http://bugs.freedesktop.org/show_bug.cgi?id=13412
------- Comment #7 from [EMAIL PROTECTED] 2007-11-30 22:29 PST ------- (In reply to comment #5) > Created an attachment (id=12887) --> (http://bugs.freedesktop.org/attachment.cgi?id=12887&action=view) [details] > Xorg.log when V1100 monitor is on VGA-0 and P1100 monitor is on DVI-0 > > Compaq V1100 is connected to VGA-0 and Compaq P1100 is connected to DVI-0. > Now, the V1100 is the only monitor turned on and the P1100 is off. > Apparently the V1100 doesn't have an edid, so we don't know what modes it supports. you can add add the sync ranges, etc. to a monitor section associated with the output. > I am not sure why the V1100 is at the 1280x800 resolution, it can easily > handle > 1600x1200. Same xorg.conf file as before. On the primary dac we are able to use load detection to see if a monitor is attached. In this case, we find one, but since it has no edid, the server just added the default sync ranges and modes. > > > $ xrandr -q > Screen 0: minimum 320 x 200, current 1280 x 800, maximum 3200 x 1200 > VGA-0 connected 1280x800+0+0 (normal left inverted right) 0mm x 0mm > 1280x800 60.0* > 1280x768 60.0 > 1024x768 60.0 > 800x600 60.3 > 640x480 59.9 > DVI-0 disconnected (normal left inverted right) > S-video disconnected (normal left inverted right) > This doesn't seem right. The log clearly shows an edid on the monitor on the dvi port initially. later in the log it disappears. are you sure you didn't disconnect the monitor on the dvi port at some point? -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
