pte=0000000000000000 >>>> [ 1010.482838] >>>> [ 1010.484335] CPU: 2 PID: 1858 Comm: es2_info Tainted: G W >>>> 3.18.0-linaro-hikey #37 >>>> [ 1010.492802] task: ffffffc032b28780 ti: ffffffc0329c0000 task.ti: >>>> ffffffc0329c0000 >>>> [ 1010.500322] PC is at 0x7f9dbfd744 >>>> [ 1010.503639] LR is at 0x7f9dbecbb0 >>>> [ 1010.507000] pc : [<0000007f9dbfd744>] lr : [<0000007f9dbecbb0>] >>>> pstate: 20000000 >>>> [ 1010.514402] sp : 0000007fffe87800 >>>> [ 1010.517764] x29: 0000007fffe87930 x28: 0000007f9dc0f570 >>>> [ 1010.523098] x27: 0000007fffe87bb0 x26: 0000007fffe87830 >>>> [ 1010.528473] x25: 0000000000000001 x24: 0000007fffe87b70 >>>> [ 1010.533806] x23: 0000000000000000 x22: 0000000000000002 >>>> [ 1010.539179] x21: 0000000000000006 x20: 0000007f9dc12000 >>>> [ 1010.544511] x19: 00000000002c9978 x18: 0000000000000000 >>>> [ 1010.549886] x17: 0000007f9dbfa8d0 x16: 0000007f9dc13000 >>>> [ 1010.555259] x15: 0000007f9dbfa338 x14: 0000007f9dbfa410 >>>> [ 1010.560594] x13: 00000000002ca6af x12: 0000000000007978 >>>> [ 1010.565965] x11: 0000007f9d91d000 x10: 0000007fffe87860 >>>> [ 1010.571299] x9 : 0000000000000004 x8 : 0000007f9dbe66b0 >>>> [ 1010.576672] x7 : 0000000000000000 x6 : 000000000000003f >>>> [ 1010.582006] x5 : 0000000000000040 x4 : 0000000000000010 >>>> [ 1010.587382] x3 : 00000000000002b8 x2 : 00000000000002b8 >>>> [ 1010.592716] x1 : 0000000000000000 x0 : 0000007f9dbe66b0 >>>> [ 1010.598088] >>>> Bus error >>>> ---------------------------es2_info log end-------------------------- >>>> >>>> >>>> What's wrong? >>>> Am I missing something on integrating xf86-video-armsoc? >>>> And why X doesn't load any EGL and GLES so libs? >>>> I paste the Xorg.0.log at the end. >>>> Please tell me if you know what's going wrong, thanks. >>>> >>>> Best regards, >>>> -Xinliang Liu >>>> >>>> >>>> >>>> ----------------------------Xorg.0.log start-------------------------- >>>> cat /var/log/Xorg.0.log >>>> [ 23.704] >>>> X.Org X Server 1.16.4 >>>> Release Date: 2014-12-20 >>>> [ 23.704] X Protocol Version 11, Revision 0 >>>> [ 23.704] Build Operating System: Linux 3.16.0-4-arm64 aarch64 Debian >>>> [ 23.704] Current Operating System: Linux linaro-alip >>>> 3.18.0-linaro-hikey #37 SMP PREEMPT Tue May 12 19:01:21 HKT 2015 aarch64 >>>> [ 23.704] Kernel command line: iommu_ddr_size=0x40000000 console=tty0 >>>> console=ttyAMA0,115200n8 loglevel=7 root=/dev/mmcblk0p7 rootwait rw >>>> mem=908M boardid=0x48696220,0x00000011,0x0000002b >>>> thermal_trim=0xb6aaaa09 pd_charge=0 boottype=defaultnormal >>>> enter_recovery=0 androidboot.swtype=normal fastboot_version= himn >>>> [ 23.704] Build Date: 11 February 2015 01:19:23AM >>>> [ 23.704] xorg-server 2:1.16.4-1 (http://www.debian.org/support) >>>> [ 23.704] Current version of pixman: 0.32.6 >>>> [ 23.704] Before reporting problems, check http://wiki.x.org >>>> to make sure that you have the latest version. >>>> [ 23.704] Markers: (--) probed, (**) from config file, (==) default >>>> setting, >>>> (++) from command line, (!!) notice, (II) informational, >>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >>>> [ 23.705] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 12 >>>> 09:11:51 2015 >>>> [ 23.705] (==) Using config file: "/etc/X11/xorg.conf" >>>> [ 23.705] (==) Using system config directory >>>> "/usr/share/X11/xorg.conf.d" >>>> [ 23.706] (==) No Layout section. Using the first Screen section. >>>> [ 23.706] (**) |-->Screen "Screen0" (0) >>>> [ 23.706] (**) | |-->Monitor "<default monitor>" >>>> [ 23.707] (**) | |-->Device "Card0" >>>> [ 23.707] (==) No monitor specified for screen "Screen0". >>>> Using a default monitor configuration. >>>> [ 23.707] (==) Automatically adding devices >>>> [ 23.707] (==) Automatically enabling devices >>>> [ 23.707] (==) Automatically adding GPU devices >>>> [ 23.707] (WW) The directory "/usr/share/fonts/X11/misc" does not >>>> exist. >>>> [ 23.707] Entry deleted from font path. >>>> [ 23.707] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not >>>> exist. >>>> [ 23.707] Entry deleted from font path. >>>> [ 23.707] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not >>>> exist. >>>> [ 23.707] Entry deleted from font path. >>>> [ 23.707] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not >>>> exist. >>>> [ 23.707] Entry deleted from font path. >>>> [ 23.707] (WW) The directory "/usr/share/fonts/X11/Type1" does not >>>> exist. >>>> [ 23.707] Entry deleted from font path. >>>> [ 23.707] (WW) The directory "/usr/share/fonts/X11/100dpi" does not >>>> exist. >>>> [ 23.707] Entry deleted from font path. >>>> [ 23.707] (WW) The directory "/usr/share/fonts/X11/75dpi" does not >>>> exist. >>>> [ 23.707] Entry deleted from font path. >>>> [ 23.707] (==) FontPath set to: >>>> built-ins >>>> [ 23.707] (==) ModulePath set to "/usr/lib/xorg/modules" >>>> [ 23.707] (II) The server relies on udev to provide the list of input >>>> devices. >>>> If no devices become available, reconfigure udev or disable >>>> AutoAddDevices. >>>> [ 23.707] (II) Loader magic: 0x7fa49a7ce8 >>>> [ 23.707] (II) Module ABI versions: >>>> [ 23.707] X.Org ANSI C Emulation: 0.4 >>>> [ 23.707] X.Org Video Driver: 18.0 >>>> [ 23.708] X.Org XInput driver : 21.0 >>>> [ 23.708] X.Org Server Extension : 8.0 >>>> [ 23.708] (II) xfree86: Adding drm device (/dev/dri/card0) >>>> [ 23.709] (II) no primary bus or device found >>>> [ 23.709] falling back to >>>> /sys/devices/smb/smb:display-subsystem/drm/card0 >>>> [ 23.709] (II) LoadModule: "glx" >>>> [ 23.710] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >>>> [ 23.717] (II) Module glx: vendor="X.Org Foundation" >>>> [ 23.717] compiled for 1.16.4, module version = 1.0.0 >>>> [ 23.717] ABI class: X.Org Server Extension, version 8.0 >>>> [ 23.717] (==) AIGLX enabled >>>> [ 23.718] (II) LoadModule: "armsoc" >>>> [ 23.718] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so >>>> [ 23.718] (II) Module armsoc: vendor="X.Org Foundation" >>>> [ 23.718] compiled for 1.16.4, module version = 1.1.0 >>>> [ 23.718] Module class: X.Org Video Driver >>>> [ 23.718] ABI class: X.Org Video Driver, version 18.0 >>>> [ 23.718] (II) ARMSOC: Driver for ARM Mali compatible chipsets >>>> [ 23.718] (++) using VT number 7 >>>> >>>> [ 23.719] (WW) Falling back to old probe method for armsoc >>>> [ 23.719] (II) No BusID or DriverName specified - opening >>>> /dev/dri/card0 >>>> [ 23.719] (II) Got BusID platform:smb:display-subsystem:00 >>>> [ 23.719] (II) Opened DRM >>>> [ 23.719] (II) DeviceName is [/dev/dri/card0] >>>> [ 23.719] (II) bus_id is [platform:smb:display-subsystem:00] >>>> [ 23.719] (II) DriverName is [hisi] >>>> [ 23.719] (II) version is [1.0.0] >>>> [ 23.719] (II) Screen:0, CRTC:-1 >>>> [ 23.720] (II) ARMSOC(0): Creating default Display subsection in >>>> Screen section >>>> "Screen0" for depth/fbbpp 24/32 >>>> [ 23.720] (**) ARMSOC(0): Depth 24, (--) framebuffer bpp 32 >>>> [ 23.720] (==) ARMSOC(0): RGB weight 888 >>>> [ 23.720] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0) >>>> [ 23.720] (==) ARMSOC(0): Default visual is TrueColor >>>> [ 23.720] (II) No BusID or DriverName specified - opening >>>> /dev/dri/card0 >>>> [ 23.720] (II) Got BusID platform:smb:display-subsystem:00 >>>> [ 23.720] (II) Opened DRM >>>> [ 23.720] (II) DeviceName is [/dev/dri/card0] >>>> [ 23.720] (II) bus_id is [platform:smb:display-subsystem:00] >>>> [ 23.720] (II) DriverName is [hisi] >>>> [ 23.720] (II) version is [1.0.0] >>>> [ 23.720] (II) ARMSOC(0): Chipset: Mali >>>> [ 23.720] (II) ARMSOC(0): Buffer Flipping is Enabled >>>> [ 23.720] (II) ARMSOC(0): Setting the video modes ... >>>> [ 23.721] (II) ARMSOC(0): Adding all CRTCs >>>> [ 23.721] (II) ARMSOC(0): Got CRTC: 0 (id: 6) >>>> [ 23.725] (II) ARMSOC(0): Output HDMI-1 has no monitor section >>>> [ 23.730] (II) ARMSOC(0): Printing probed modes for output HDMI-1 >>>> [ 23.730] (II) ARMSOC(0): Modeline "1280x720"x60.6 75.00 1280 1500 >>>> 1540 1650 720 740 745 750 -hsync -vsync (45.5 kHz e) >>>> [ 23.730] (II) ARMSOC(0): Output HDMI-1 connected >>>> [ 23.730] (II) ARMSOC(0): Using sloppy heuristic for initial modes >>>> [ 23.730] (II) ARMSOC(0): Output HDMI-1 using initial mode 1280x720 >>>> [ 23.730] (II) ARMSOC(0): Got KMS resources >>>> [ 23.730] (==) ARMSOC(0): DPI set to (96, 96) >>>> [ 23.730] (II) Loading sub module "dri2" >>>> [ 23.730] (II) LoadModule: "dri2" >>>> [ 23.730] (II) Module "dri2" already built-in >>>> [ 23.730] (II) Loading sub module "exa" >>>> [ 23.730] (II) LoadModule: "exa" >>>> [ 23.731] (II) Loading /usr/lib/xorg/modules/libexa.so >>>> [ 23.731] (II) Module exa: vendor="X.Org Foundation" >>>> [ 23.731] compiled for 1.16.4, module version = 2.6.0 >>>> [ 23.731] ABI class: X.Org Video Driver, version 18.0 >>>> [ 23.731] (II) Loading sub module "fb" >>>> [ 23.731] (II) LoadModule: "fb" >>>> [ 23.732] (II) Loading /usr/lib/xorg/modules/libfb.so >>>> [ 23.732] (II) Module fb: vendor="X.Org Foundation" >>>> [ 23.732] compiled for 1.16.4, module version = 1.0.0 >>>> [ 23.732] ABI class: X.Org ANSI C Emulation, version 0.4 >>>> [ 23.732] (--) Depth 24 pixmap format is 32 bpp >>>> [ 23.734] (II) ARMSOC(0): Soft EXA mode >>>> [ 23.734] (II) EXA(0): Driver allocated offscreen pixmaps >>>> [ 23.735] (II) EXA(0): Driver registered support for the following >>>> operations: >>>> [ 23.735] (II) Solid >>>> [ 23.735] (II) Copy >>>> [ 23.735] (II) Composite (RENDER acceleration) >>>> [ 23.735] (II) ARMSOC(0): Setting swap chain size: 2 >>>> [ 23.735] (II) ARMSOC(0): [DRI2] Setup complete >>>> [ 23.735] (II) ARMSOC(0): [DRI2] DRI driver: armsoc >>>> [ 23.735] (==) ARMSOC(0): Backing store enabled >>>> [ 23.735] (==) ARMSOC(0): Silken mouse enabled >>>> [ 23.735] (II) ARMSOC(0): HW cursor init() >>>> [ 23.735] (II) ARMSOC(0): HW cursor initialized >>>> [ 23.763] (II) ARMSOC(0): RandR 1.2 enabled, ignore the following >>>> RandR disabled message. >>>> [ 23.764] (==) ARMSOC(0): DPMS enabled >>>> [ 23.764] (--) RandR disabled >>>> [ 23.790] (II) SELinux: Disabled on system >>>> [ 23.793] (EE) AIGLX error: dlopen of >>>> /usr/lib/aarch64-linux-gnu/dri/armsoc_dri.so failed >>>> (/usr/lib/aarch64-linux-gnu/dri/armsoc_dri.so: cannot open shared object >>>> file: No su) >>>> [ 23.793] (EE) AIGLX: reverting to software rendering >>>> [ 23.793] (EE) AIGLX error: dlopen of >>>> /usr/lib/aarch64-linux-gnu/dri/swrast_dri.so failed >>>> (/usr/lib/aarch64-linux-gnu/dri/swrast_dri.so: cannot open shared object >>>> file: No su) >>>> [ 23.793] (EE) GLX: could not load software renderer >>>> [ 23.793] (II) GLX: no usable GL providers found for screen 0 >>>> [ 23.793] (II) ARMSOC(0): Setting screen physical size to 338 x 190 >>>> [ 23.880] (II) config/udev: Adding input device USB OPTICAL MOUSE >>>> (/dev/input/event0) >>>> [ 23.880] (**) USB OPTICAL MOUSE : Applying InputClass "evdev pointer >>>> catchall" >>>> [ 23.880] (II) LoadModule: "evdev" >>>> [ 23.881] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so >>>> [ 23.882] (II) Module evdev: vendor="X.Org Foundation" >>>> [ 23.882] compiled for 1.16.0, module version = 2.9.0 >>>> [ 23.882] Module class: X.Org XInput Driver >>>> [ 23.882] ABI class: X.Org XInput driver, version 21.0 >>>> [ 23.882] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE ' >>>> [ 23.882] (**) USB OPTICAL MOUSE : always reports core events >>>> [ 23.882] (**) evdev: USB OPTICAL MOUSE : Device: "/dev/input/event0" >>>> [ 23.882] (--) evdev: USB OPTICAL MOUSE : Vendor 0x101 Product 0x7 >>>> [ 23.882] (--) evdev: USB OPTICAL MOUSE : Found 9 mouse buttons >>>> [ 23.883] (--) evdev: USB OPTICAL MOUSE : Found scroll wheel(s) >>>> [ 23.883] (--) evdev: USB OPTICAL MOUSE : Found relative axes >>>> [ 23.883] (--) evdev: USB OPTICAL MOUSE : Found x and y relative axes >>>> [ 23.883] (II) evdev: USB OPTICAL MOUSE : Configuring as mouse >>>> [ 23.883] (II) evdev: USB OPTICAL MOUSE : Adding scrollwheel support >>>> [ 23.883] (**) evdev: USB OPTICAL MOUSE : YAxisMapping: buttons 4 >>>> and 5 >>>> [ 23.883] (**) evdev: USB OPTICAL MOUSE : EmulateWheelButton: 4, >>>> EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>>> [ 23.883] (**) Option "config_info" >>>> >>>> "udev:/sys/devices/f72c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:0101:0007.0001/input/input0/event0" >>>> [ 23.883] (II) XINPUT: Adding extended input device "USB OPTICAL >>>> MOUSE " (type: MOUSE, id 6) >>>> [ 23.883] (II) evdev: USB OPTICAL MOUSE : initialized for relative >>>> axes. >>>> [ 23.884] (**) USB OPTICAL MOUSE : (accel) keeping acceleration >>>> scheme 1 >>>> [ 23.884] (**) USB OPTICAL MOUSE : (accel) acceleration profile 0 >>>> [ 23.884] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000 >>>> [ 23.884] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4 >>>> [ 23.885] (II) config/udev: Adding input device USB OPTICAL MOUSE >>>> (/dev/input/mouse0) >>>> [ 23.885] (II) No input driver specified, ignoring this device. >>>> [ 23.885] (II) This device may have been added with another device >>>> file. >>>> [ 23.886] (II) config/udev: Adding input device SIGMACHIP USB >>>> Keyboard (/dev/input/event1) >>>> [ 23.886] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev >>>> keyboard catchall" >>>> [ 23.886] (II) Using input driver 'evdev' for 'SIGMACHIP USB >>>> Keyboard' >>>> [ 23.886] (**) SIGMACHIP USB Keyboard: always reports core events >>>> [ 23.886] (**) evdev: SIGMACHIP USB Keyboard: Device: >>>> "/dev/input/event1" >>>> [ 23.886] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product >>>> 0x2 >>>> [ 23.886] (--) evdev: SIGMACHIP USB Keyboard: Found keys >>>> [ 23.886] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard >>>> [ 23.887] (**) Option "config_info" >>>> >>>> "udev:/sys/devices/f72c0000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:1C4F:0002.0002/input/input1/event1" >>>> [ 23.887] (II) XINPUT: Adding extended input device "SIGMACHIP USB >>>> Keyboard" (type: KEYBOARD, id 7) >>>> [ 23.887] (**) Option "xkb_rules" "evdev" >>>> [ 23.887] (**) Option "xkb_model" "pc105" >>>> [ 23.887] (**) Option "xkb_layout" "us" >>>> [ 23.889] (II) config/udev: Adding input device SIGMACHIP USB >>>> Keyboard (/dev/input/event2) >>>> [ 23.889] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev >>>> keyboard catchall" >>>> [ 23.889] (II) Using input driver 'evdev' for 'SIGMACHIP USB >>>> Keyboard' >>>> [ 23.889] (**) SIGMACHIP USB Keyboard: always reports core events >>>> [ 23.889] (**) evdev: SIGMACHIP USB Keyboard: Device: >>>> "/dev/input/event2" >>>> [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product >>>> 0x2 >>>> [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found 1 mouse buttons >>>> [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found scroll wheel(s) >>>> [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found relative axes >>>> [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Forcing relative x/y >>>> axes to exist. >>>> [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found absolute axes >>>> [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Forcing absolute x/y >>>> axes to exist. >>>> [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found keys >>>> [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Configuring as mouse >>>> [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard >>>> [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Adding scrollwheel >>>> support >>>> [ 23.889] (**) evdev: SIGMACHIP USB Keyboard: YAxisMapping: buttons 4 >>>> and 5 >>>> [ 23.889] (**) evdev: SIGMACHIP USB Keyboard: EmulateWheelButton: 4, >>>> EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>>> [ 23.890] (**) Option "config_info" >>>> >>>> "udev:/sys/devices/f72c0000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1C4F:0002.0003/input/input2/event2" >>>> [ 23.890] (II) XINPUT: Adding extended input device "SIGMACHIP USB >>>> Keyboard" (type: KEYBOARD, id 8) >>>> [ 23.890] (**) Option "xkb_rules" "evdev" >>>> [ 23.890] (**) Option "xkb_model" "pc105" >>>> [ 23.890] (**) Option "xkb_layout" "us" >>>> [ 23.890] (II) evdev: SIGMACHIP USB Keyboard: initialized for >>>> relative axes. >>>> [ 23.890] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes. >>>> [ 23.891] (**) SIGMACHIP USB Keyboard: (accel) keeping acceleration >>>> scheme 1 >>>> [ 23.891] (**) SIGMACHIP USB Keyboard: (accel) acceleration profile 0 >>>> [ 23.891] (**) SIGMACHIP USB Keyboard: (accel) acceleration factor: >>>> 2.000 >>>> [ 23.891] (**) SIGMACHIP USB Keyboard: (accel) acceleration >>>> threshold: 4 >>>> [ 24.324] (II) evdev: SIGMACHIP USB Keyboard: Close >>>> [ 24.325] (II) UnloadModule: "evdev" >>>> [ 24.325] (II) evdev: SIGMACHIP USB Keyboard: Close >>>> [ 24.326] (II) UnloadModule: "evdev" >>>> [ 24.326] (II) evdev: USB OPTICAL MOUSE : Close >>>> [ 24.326] (II) UnloadModule: "evdev" >>>> [ 24.332] (EE) Server terminated successfully (0). Closing log file. >>>> ----------------------------Xorg.0.log end--------------------------- >>>> >>>> >>> -- IMPORTANT NOTICE: The contents of this email and any attachments are >>> confidential and may also be privileged. If you are not the intended >>> recipient, please notify the sender immediately and do not disclose the >>> contents to any other person, use it for any purpose, or store or copy the >>> information in any medium. Thank you. >>> >>> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >>> Registered in England & Wales, Company No: 2557590 >>> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 >>> 9NJ, Registered in England & Wales, Company No: 2548782 >>> >>> >> >
_______________________________________________ [email protected]: X.Org development Archives: http://lists.x.org/archives/xorg-devel Info: http://lists.x.org/mailman/listinfo/xorg-devel
