http://bugs.freedesktop.org/show_bug.cgi?id=12544
------- Comment #6 from [EMAIL PROTECTED] 2007-11-20 14:56 PST ------- (In reply to comment #5) > It appears to work with AGP 1x as well. > > I read somewhere that setting these old radeons to higher AGP modes (or modes > other than that set by the BIOS) causes trouble. Did the default change from > 1x > to 2x recently? It changed from 1x to whatever was set before (excluding fast writes) by the BIOS by default, since there were some problems with the old scheme. Since this works for you with AGP 1x, it indeed looks like AGP 2x doesn't work stable for your setup. Which is pretty weird, I've never heard of BX chipset making trouble with AGP 2x (I've certainly used that), nor that 9200 would be problematic with AGP 2x. (That is, unless you overclock the FSB to 133 on these boards which will give you 89Mhz AGP instead of 66, or have one of those with a AGPFS jumper which will give 100Mhz AGP clock at 100Mhz FSB if set wrong). The only radeons I know of being problematic with AGP are some early radeon 9700 which had problems with some chipsets at AGP 8x speed. Just to clarify, you have two different rv280-based cards which don't work stable at AGP 2x but work at AGP 1x in two completely different boards? -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
