Alex Deucher a écrit : > On 9/18/07, giggz <[EMAIL PROTECTED]> wrote: >> Alex Deucher a écrit : >>> On 9/18/07, GiGGz <[EMAIL PROTECTED]> wrote: >>>> Hi, >>>> >>>> With the old driver I use MergedFB in order to have a "big desktop". I >>>> have a laptop and a CRT. With normal configuration I get (with the old >>>> driver) clone mode when I turn on my CRT. With a different Xorg.conf >>>> (see xorg.conf at the end) I could have an extended desktop on my LCD >>>> and my CRT. I have read that now the MergedFB option have been diseabled >>>> and we must use RandR...how can I do that, in order to have an extended >>>> desktop ? (with two different resolutions...) >>> you'll need to add a virtual line to your config set to the max size >>> desktop you want to use, e.g.,: >>> >>> Subsection "Display" >>> Depth 24 >>> Virtual 2680 1050 >>> Modes "1400x1050" >>> EndSubSection >>> >>> then >>> >>> dualhead: >>> xrandr --output VGA-0 --right-of LVDS >>> >>> turn vga port off: >>> xrandr --output VGA-0 --off >>> >>> etc. See xrandr --help for more. >>> >>> Alex >> Ok...but it seems that my crt is not found... when I launch xrandr -q i >> get that : >> >> Screen 0: minimum 320 x 175, current 1400 x 1050, maximum 1400 x 1050 >> default connected 1400x1050+0+0 0mm x 0mm >> 1400x1050 60.0* >> 1280x1024 60.0 >> 1280x960 60.0 >> 1280x800 60.0 >> 1280x768 60.0 >> 1152x864 60.0 >> 1152x768 60.0 >> 1024x768 60.0 >> 960x720 60.0 >> 960x600 60.0 >> 928x696 60.0 >> 896x672 60.0 >> 840x525 60.0 >> 832x624 60.0 >> 800x600 60.0 >> 800x512 60.0 >> 720x450 60.0 >> 720x400 60.0 >> 700x525 60.0 >> 640x512 60.0 >> 640x480 60.0 >> 640x400 60.0 >> 640x384 60.0 >> 640x350 60.0 >> 576x432 60.0 >> 576x384 60.0 >> 512x384 60.0 >> 416x312 60.0 >> 400x300 60.0 >> 360x200 60.0 >> 320x240 60.0 >> 320x200 60.0 >> 320x175 60.0 >> >> >> So I can't do anything else...and when I put the line with virtual in my >> xorg.conf I have a big desktop but on a screen...so it's not an extended >> desktop. The desktop is bigger that my screen... >> >> is there a tip to have a detected crt monitor ? > > something is wrong with your install. Either you have an old version > of xrandr or the randr proto or there's a problem with your xserver or > you are running an old version of the ati driver. > > Alex
I have compiled my kernel and I have activated radeonfb. Can radeonfb be the cause of my problem ? I'm running under debian SID. Thx _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
